Always there to help you Register your product and get support at www.philips.
Contents 1 Important Safety Notice 2 2 3 2 Your Bluetooth Micro music system 5 Introduction What's in the box Overview of the main unit Overview of the remote control 5 5 6 7 3 Before use 9 Connect the FM antenna 9 Connect power 9 Install/replace the remote control batteries 9 4 Get started 11 11 11 11 5 Play 12 12 12 12 13 6 Listen to FM radio 15 15 15 15 15 16 7 Other features 17 17 17 17 18 Know the LED indicator status Set clock Turn on Play a disc Play from a USB storage device Control p
1 Important Safety Information for Europe: Know these safety symbols The 'exclamation mark' calls attention to features for which you should carefully read the supplied literature to prevent operating and maintenance problems. The 'lightening bolt' symbol indicates uninsulated components within the product that can cause an electric shock.
Risk of overheating! Never install this apparatus in a confined space. Always leave a space of at least four inches around this apparatus for ventilation. Ensure curtains or other objects never cover the ventilation slots on this apparatus. • • • Be careful not to adjust the volume as your hearing adapts. Do not turn up the volume so high that you can't hear what's around you. You should use caution or temporarily discontinue use in potentially hazardous situations.
Care of the environment Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste.
2 Your Bluetooth Micro music system Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of this product. The model number and serial number are on the back of the main unit. Write the numbers here: Model No. __________________________ Serial No.
Overview of the main unit a kl b c mn j f hi de g o p a Display panel • Show the current status of the device. b VOL+/VOL• Increase or decrease the volume level. c d 6 • • • • EN / Skip to the previous or next track. Press and hold to search within a track. Tune to a radio stations. Press to eject the disc from the disc compartment. e NFC area • Touch with an NFC compatible device to set up Bluetooth connection automatically. f Disc compartment g AUDIO-IN • Connect to the 3.
i j k l • Connect a USB storage device. • Connect a headphone with a 3.5-mm connector. Overview of the remote control a • Stop music play. • Start, pause, or resume play. b s c d m SOURCE • Press repeatedly to select an audio source. n button/indicator • Turn on the device. • Switch the device to eco power standby mode or normal standby mode. • Indicate the power status. e f r g q p h o o DC IN • Connect to the AC power adaptor. p FM ANT • Connect to the FM antenna.
d PRESET/ALBUM / • Skip to the previous or next album. • Select a preset radio station. e f g • • • / Skip to the previous or next track. Press and hold to search within a track. Tune to a radio station. • Start, pause, or resume play. • Bluetooth Switch to the Bluetooth source. h MENU/ • Stop music play. i Numeric keypad j REPEAT/SHUFFLE • Select a play mode. k SETTINGS • Access the menu of system settings. l SOUND • Access the sound setting for DSC, DBB, and full sound control.
3 Before use Connect the FM antenna Note •• For optimal reception, fully extend the antenna and adjust its position, or connect an outdoor antenna. •• This product does not support MW (medium wave) radio reception. • Connect the AC power adaptor to • the DC IN socket on the back panel, and • the wall outlet. Install/replace the remote control batteries Caution •• Risk of explosion! Keep batteries away from heat, • Connect the FM antenna to the FM ANT socket on the back panel. sunshine or fire.
3 Close the battery compartment. Note •• Before you press any function button on the remote control, first select the correct source with the remote control instead of the main unit. •• If you do not use the remote control in a coming long time, remove the batteries. •• For better reception, point the remote control directly at the IR sensor on the front of the main unit.
4 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. 3 4 5 6 Know the LED indicator status LED indicator in the Indicator (Solid) (Off) button Press / hour digits. Press PROG/CLOCK to confirm. »» The minute digits blink. Press / minute digits.
5 Play Play a disc Note •• WOOX Innovations does not guarantee compatibility with all USB storage devices. •• NTFS (New Technology File System) file system is not supported. Caution •• Never insert any object other than a disc of 12-cm diameter into the disc compartment. 1 2 Press SOURCE repeatedly to switch the source to DISC. • You can also press CD on the remote control to switch the source. Insert a disc into the disc compartment with the printed side facing you.
Buttons / / Functions Precondition Pairing method Skip to the previous or next track. Press and hold to rewind a track or search forward fast within a track. Skip to the previous or next album when one or more album exit. Enter the number of a track to play it. Your Bluetooth device supports both NFC (Near Field Communication) and A2DP (Advanced Audio Distribution Profile). Your Bluetooth device only supports A2DP (Advanced Audio Distribution Profile). Choose Option 1 (recommended) or Option 2.
