Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 2 2 Your micro system 4 4 4 5 6 3 Get started 7 7 7 7 7 8 8 Safety Introduction What's in the box Overview of the main unit Overview of the remote control Connect speakers Connect power Demonstrate the features Prepare the remote control Set clock Turn on 4 Play 9 9 9 10 10 10 10 5 Listen to the radio 12 12 12 12 12 6 Other features 13 13 13 13 7 Product information 14 14 15 15 Play from disc Play from USB Control play Skip to a track Program tracks Play from Bluetoot
1 Important • • Safety This 'bolt of lightning' indicates uninsulated material within the device may cause an electrical shock. For the safety of everyone in your household, please do not remove the covering. The 'exclamation mark' calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
• Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Warning •• Never remove the casing of this device. •• Never lubricate any part of this device. •• Never place this device on other electrical equipment. •• Keep this device away from direct sunlight, naked flames or heat. •• Never look into the laser beam inside this device.
2 Your micro system Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
Overview of the main unit h a b c g d f e a • • Turn on the product. Switch to standby mode or Eco power standby mode. b Display panel • Show current status. c • • Connect USB storage devices. Charge your device. d AUDIO IN • Connect external audio devices. h SOURCE • Select a source: DISC, USB, TUNER, AUDIO IN, BT (Bluetooth). • Start, pause, or resume play. • Stop play or erase a program. / Skip to previous/next track. Search within a track/disc/USB. Tune to a radio station. Adjust time.
f VOL +/• Adjust volume. Overview of the remote control g MUTE • Mute or restore volume. a b c FM CD r h SOUND • Enrich sound effect with Digital Sound Control (DSC). q i CLOCK • Set the clock. • View clock information. AUDIO IN PRESET/ALBUM d p e REPEAT f VOL g SHUFFLE MUTE DISPLAY SOUND CLOCK PROG TIMER h i SLEEP o n m l k j j SLEEP/TIMER • Set sleep timer. • Set alarm timer. k PROG • Program tracks. • Program radio stations. • Auto store FM radio stations.
3 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
To insert the remote control battery: 1 2 3 Open the battery compartment. Insert the supplied AAA battery with correct polarity (+/-) as indicated. Close the battery compartment. Turn on Press . »» The unit switches to the last selected source. Switch to standby mode Press again to switch the unit to standby mode. »» The clock (if set) is displayed on the panel. Set clock 1 2 3 4 In standby mode, press and hold CLOCK on the remote control for more than two seconds.
2 4 Play Insert a USB device into the socket. »» Play starts automatically. If not, press . Play from disc 1 2 3 4 Press CD to select the CD source. Press to open the disc compartment. Insert a disc with printed side facing upward. Press to close the disc compartment. »» Play starts automatically. If not, press .
Program tracks You can program a maximum of 20 tracks. 1 2 3 4 5 Press PROG to activate the program mode. For MP3 tracks, press album. / / REPEAT SHUFFLE VOL +/MUTE SOUND DISPLAY Select a folder. Select an audio file. Pause or resume play. Stop play. Play a track or all tracks repeatedly. Play tracks randomly. Increase or decrease the volume. Mute or restore sound. Enrich sound effect with DSC: balanced, clear, powerful, warm, and bright. Adjust display brightness.
To disconnect the Bluetooth-enabled device: • Deactivate Bluetooth on your device; or • Move the device beyond the communication range; or • Press and hold for 3 seconds. »» The current Bluetooth connection is disconnected. To clear Bluetooth pairing history: • Press and hold for 8 seconds. »» The current Bluetooth is cleared. FM CD AUDIO IN PRESET/ALBUM BTM2310 1 2 3 4 PIN 0000 Press FM/ repeatedly to select the Bluetooth source. »» [BT] (Bluetooth) is displayed.
5 Listen to the radio Tune to a radio station Tip Program radio stations manually 1 2 3 •• Position the antenna as far as possible from TV, VCR, or other radiation source. •• For optimal reception, fully extend and adjust the position of the antenna. 1 2 3 Press FM/ repeatedly to select the FM source. Press and hold / for more than two seconds. »» The radio tunes to a station with strong reception automatically. Repeat step 2 to tune to more stations.
6 Other features Set the alarm timer This unit can be used as an alarm clock. You can select CD, FM, or USB as alarm source. Note •• Make sure that you have set the clock correctly. 1 2 3 4 In standby mode, press and hold SLEEP/ TIMER for more than two seconds. »» The hour digits are displayed and begin to blink. Press / Set the sleep timer To set the sleep timer, in turn on mode, press SLEEP/TIMER repeatedly to select a set period of time (in minutes). »» When sleep timer is activated, is displayed.
7 Product information Tuner Sensitivity - Mono, 26dB S/N Ratio - Stereo, 46dB S/N Ratio Search Selectivity Total Harmonic Distortion Signal to Noise Ratio Note <22 dB u <45 dB u <30 dB u <3% >45 dBA •• Product information is subject to change without prior notice. USB USB Direct Version USB 5 V Power Specifications 2.
USB playability information Compatible USB devices: • USB flash memory (USB2.0 or USB1.1) • USB flash players (USB2.0 or USB1.
8 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
•• This unit is already connected with another Bluetooth-enabled device. Disconnect that device and then try again. The paired mobile device connects and disconnects constantly. •• The Bluetooth reception is poor. Move the device closer to this unit or remove any obstacle between them. •• Some mobile phones may connect and disconnect constantly when you make or end calls. This does not indicate any malfunction of this unit.
9 Notice Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the user’s authority to operate the equipment. Hereby, WOOX Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can find the Declaration of Conformity on www.philips.com/ support.
Note •• The type plate is located on the back of the device.
2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. BTM2310_12_UM_V3.