Always there to help you Register your product and get support at www.philips.
Contents 1 Important 3 2 Your Micro System 4 Introduction What's in the box Overview of the main unit Overview of the remote control 3 Get started Placement Prepare FM antenna Prepare the remote control Connect power Turn on Set clock Store FM radio stations automatically 4 4 5 6 5 Listen to FM radio 13 6 Other features 14 Set the alarm timer Set the sleep timer Play from an external device Listen through the headphone 8 Troubleshooting 18 9 Notice 20 16 16 17 17 About Bluetooth device 18
1 Important Warning •• Never remove the casing of this micro system. •• Never lubricate any part of this system. •• Never place this system on other electrical equipment. •• Never look into the laser beam inside this system. •• Keep this system away from direct sunlight, naked flames or heat. •• Make sure that you always have easy access to the power cord, plug or adaptor to disconnect the system from the power.
2 Your Micro System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
Overview of the main unit ab c de f i g h j kl m n a 5 • • EN Turn the system on. Switch to standby mode. b SOURCE • Select a source: CD, Bluetooth, FM tuner, USB, or MP3 LINK.
c d e • • • • / Skip to the previous or next track. Search within a track or disc. Tune to FM radio stations. Adjust time. • • • Confirm a selection. Select mono or stereo broadcast. Start or pause play. • • CD s r FM PRESET/ALBUM q d Open or close the disk tray. i Display panel • Show play information. j MP3 LINK • Connect an external audio device. l b Stop play or erase a program. h Disc tray k a c f VOLUME + / • Adjust volume.
d • • • • / Skip to the previous or next track. Search within a track or disc. Tune to radio stations. Adjust time. e USB/MP3 LINK • Select USB or MP3 link source. f RDS/DISPLAY • For FM radio stations with RDS signals: display RDS information. • Show time and play information. g OK • Confirm a selection. h VOL +/• Adjust volume. i Numeric Keypad 0 - 9 • Select a track from a disc or USB device directly. • Select a preset radio station. j PROG/CLOCK SET • Program tracks. • Program radio stations.
3 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Prepare the remote control 1 2 3 Open the battery compartment. Insert 2 AAA batteries with correct polarity (+/-) as indicated. Close the battery compartment. Always follow the instructions in this chapter in sequence. a Placement b You can place the system on a flat surface or mount it on a wall.
Set clock 1 2 Turn on Press . »» The system switches to the last selected source. 3 4 5 6 Tip •• To select another source, press SOURCE repeatedly or the source selection buttons on the remote control. In standby mode, press and hold CLOCK SET on the remote control for two seconds. »» [SET CLOCK] (set clock) scrolls on the display, then the 12/24 hour format blinks. Press / format. repeatedly to select an hour Press CLOCK SET to confirm. »» The hour digits blink. Repeat steps 2-3 to set the hour.
2 Press and hold for 3 seconds to start full scan. »» The system automatically stores FM radio stations with sufficient signal strength. 4 Play »» The first preset station is broadcast automatically. Play disc Tip •• To exit storing mode, press or . 1 2 Press to open the disc tray. Insert a disc with the printed side facing up. 050 3 4 Press to close the disc tray. Press CD on the remote control to select the disc source.
1 Insert the USB storage device into the socket. 4 Play audio on your device. »» Audio streams from your device to this micro system. Tip •• The system can memorize up to 5 previously connected Bluetooth devices. To disconnect the Bluetooth-enabled device: • Deactivate Bluetooth on your device; or • Move the device beyond the communication range. 2 Press USB on the remote control to select the USB source. »» Play starts automatically. If not, press .
REPEAT/SHUFFLE [ ]: Play the current track repeatedly. [ ] (for MP3/ WMA only): play all tracks in this album repeatedly. [ ]: play all tracks repeatedly. [ ]: play all tracks randomly. To return to normal play, press REPEAT/SHUFFLE repeatedly until the repeat or shuffle icons disappear. DBB DSC Turn dynamic bass enhancement on or off.
5 Listen to FM radio Tune to FM radio stations Note •• Position the antenna as far as possible from TV, VCR, or other radiation source. •• Make sure that you have connected and fully extended the supplied FM antenna. 1 2 3 Program FM radio stations manually 1 2 3 4 5 Press PROG to activate programming mode. »» [PROG] (program) blinks. Press or repeatedly to select a channel number. Press PROG again to confirm. Repeat steps 1-4 to store other FM stations. Note Press FM to select FM tuner mode.
Select stereo/mono broadcast 6 Other features Note •• Stereo broadcast is the default setting for tuner mode. •• For stations with weak signals: to improve the reception, change to monaural sound. In FM tuner mode, press to switch between mono and stereo broadcast. Set the alarm timer This system can be used as an alarm timer. You can select CD, FM tuner, or USB as alarm source. Note •• Make sure that you have set the clock correctly.
Set the sleep timer Note •• Make sure that you have set the clock correctly. When the system is turned on, press SLEEP repeatedly to select the sleep timer period (in minutes). »» If the sleep timer is activated, is displayed. To deactivate the sleep timer: Press SLEEP repeatedly until [OFF] (off) is displayed. Play from an external device You can also listen to an external audio device through this system. 1 Connect the audio cable (not supplied) to: • the MP3 LINK socket (3.5mm) on the system.
7 Product information Note •• Product information is subject to change without prior notice. Bluetooth Standard Bluetooth Standard Version 2.1+EDR Frequency Band 2.402~2.480 GHzISM Band Range 10m (free space) General information AC Power Specifications Amplifier Maximum Output Power Frequency Response Signal to Noise Ratio Total Harmonic Distortion MP3 Link Input 15 W 63 -14000 Hz, -3 dB > 57 dBA <1% 650 mV RMS Operation Power Consumption 15 W Standby Power Consumption < 0.
Unsupported formats: • Empty albums: an empty album is an album that does not contain MP3/WMA files, and is not be shown in the display. • Unsupported file formats are skipped. For example, Word documents (.doc) or MP3 files with extension .dlf are ignored and not played. • AAC, WAV, PCM audio files • DRM protected WMA files (.wav, .m4a, .m4p, .mp4, .
8 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
Cannot connect with the device. •• The Bluetooth function of the device is not enabled. Refer to the user manual of the device for how to enable the function. •• The system is already connected with another Bluetooth-enabled device. Disconnect that device and then try again. •• You have cleared the pairing history in the micro system.
9 Notice Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the user’s authority to operate the equipment. This product complies with the radio interference requirements of the European Community. A copy of the EC declaration of Conformity is available in the Portable Document Format (PDF) version of the user manual at www.philips.com/ support. cannot be disposed with normal household waste.
Specifications are subject to change without notice. 2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. BTM2056_12_UM_V2.