Option 2: Pair and connect manually 1 2 On the Bluetooth enabled device, search for Bluetooth devices that can be paired (see the user manual of the device). Select 'Philips BTM8010' on your Bluetooth enabled device and if necessary input '0000' as the paring password. »» After successful pairing and connection, the Bluetooth SETUP indicator on the top of the speaker turns solid blue, and the speaker beeps. Stream music through Bluetooth • Play audio on the Bluetooth device connected to the speaker.
6 Listen to FM radio Program radio stations manually Note Tune to an FM radio station Note •• Make sure that you have connected and fully extended the FM antenna. 1 2 Press SOURCE or TUNER/AUDIO IN repeatedly to switch the source to FM tuner. »» FM and the current frequency are displayed. •• You can program a maximum of 20 preset radio stations. •• To overwrite a programmed radio station, store another one with its sequence number.
Display RDS information RDS (Radio Data System) is a service that allows FM stations to show additional information. 1 2 Tune to an RDS radio station. Press DISPLAY/RDS repeatedly to scroll through available information: • Station name • Program type such as NEWS (news), SPORT (sport), POP M (pop music)... • Text messages • RDS clock • Frequency Synchronize clock with RDS You can synchronize system clock with an RDS radio station. 1 2 Tune to an RDS radio station that transmits time signals.
7 Other features Tip •• You can set the hour/minute digits by the numeric keypad. Set alarm timer You can use this system as an alarm clock. Note •• Make sure that you have set the clock correctly. •• If other alarm sources are unavailable, this product switches to FM mode automatically. 1 2 3 4 5 Set sleep timer • • In normal standby mode, press and hold SLEEP/SNOOZE until DISC blinks. Press / alarm source. repeatedly to select an Press SLEEP/SNOOZE to confirm. »» The hour digits blink.
Listen through headphone • Plug a headphone with a 3.5mm plug into the socket on the top panel.
8 Adjust sound The following operations are applicable to all supported media. Adjust volume level • • On the remote control, press VOL +/repeatedly. On the main unit, press VOL+/VOLrepeatedly. Mute sound • Press to mute or restore the sound. Adjust default sound settings 1 2 Press SOUND repeatedly to select one of the setting menus. • DSC: Select a preset sound equalizer. • DBB: Select a DBB sound effect or disable it. • FULL SOUND: Enable to enjoy fullrange sound output.
9 Adjust system settings 1 2 3 Press SETTINGS to access the menu of system settings. »» DIM is displayed. Press / to select a menu option. • DIM, FAC RST, or VERSION Press to view the system status or change system settings. • To return to the upper-level menu, press . Menu Option Function Remarks DIM Select a brightness level of VFD screen. Rest the system to factory default settings. Display the firmware version. 1) Select DIM, and then press . 2) Press / to select a bright level.
10 Product information •• Product information is subject to change without prior notice. Bluetooth version Frequency band Amplifier 2 x 20 W 63 - 14000 Hz, -3 dB > 57 dBA 600 mV RMS Disc Audio DAC Total harmonic distortion Semiconductor 12 cm Audio CD, CD-R, CD-RW, MP3-CD, WMA-CD 24 Bits / 44.1 kHz < 1% Tuner Tuning Range Tuning grid Sensitivity - Mono, 26dB S/N Ratio - Stereo, 46dB S/N Ratio Search Selectivity Total Harmonic Distortion Sensitivity 8 Ohm 2 X 2.
USB playability information RDS program types Compatible USB devices: • USB flash memory (USB 2.0 or USB1.1) • USB flash players (USB 2.0 or USB1.
11 Troubleshooting Warning •• Never remove the casing of this product. To keep the warranty valid, never try to repair the product yourself. If you encounter problems when using this product, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support). When you contact Philips, make sure that the product is nearby and the model number and serial number are available. Problem No power. No sound or poor sound.
Problem Clock/timer setting is erased. Music playback is unavailable on this speaker even after successful Bluetooth connection. The audio quality is poor after connection with a Bluetoothenabled device. Failed to connect a Bluetooth enabled device with this speaker. 24 EN Solution Power is interrupted or cut off. Reset the clock/timer. The Bluetooth device cannot be used to play music through this speaker wirelessly. The Bluetooth reception is poor.
Specifications are subject to change without notice 2013 © WOOX Innovations Limited. All rights reserved. This product was brought to the market by WOOX Innovations Limited or one of its affiliates, further referred to in this document as WOOX Innovations, and is the manufacturer of the product. WOOX Innovations is the warrantor in relation to the product with which this booklet was packaged. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. BTM8010_12_UM_V2.