Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 2 Notice 3 3 Your Micro System 5 Introduction What's in the box Overview of the main unit Overview of the remote control 4 Get started Placement Prepare FM/DAB+ antenna Prepare the remote control Connect power Set clock Turn on 5 Play Play disc Play from a USB storage device Play from Bluetooth-enabled devices Control play (CD/USB mode) Program tracks Adjust sound Display different information 6 Listen to DAB+ radio For first-time use Store DAB+ radio stations automaticall
1 Important Warning •• Never remove the casing of this micro system. •• Never lubricate any part of this system. •• Never place this system on other electrical equipment. •• Never look into the laser beam inside this system. •• Keep this system away from direct sunlight, naked flames or heat. •• Make sure that you always have easy access to the power cord, plug or adaptor to disconnect the system from the power.
2 Notice Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the user’s authority to operate the equipment. Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the user’s authority to operate the equipment. Hereby, WOOX Innovation declares that this product is compliance with the essential requirements and other relevant provisions of Directive 1999/5/ EC.
The making of unauthorized copies of copyprotected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes. Note •• The type plate is located on the back of the apparatus.
3 Your Micro System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
Overview of the main unit ab c d ef g hj i klm on a c • • Turn the system on. Switch to standby mode. b SOURCE • Select a source: CD, USB, FM, DAB+, FM, BLUETOOTH, or MP3 LINK. 6 EN • • • • / Skip to the previous or next track. Search within a track or disc. Tune to radio stations. Adjust time. d OK/ • Start or pause play.
• • Confirm a selection. Switch between mono and stereo broadcast. e MENU/ • Access FM/DAB+ menu. • Stop play or erase a program. f VOLUME + / • Adjust volume. g • Overview of the remote control a b Open or close the disc compartment. h Power indicator • Light up when the micro system in in ECO standby mode. i Display panel • Show play information. r c q p d j Disc compartment k MP3-LINK • Connect an external audio device. l m • Connect a USB storage device. • Headphone socket.
• • Tune to radio stations. Adjust time. e VOL +/• Adjust volume. f REPEAT/SHUFFLE • Play a track or all tracks repeatedly. • Play tracks in current album repeatedly. • Play tracks randomly. g MUTE • Mute or resume sound. h SOUND • Select a preset sound setting. i CLOCK/SCAN • Set time. • Scan/store DAB+ radio stations automatically. j SLEEP/TIMER • Set sleep or alarm timer. k PROG • Program tracks. • Program radio stations. l RDS/DISPLAY • Show time and play information.
4 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Connect power Always follow the instructions in this chapter in sequence. Caution •• Risk of product damage! Make sure that the power Placement You can place the system on a flat surface or mount it on a wall. supply voltage corresponds to the voltage printed on the back of the system.
3 4 5 »» [SET CLOCK] (set clock) scrolls on the display, and then 12 or 24 hour format blinks. Press / repeatedly to select the hour format. Press CLOCK/SCAN to confirm. Repeat steps 3-4 to set the hour and minute respectively. Note •• If the system is idle for 10 seconds, it exits clock setting mode automatically. Turn on Press . »» The system switches to the last selected source. Tip •• To select another source, press SOURCE repeatedly or the source selection buttons on the remote control.
5 Play Play disc 1 2 3 4 Press CD/MP3-LINK repeatedly to to select CD source. Press to open the disc compartment. 2 Insert a disc with the printed side facing up. Press to close the disc compartment. »» Playback starts automatically after a few seconds. if not, press . Play from a USB storage device Press BT/USB repeatedly to select the USB source. »» Play starts automatically. If not, press .
1 2 3 4 Press SOURCE repeatedly to select the Bluetooth source. »» [BLUETOOTH] (BLUETOOTH) is displayed. / On your device, enable Bluetooth and search for Bluetooth devices that can be paired (refer to the user manual of the device). Select 'Philips BTB2090 on your Bluetooth enabled device and if necessary input '0000' as the paring password. »» After successful pairing and connection, [BT CONNECTED] (BT connected) is displayed and the speaker beeps twice. Play audio on the connected device.
Program tracks You can program a maximum of 20 tracks. 1 2 3 4 5 6 In CD or USB mode, press playback. to stop Press PROG to activate the programming mode. For MP3/WMA tracks, press / repeatedly to select an album. Press / repeatedly to select a track, then press PROG to confirm. Repeat steps 3-4 to program more tracks. To play the programmed tracks, press »» During play, [PROG] (program) is displayed. • To erase the program, press . twice.
