operation manual

20 EN
7 Other features
Set the alarm timer
This unit can be used as an alarm clock. You can
select CD, FM, or USB as alarm source.
Note
•
Make sure that you have set the clock correctly.
1 In standby mode, press and hold TIME for
more than two seconds.
» The hour digits appear and begin to
blink.
2 Press / (or +/-)repeatedlytosethour,
and then press TIME.
» The minute digits appear and begin to
blink.
3 Repeat step 2 to set minute, select a
source(disc,USB,ortuner),andadjust
volume.
Note
•
If no button is pressed in 90 seconds, the system exits
timer setting mode automatically.
To activate or deactivate the alarm timer:
• Press TIME repeatedly to activate or
deactivate the alarm.
» If the timer is activated,
is displayed.
Tip
•
If the disc/USB source is selected, but no disc is placed
or no USB connected, the system switches to the tuner
source automatically.
Set the sleep timer
• To set the sleep timer, in power-on mode,
press SLEEP repeatedly to select a set
periodoftime(inminutes).
» When the sleep timer is activated,
is displayed.
To deactivate sleep timer:
• Press SLEEP repeatedly until [SLP OFF]
(sleepoff)isdisplayed.
» When the sleep timer is deactivated,
disappears.
Listen to an external device
You can listen to an external device through this
unit(cablenotsupplied).
1 Make sure that the external audio device
is connected to this unit (see 'Connect an
externalaudiodevice'onpage9).
2 Press SOURCE repeatedly to select the
AUX source.
3 Start music play on the external device
(see the user manual of the external
device).