User manual BT7900 Register your product and get support at www.philips.
Contents 1 Important Safety Notice 2 Your Bluetooth speaker Introduction What's in the box Overview of the speaker 3 Get started Turn on/off Check the battery level Charge the built-in battery 4 Play from Bluetooth devices Connect a Bluetooth device Play from a connected Bluetooth device Disconnect a device Reconnect a device Clear pairing information Control your phone call 5 Other features Listen to an external device Adjust volume Attach the lanyard cable 6 Specifications 7 Troubleshooting Genera
1 Important Safety Warning •• Never remove the casing of this speaker. •• Never place this speaker on other electrical equipment. •• Keep this speaker away from direct sunlight, naked flames or heat. • Only use attachments or accessories specified by the manufacturer. The battery shall not be exposed to excessive heat such as sunshine, fire or the like. Do not place any sources of danger on the speaker (e.g. lighted candles).
• • • Increase the separation between equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
regarding the disposal of packaging materials, exhausted batteries and old equipment. Trademark notice The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Gibson Innovations Limited is under license. Other trademarks and trade names are those of their respective owners. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. Quick Charge is a trademark of Qualcomm Incorporated.
Overview of the speaker 3 Get started Always follow the instructions in this chapter in sequence. Turn on/off a -/+ • Adjust volume. • b Battery level indicators • Show the charging progress. • Show the battery level. c d e • • Enter Bluetooth pairing mode. Clear Bluetooth pairing information. • • • Turn the speaker on or off. Check the battery level. Show the Bluetooth status. • In Bluetooth mode, press to pause or resume play. In Bluetooth mode, press twice to play the next track.
Check the battery level The speaker is powered by the built-in rechargeable battery. After power-on, the speaker shows the battery level immediately, and the battery indication disappears in five seconds. • To manually check the battery level, briefly press in either power-on or power-off mode. »» The different behavior of the four LEDs indicates different battery levels. LED indication: Charge the built-in battery Note •• It takes you approximately three hours to fully charge the battery.
• Connect the speaker to AC power by using a power adaptor (not supplied; 5V 2.1 A adaptor recommended). System Battery status status System behavior On During charging Beep once, without charging indication. Off During charging Shows the charging indication Off Fully charged All LEDs are on, then turn off after three minutes.
4 Play from Bluetooth devices With this speaker, you can listen to audio from Bluetooth-enabled devices and control the incoming call through Bluetooth. 2 3 On your Bluetooth device, enable Bluetooth and search for Bluetooth devices that can be paired (see the user manual of the device). Select [Philips BT7900] displayed on your device for pairing. If necessary, input “0000” as the pairing password. »» After successful connection, the speaker beeps twice, and the LED turns solid blue.
After successful Bluetooth connection, play audio on the connected device. »» Audio streams from your Bluetooth device to the speaker. • • To pause or resume play, press . To play the next track, press twice. Tip •• You can also use your Bluetooth device to control play. Control your phone call After Bluetooth connection, you can control an incoming call with this speaker. Button Function Press to answer an incoming call. Press and hold for two seconds to reject an incoming call.
5 Other features Listen to an external device With this speaker, you can also listen to an external audio device such as an MP3 player. Adjust volume During music playback, press -/+ to increase or decrease volume. Tip •• You can press and hold -/+ to increase or decrease volume continuously. •• When the volume reaches the maximum, the speaker beeps twice. Note •• Make sure that music playback through Bluetooth is stopped.
6 Specifications Note •• Product information is subject to change Dimensions - Main unit (W x H x D) Weight - Main unit 201 x 71 x 72 mm 0.53 kg without prior notice. Rated output power (Amplifier) 2 x 7W RMS ≤ 1% THD Acoustic frequency response 65-20000 Hz Speaker driver 2 x 1.5” full range, 4 Ω Bass enhancement 2 x 2.25” passive radiator Bluetooth version V2.1 + EDR Bluetooth supported profiles AVRCP V1.4, A2DP V1.2, HFP V1.5 Bluetooth frequency band / Output power 2.402GHz ~ 2.
7 Trouble shooting •• If the issue remains, when the speaker is switched on, hold both the + and keys at the same time for 7 seconds until the speaker is off. Then wait for the speaker to reset and switch on again automatically. Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service.
2017 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. BT7900_37_UM_V1.
