Always there to help you Register your product and get support at www.philips.
Contents 1 Important Safety 2 Your micro system Introduction What's in the box Overview of the main unit Overview of the remote control 2 2 3 3 3 4 5 3 Get started 6 6 7 7 7 7 7 4 Play 8 8 8 9 9 9 9 Connect speakers Connect power Demonstrate the features Prepare the remote control Set clock Turn on Play from disc Play from USB Control play Skip to a track Program tracks Play from Bluetooth-enabled devices 5 Listen to the radio 10 10 10 11 11 6 Other features 11 11 12 12 Tune to a radio station
1 Important • Safety • • This 'bolt of lightning' indicates uninsulated material within the device may cause an electrical shock. For the safety of everyone in your household, please do not remove the covering. The 'exclamation mark' calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
• Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Warning •• Never remove the casing of this device. •• Never lubricate any part of this device. •• Never place this device on other electrical equipment. •• Keep this device away from direct sunlight, naked 2 Your micro system Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.
• • Short user manual Safety and notice SOURCE VOLUME FM CD AUDIO IN PRESET/ALBUM AUDIO IN REPEAT VOL SHUFFLE MUTE DISPLAY SOUND CLOCK PROG TIMER SLEEP Always there to help you Register your product and get support at www.philips.com/welcome Question? Contact Philips SOURCE VOLUME AUDIO IN Overview of the main unit a b c d SOURCE VOLUME l k j i e f AUDIO IN h g a Bluetooth indicator • Show Bluetooth status. b 4 • • EN Turn the unit on or off.
e • Jack for a USB device. f AUDIO IN • Audio input jack (3.5mm) for an external audio device. Overview of the remote control a g Disc compartment h i j • Open/close the disc compartment. • Stop play or erase a program. • • • • / Skip to the previous/next track. Search within a track/disc/USB. Tune to a radio station. Adjust time. k VOLUME +/• Adjust volume. l • Start, pause, or resume play.
f VOL +/• Adjust volume. g MUTE • Mute or restore volume. h SOUND • Enrich sound effect with Digital Sound Control (DSC). i CLOCK • Set the clock. • View clock information. j SLEEP/TIMER • Set sleep timer. • Set alarm timer. k PROG • Program tracks. • Program radio stations. • Auto store FM radio stations. l DISPLAY • Adjust display brightness. m SHUFFLE • Play tracks randomly. n • Stop play or erase a program.
Connect power Caution •• Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. •• Risk of electric shock! When you unplug the AC power cord, always pull the plug from the socket. Never pull the cord. •• Before you connect the AC power cord, ensure that you have completed all other connections. To insert the remote control battery: 1 2 3 Open the battery compartment.
Switch to standby mode Press again to switch the unit to standby mode. »» The clock (if set) is displayed on the panel. Switch to ECO standby mode: Press and hold for more than two seconds. »» The display panel is dimmed. Note •• The unit switches to Eco Power Standby mode after 15 4 Play Play from disc 1 2 3 Press CD to select the CD source. Press Insert a disc with printed side facing upward. 4 Press to close the disc compartment. »» Play starts automatically. If not, press .
2 FM CD AUDIO IN PRESET/ALBUM 3 USB SOURCE VOLUME REPEAT VOL SHUFFLE MUTE DISPLAY SOUND CLOCK AUDIO IN PROG TIMER SLEEP 4 5 For MP3 tracks, press album. / / REPEAT SHUFFLE VOL +/MUTE SOUND DISPLAY Select a folder. Select an audio file. Pause or resume play. Stop play. Play a track or all tracks repeatedly. Play tracks randomly. Increase or decrease the volume. Mute or restore sound. Enrich sound effect with DSC: balanced, clear, powerful, warm, and bright. Adjust display brightness.
1 2 3 4 Press FM/ repeatedly to select the Bluetooth source. »» [BT] (Bluetooth) is displayed. »» The Bluetooth indicator flashes blue. On your device that supports Advanced Audio Distribution Profile (A2DP), enable Bluetooth and search for Bluetooth devices that can be paired (refer to the user manual of the device). Select 'PHILIPS BTM1180' on your Bluetooth enabled device and if necessary input '0000' as the paring password.
6 Other features Program radio stations manually 1 2 3 4 Set the alarm timer Tune to a radio station. Press PROG, and then press select a number from 1-20. / to Press PROG to confirm. »» The preset number and the frequency of the preset station are displayed. Repeat steps 2-3 to program more stations. This unit can be used as an alarm clock. You can select CD, FM, or USB as alarm source. Note •• Make sure that you have set the clock correctly.
Set the sleep timer To set the sleep timer, in turn on mode, press SLEEP/TIMER repeatedly to select a set period of time (in minutes). »» When sleep timer is activated, is displayed. Otherwise, disappears. 7 Product information Note •• Product information is subject to change without prior notice. Listen to an external device You can listen to an external device through this unit with an MP3 link cable. 1 Press USB/AUDIO IN repeatedly to select AUDIO IN source.
Tuner Sensitivity - Mono, 26dB S/N Ratio - Stereo, 46dB S/N Ratio Search Selectivity Total Harmonic Distortion Signal to Noise Ratio <22 dBf <45 dBf <30 dBf <3% >45 dBA USB USB Direct Version USB 5 V Power 2.0 full speed ≤500 mA Disc Laser Type Disc Diameter Support Disc Audio DAC Total Harmonic Distortion Frequency Response S/N Ratio Semiconductor 12 cm/8 cm CD-DA, CD-R, CD-RW, MP3-CD 24 Bits/44.
8 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
The paired mobile device connects and disconnects constantly. •• The Bluetooth reception is poor. Move the device closer to this unit or remove any obstacle between them. •• Some mobile phones may connect and disconnect constantly when you make or end calls. This does not indicate any malfunction of this unit. •• For some devices, the Bluetooth connection may be deactivated automatically as a power-saving feature. This does not indicate any malfunction of this unit.
Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste.Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health. Environmental information All unnecessary packaging has been omitted.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. BTM1180_12_UM_V2.