operation manual
15EN
7 Other features
Set the alarm timer
This product can be used as an alarm clock. You
canselectthedisc,FM,or.mp3lesonaUSB
storage device as alarm source.
Note
•
Make sure that you have set the clock correctly.
• If the selected alarm source is unavailable, this product
switches to FM mode automatically.
1 In normal standby mode, press and hold
SLEEP/TIMER for two seconds.
» The hour digits blink.
»
is displayed.
2 Press / repeatedly to set the hour,
and then press SLEEP/TIMERtoconrm.
» The minute digits blink.
3 Press / to set the minute, and then
press SLEEP/TIMERtoconrm.
» The last selected alarm source blinks.
4 Press / to select an alarm source
(DISC,USBorTuner),andthenpress
SLEEP/TIMERtoconrm.
» VOL_XX (XX indicates the volume
levelofalarm)blinks.
5 Press / to set the alarm volume,
and then press SLEEP/TIMERtoconrm.
Activate/deactivate alarm timer
In standby mode, press SLEEP/TIMER
repeatedly to activate or deactivate timer.
» If timer is activated,
is displayed.
Tip
•
Alarm timer is not available in AUDIO IN mode.
Note
•
If CD/USB source is selected, but no disc is placed
or no USB device is connected, the TUNER source is
selected automatically.
Set the sleep timer
This music system can switch to standby
automatically after a set period of time.
• When the music system is turned on, press
SLEEP/TIMER repeatedly to select a set
periodoftime(inminutes).
» When sleep timer is activated,
is
displayed.
To deactivate sleep timer
• Press SLEEP/TIMER repeatedly until [OFF]
(sleepoff)isdisplayed.
» When sleep timer is deactivated,
disappears.
Listen to an external device
You can listen to an external device through this
unit with an MP3 link cable.
1 ConnectanMP3linkcable(notsupplied)
between:
• AUDIO INjack(3.5mm)onthe
product,
• and the headphone jack on an external
device.
2 Press FM/AUDIO IN repeatedly to select
AUDIO IN source.