6 Listen to DAB+ radio Store DAB+ radio stations automatically Tip Digital Audio Broadcasting (DAB+) is a way of broadcasting radio digitally through a network of transmitters. It provides you with more choice, better sound quality and more information. For first-time use 1 2 Press DAB/FM repeatedly to select DAB+ radio. »» [FULL SCAN] (full scan) is displayed. Press OK to start full scan. »» The system stores all DAB+ radio stations automatically, and then broadcasts the first available station.
Use DAB+ menu 1 2 3 4 In DAB+ mode, press MENU// DAB+ menu. Show DAB+ information to access Press / to scroll through the menu options: • [STATION LIST] (station list): Tune to a DAB+ radio station from a list of available DAB+ stations, or scan DAB+ stations if no station is stored in the list. • [FULL SCAN] (full scan): Scan and store all available DAB+ radio stations. • [MANUAL TUNE] (manual tune): Tune to a specific channel/frequency manually.
7 Listen to FM radio Tune to FM radio stations 1 2 Press DAB/FM repeatedly to select FM tuner mode. Press and hold or for 3 seconds. »» The system tunes to an FM station with strong reception automatically. 3 Repeat step 2 to tune to more stations. To tune to a station with weak signal: Press or repeatedly until you find good reception. Program FM radio stations automatically Program FM radio stations manually 1 2 3 4 5 In tuner mode, tune to an FM radio station. Press PROG to activate programming mode.
Select stereo/mono broadcast Note •• Stereo broadcast is the default setting for tuner mode. •• For stations with weak signals: to improve the reception, change to monaural sound. In FM tuner mode, press OK to switch between mono and stereo broadcast. Use FM menu 1 2 3 4 In FM mode, press MENU to access FM menu. Press / repeatedly to scroll the menu options: • [SCAN SETTING] (scan setting) • [AUDIO SETTING] (audio setting) • [SYSTEM] (see 'Other features - Use system menu') Press OK to select an option.
8 Other features Note •• Power supply must not be interrupted during the upgrade. •• The firmware upgrade can only be available through the mini-USB port. Use system menu 1 2 In FM/DAB+ mode, when the [System] (system) menu is displayed, press / repeatedly to select an option. Press OK to confirm the selection. [Time] [Factory Reset] [Software Upgrade] [Auto update] [Yes] [No] [Yes] [No] [SW version] Register your product 1 2 3 Reset the system to factory default status. Cancel.
Set the alarm timer Set the sleep timer Note Note •• Make sure that you have set the clock correctly. 1 2 3 4 5 6 In standby mode, press and hold SLEEP/ TIMER. »» [TIMER SOURCE] (Timer Source) is displayed. Press SOURCE repeatedly or the source selection buttons on the remote control to select an alarm source: FM, CD, USB, DAB. Press SLEEP/TIMER to confirm. »» The hour digits blink. Press or to set the hour. Press SLEEP/TIMER to confirm. »» The minute digits blink.
Listen through the headphone Plug a headphone into the system.
9 Product information Note •• Product information is subject to change without prior notice. Tuner (FM) FM: Tuning Range Tuning Grid Sensitivity - Mono, 26dB S/N Ratio - Stereo, 46dB S/N Ratio Total Harmonic Distortion Signal to Noise Ratio 87.5 - 108 MHz 50 KHz <22 dBf <51.5 dBf <3% >55 dBA DAB: Specifications Tuning Range Amplifier Rated Output Power Frequency Response Signal to Noise Ratio Total Harmonic Distortion MP3 Link Input 2 x 10 W RMS 125 -16000 Hz, ±3 dB > 62 dBA <1% 650 mV RMS 174.
USB playability information Compatible USB devices: • USB flash memory (USB1.1) • USB flash players (USB1.1) • memory cards (requires an additional card reader to work with this unit) Supported formats: • USB or memory file format: FAT12, FAT16, FAT32 (sector size: 512 bytes) • MP3 bit rate (data rate): 32-320 Kbps and variable bit rate • WMA v9 or earlier • Directory nesting up to a maximum of 8 levels • Number of albums/ folders: maximum 99 • Number of tracks/titles: maximum 999 • ID3 tag v2.
10 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
Specifications are subject to change without notice. 2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. BTB2090_12_UM_V1.