Always there to help you Register your product and get support at www.philips.
Mains fuse This information applies only to products with a UK mains plug. This product is fitted with an approved molded plug. If you replace the fuse, use one with: • the ratings shown on the plug, • a BS 1362 approval, and • the ASTA approval mark. Contact your dealer if you are not sure about what type of fuse to use. Caution: To conform with the EMC directive (2004/108/EC), do not detach the plug from the power cord. Copyright in the U.K. • Recording and playback of material may require consent.
1 Important Safety Care for your product Care of the environment Compliance Help and support 2 2 3 3 3 3 2 Your product 4 4 5 6 3 Connect and set up 7 7 7 8 Main unit Remote control Connectors Connect the main unit Place speakers Connect to TV Connect audio from TV and other devices 8 4 Use your product 9 9 9 10 10 11 11 11 5 Update software Check software version Update software via USB 12 12 12 6 Product specifications 13 7 Troubl
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Consumer Care to have the product checked before use.
Care for your product Removing the disposable batteries To remove the disposable batteries, see battery installation section. • • Use only microfiber cloth to clean the product, such as removing dust and shedding accumulated on the speaker cloth. Do not use any cleaning solvent to clean the wooden panels and speaker cloth. The wooden panels may vary on color and grain pattern due to the use of natural materials.
2 Your product • Blinks continuously when no audio from the selected HDMI ARC source is detected, or when an unsupported audio format is detected. Blue LED • Lights up when you switch to Bluetooth mode and Bluetooth devices are paired. • Blinks when you switch to Bluetooth mode and Bluetooth devices are not paired. Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
This section includes an overview of the remote control. c a English COAX: Switch your audio source to the coaxial connection. OPTICAL: Switch your audio source to the optical connection. AUDIO IN: Switch your audio source to the AUDIO IN connection (3.5mm jack). Remote control (Mute) Mute or restore volume. d VOL +/Increase or decrease volume. e BASS +/Increase or decrease bass. b f TREBLE +/Increase or decrease treble. c i d g RESET Set the bass and treble to the default settings.
1 Connectors This section includes an overview of the connectors available on this product. On the left speaker a b 2 3 c d e f a AUDIO IN Audio input from, for example, an MP3 player (3.5mm jack). 1 2 3 Open the battery compartment. Insert one CR2025 battery, with the polarity (+/-) as indicated. Close the battery compartment. b USB connector (not for media play) • Used for software upgrade of this product. • Used to charge a USB device.
a b a TO L SPEAKER Connect to the left speaker. b AC MAINS~ Connect to the power supply. This section helps you connect this product to a TV and other devices, and then set it up. For information about the basic connections of this product and accessories, see the quick start guide. Note •• For identification and supply ratings, see the type plate at the back or bottom of the product. •• Before you make or change any connections, make sure that all devices are disconnected from the power outlet.
1 2 Using a High Speed HDMI cable, connect the HDMI ARC connector on the left speaker to the HDMI (ARC) input on the TV. • The HDMI ARC connector on the TV might be labeled differently. For details, see the TV user manual. On your TV, turn on HDMI-CEC operations. For details, see the TV user manual. Note •• If your TV is not HDMI ARC compliant, connect an audio cable to hear the TV audio through the speakers of this product (see 'Connect audio from TV and other devices' on page 8).
Best quality audio TV Using an optical cable, connect the OPTICAL connector on the left speaker of this product to the OPTICAL OUT connector on the TV or other device. • The digital optical connector might be labeled SPDIF or SPDIF OUT. Option 2: Connect audio through a digital coaxial cable 4 Use your product English Option 1: Connect audio through a digital optical cable This section helps you use this product to play audio from connected devices.
Equalizer Change the high frequency (treble) and low frequency (bass) settings of this product. 1 2 Press TREBLE +/- or BASS +/- to change the frequency. »» If the treble or bass is set to the maximum or minimum, the white LED on the speaker blinks twice. To reset the bass and treble to the default setting, press RESET . Synchronize picture and sound If the audio and video are not synchronized, delay the audio to match the video. 1 Press AUDIO SYNC +/- to synchronize the audio with the video.
To exit Bluetooth, select other source. • When your switch back to Bluetooth mode, Bluetooth connection remains active. 3 Select and play audio files or music on your NFC device. • To break the connection, tap again the NFC device with the NFC tag on this product. Note •• The music streaming may be interrupted by obstacles between the device and this product, such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency.
5 Update software 5 To get the best features and support, update your product with the latest software. What you need • Connect this product to your TV. Check software version • In HDMI ARC mode, press TREBLE -, BASS - and VOL - on the remote control. Update software via USB 1 2 Check the latest software version on www.philips.com/support. • Search for your model and click on "Software and drivers". Download the software into a USB storage device.
Note •• Specifications and design are subject to change without • • •• •• Speaker impedance: • Woofer: 4 ohm • tweeter: 8 ohm Speaker drivers: 2 x 101.6 mm (4") woofer + 2 x 25.4 mm (1") tweeter Dimensions (WxHxD): 160 x 305 x 160 mm Weight: 4.4 kg notice. Remote control batteries Amplifier • • • • Total output power: 100W RMS (+/- 0.5 dB, 30% THD) / 80W RMS (+/- 0.
7 Troubleshooting Warning •• Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/support. Main unit Bluetooth A device cannot connect with this product. • The device does not support the compatible profiles required for this product.
Specifications are subject to change without notice 2014 © WOOX Innovations Limited. All rights reserved. This product was brought to the market by WOOX Innovations Limited or one of its affiliates, further referred to in this document as WOOX Innovations, and is the manufacturer of the product. WOOX Innovations is the warrantor in relation to the product with which this booklet was packaged. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. BTS7000_10_UM_V3.