Always there to help you Register your product and get support at www.philips.
Contents 1 Important Safety Notice 2 Your Micro Music System Introduction What's in the box Overview of the main unit Overview of the remote control 3 Get started Connect speakers Connect power Prepare the remote control Demonstrate the features Set clock Power on 2 2 2 4 4 4 5 6 8 8 8 8 9 9 9 4 Play 10 10 10 10 10 11 11 5 Listen to the radio 13 13 13 13 13 6 Adjust sound 14 14 14 14 Play from disc Play from USB Control play Skip tracks Program tracks Play from Bluetooth-enabled devices Tune to
1 Important • Safety Notice Read and understand all instructions before you use this micro music system. If damage is caused by failure to follow the instructions, the warranty does not apply. Any changes or modifications made to this device that are not expressly approved by Gibson Innovations may void the user’s authority to operate the equipment. Warning •• Never remove the casing of this apparatus. •• Never lubricate any part of this apparatus.
trademarks and trade names are those of their respective owners. This symbol means that the product contains batteries covered by European Directive 2013/56/EU which cannot be disposed of with normal household waste. Inform yourself about the local separate collection system for electrical and electronic products and batteries. Follow local rules and never dispose of the product and batteries with normal household waste.
2 Your Micro Music System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this unit, you can: • enjoy audio from discs, USB devices, Bluetooth devices, and other external devices; • listen to radio stations.
Overview of the main unit h a b c g d f e a • • Turn on the product. Switch to standby mode or Eco power standby mode. • • Start, pause, or resume play. In Bluetooth mode, press and hold for three seconds until you hear a beep sound to disconnect the currently connected device and enter pairing mode. • Stop play or erase a program. / Skip to previous/next track. Search within a track/disc/USB. Tune to a radio station. Adjust time. b Display panel • Show current status.
Overview of the remote control d a e b r c q p d o n e m • Play tracks randomly. f ALBUM/PRESET / • Select a preset radio station. • Skip to previous/next album. g DISPLAY • Adjust display brightness. • During playback, display the play information. h SLEEP/TIMER • Set sleep timer. • Set alarm timer. i CLOCK • Set the clock. • View clock information. k j PROG • Program tracks. • Program radio stations. • Auto store FM radio stations. j h / Skip to the previous/next track.
q FM/AUDIO IN • Select FM source. • Select AUDIO IN source. r • Select Bluetooth source.
3 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous laser exposure or other unsafe operation. Connect power Caution •• Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. •• Before you connect the AC power cord, ensure that you have completed all other connections. Always follow the instructions in this chapter in sequence.
Demonstrate the features In standby mode, press to demonstrate features of this device. »» The features are displayed one by one across the display panel. • To turn off the demonstration, press again. Set clock 1 2 3 4 In standby mode, press and hold CLOCK on the remote control for more than two seconds. »» [24H] or [12H] hour format is displayed. Press / to select [24H] or [12H] hour format. press CLOCK to confirm. »» The hour digits are displayed and begin to blink.
4 Play Play from disc 1 2 3 4 Press CD to select CD source. Press to open the disc compartment. Insert a disc with the label side up. Press to close the disc compartment. »» Play starts automatically. If not, press . Control play / / VOL +/- Play from USB Note SOUND DISPLAY Start, pause, or resume play. Stop play. Select an album or a folder. Press to skip to the previous or next track. Press and hold to search backward/forward within a track. Play a track or all tracks repeatedly.
Program tracks This function allows you to program 20 tracks in the desired sequence. 1 2 3 4 5 In stop mode, press PROG to activate the program mode. »» [PROG] (program) and [001 PR 01] are displayed. For MP3 tracks, press album. / to select an Press / to select a track, and then press PROG to confirm. Repeat steps 2 to 3 to program more tracks. Philips BTM2312 Press to play the programmed tracks. »» During play, [PROG] (program) is displayed. To erase the program Press twice.
Tip •• The product can memorize up to 8 previously connected Bluetooth devices. To disconnect the Bluetooth-enabled device: • Deactivate Bluetooth on your device; or • Move the device beyond the communication range. Enter Bluetooth pairing mode Press and hold /PAIRING for three seconds until your hear a beep sound to disconnect the currently connected device and enter Bluetooth pairing mode.
5 Listen to the radio Tune to a radio station Tip •• Position the antenna as far as possible from TV, VCR, or Program radio stations manually 1 2 3 other radiation source. •• For optimal reception, fully extend and adjust the position of the antenna. 1 2 3 Press FM/AUDIO IN repeatedly to select FM source. Press and hold / for more than two seconds. »» The radio tunes to a station with strong reception automatically. Repeat step 2 to tune to more stations.
6 Adjust sound The following operations are applicable to all supported media. Select a preset sound effect • Press SOUND repeatedly to select a preset sound effect. • DSC1: Powerful • DSC2: Clear • DSC3: Balanced • DSC4: Warm • DSC5: Bright Adjust volume level • • On the remote control, press VOL +/repeatedly. On the main unit, rotate the volume knob. Mute sound • Press 14 EN to mute or unmute the sound.
7 Other features Set the alarm timer Tip •• Alarm timer is not available in AUDIO IN mode. Note •• If CD/USB source is selected, but no disc is placed or no USB device is connected, the TUNER source is selected automatically. This product can be used as an alarm clock. You can select the disc, FM, or .mp3 files on a USB storage device as alarm source. Note •• Make sure that you have set the clock correctly. •• If the selected alarm source is unavailable, this product switches to FM mode automatically.
3 Start to play the device (see the device user manual). AUDIO IN Charge your devices With this micro music system, you can charge your external devices, such as your cell phone, MP3 player or other mobile devices. 1 2 Use a USB cable to connect the USB socket of product with the USB socket of your devices. Connect the product to power. »» Once the device is recognized, the charging starts. Note •• Philips does not guarantee the compatibility of this product with all devices.
8 Product information Note notice.
USB playability information Compatible USB devices: • USB flash memory (USB2.0 or USB1.1) • USB flash players (USB2.0 or USB1.
9 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
The paired mobile device connects and disconnects constantly. •• The Bluetooth reception is poor. Move the device closer to this unit or remove any obstacle between them. •• Some mobile phones may connect and disconnect constantly when you make or end calls. This does not indicate any malfunction of this unit. •• For some devices, the Bluetooth connection may be deactivated automatically as a power-saving feature. This does not indicate any malfunction of this unit.
Copyright © 2015 Gibson Innovations Limited. Revised Edition © 2017 This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. BTM2312/BTM2325_12_UM_V2.