Always there to help you Register your product and get support at www.philips.
Contents 1 Important Safety 2 Your micro system Introduction What's in the box Overview of the main unit Overview of the remote control 3 Get started Connect FM antenna Connect power Prepare the remote control Set clock Turn on 2 2 3 3 3 4 5 7 7 7 7 8 8 4 Play 9 9 9 9 10 10 10 5 Listen to the radio 12 12 13 6 Adjust sound 15 15 15 15 7 Other features 16 16 16 16 17 Play from disc Play from USB Control play Skip to a track Program tracks Play from Bluetooth-enabled devices Listen to DAB radio
1 Important Safety • • • • • • • Make sure that there is enough free space around the product for ventilation. Only use attachments or accessories specified by the manufacturer. Battery usage CAUTION – To prevent battery leakage which may result in bodily injury, property damage, or damage to the product: • Install the battery correctly, + and - as marked on the product. • Remove the battery when the product is not used for a long time.
2 Your micro system Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
Overview of the main unit a b c d e f g h i j k l m n o a f Disc compartment • • Turn the unit on or off. Switch to standby mode or Eco standby mode. b SOURCE • Press to select a source: DISC, USB, DAB, TUNER, BT, AUDIO IN. c d e 4 g h • Open/close the disc compartment. • • • • / Skip to the previous/next track. Search within a track/disc/USB. Tune to a radio station. Adjust time. /PAIRING Start, pause, or resume play. In Bluetooth mode, press and hold for 3 seconds to enter pairing mode.
l MICRO USB • For DAB upgrade only. m • • • Headphone socket. n AUDIO IN • Audio input socket(3.5mm) for an external audio device. c USB/AUDIO IN • Press repeatedly to select the USB or AUDIO IN source. o DC IN 12V 2.5A • Power socket. d Overview of the remote control a r b q c d p o f h i m j l k a b • • • Turn the unit on or off. Switch to standby mode or Eco power standby mode. /PAIRING Press to select the BT (Bluetooth) source. • • • • / Skip to the previous/next track.
m INFO • Display the current status or disc information. • For selected FM radio stations, display RDS information (if available). n ALBUM/PRESET / • Select a preset radio station. • Skip to the previous/next album. o MODE • Select repeat or shuffle play mode. • Adjust LCD brightness p • Start, pause, or resume play. q DAB/FM • Press repeatedly to select the DAB or FM source. r CD • Select the DISC source.
3 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous laser exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
2 Insert the supplied AAA battery with correct polarity (+/-) as indicated. 3 Close the battery compartment. Note •• If no button is pressed in 10 seconds, the system exits clock setting mode automatically. Tip •• You can press CLOCK to view clock information in power-on mode. Set clock Turn on 1 In standby mode, press and hold CLOCK on the remote control for 3 seconds. »» The [24H] or [12H] hour format is displayed. • 2 Press / to select the [24H] or [12H] hour format.
4 Play »» Play starts automatically. If not, press . Play from disc Note •• Make sure that the disc contains playable audio content. 1 2 Press CD to select the DISC source. Insert a disc into the disc compartment with the printed side facing you. »» Play starts automatically. If not, press . USB Control play ALBUM/ PRESET / / /MENU MODE Play from USB Note •• Make sure that the USB device contains playable audio content (see 'Product information' on page 18).
To enjoy music through the speaker wirelessly, you need to pair your Bluetooth enabled device with the unit. Skip to a track For CD: Press / to select another track. For MP3 disc and USB: 1 Press ALBUM/PRESET album or a folder. 2 Press / / to select an to select a track or a file. Program tracks You can program a maximum of 20 tracks. 1 Stop play, and then press PROG to activate programming mode. 2 For MP3 tracks, press ALBUM/PRESET to select an album.
3 Select 'Philips BTB2465' on your Bluetooth enabled device and if necessary input '0000' as the pairing password. »» After successful pairing and connection, the Bluetooth indicator turns solid blue, and the unit beeps twice. »» 'BT' is displayed. 4 Play music on the connected device. »» Music streams from your Bluetooth enabled device to this product. • If you fail to search for 'Philips BTB2465' or cannot pair with this product, press and hold /PAIRING for three seconds to enter pairing mode.
5 Listen to the radio Tip •• Position the antenna as far as possible from TV or other radiation sources. •• Make sure that you have connected the supplied FM antenna. •• For optimal reception, fully extend and adjust the position of the antenna. Listen to DAB radio Digital Audio Broadcasting (DAB) is a way of broadcasting radio digitally through a network of transmitters. It provides you with more choice, better sound quality, and more information.
5 Repeat the above steps to store more DAB stations. 4 6 Press ALBUM/PRESET / to select a manually stored station, and then press OK to confirm. [SYSTEM] (system) • [RESET] (reset): reset all settings to factory default. • [UPGRADE] (upgrade): upgrade software if available. • [SW VER] (software version): show the software version of this unit. Note •• To remove a pre-stored DAB radio station, store another station in its place.
3 Press OK to select an option, and then press /MENU to exit the menu. 4 In FM tuner mode, press and hold CLOCK/SCAN. »» The stations scanned are based on the selection in step 2. »» The unit broadcasts the first scanned FM radio stations. Store FM radio stations manually 1 2 Tune to an FM radio station. Press PROG to activate programming mode. »» [PROG] (program) blinks. 3 Press ALBUM/PRESET / to select a radio frequency. 4 Press PROG again to confirm.
6 Adjust sound The following operations are applicable to all supported media. Select a preset sound effect • Press SOUND repeatedly to select a preset sound effect. • Balanced(Balanced), Warm(Warm), Bright(Bright), Clear(Clear), and Powerful(Powerful). Adjust volume level • • On the remote control, press +/repeatedly. On the main unit, press VOL+/VOLrepeatedly. Mute sound • Press to mute or restore the sound.
7 Other features • Adjust LCD brightness 1 2 Press and hold MODE for over 3 seconds, the current DIM setting is displayed. »» By default, it’s DIM 2 (the weakest brightness). Press SLEEP/TIMER repeatedly to view the alarm information and activate or deactivate the alarm. »» If the timer is activated, [TIMER](Timer) is displayed. »» If the timer is deactivated, [TIMER OFF] (timer off) is displayed and [TIMER](Timer) disappears.
1 Press USB/AUDIO IN repeatedly to select the AUDIO IN source. 2 Connect an audio cable (not supplied) between: • the AUDIO IN socket (3.5 mm) on the unit; • and the headphone socket on an external device. 3 Start to play music on the connected device (see the device user manual). Listen through a headphone • Plug a headphone (not supplied) into the socket.
8 Product information USB USB Direct Version 2.0 full speed Tuner (FM) Note Tuning Range •• Product information is subject to change without prior notice.
USB playability information RDS program types Compatible USB devices: • USB flash memory (USB2.0 or USB1.1) • USB flash players (USB2.0 or USB1.
9 Troubleshooting Warning •• Never remove the casing of this unit. To keep the warranty valid, never try to repair the unit yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
The paired mobile device connects and disconnects constantly. •• The Bluetooth reception is poor. Move the device closer to this unit or remove any obstacle between them. •• Some mobile phones may connect and disconnect constantly when you make or end calls. This does not indicate any malfunction of this unit. •• For some devices, the Bluetooth connection may be deactivated automatically as a power-saving feature. This does not indicate any malfunction of this unit.
10 Notice Any changes or modifications made to this device that are not expressly approved by Gibson Innovations may void the user’s authority to operate the equipment. Inform yourself about the local separate collection system for electrical and electronic products and batteries. Follow local rules and never dispose of the product and batteries with normal household waste. Correct disposal of old products and batteries helps prevent negative consequences for the environment and human health.
EN 23
This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. BTB2465_05_UM_V1.