Always there to help you Register your product and get support at www.philips.
Contents 1 Important Safety Care for your product Care of the environment Compliance Help and support Mains fuse 2 2 3 3 3 3 4 2 Your product 5 5 5 7 3 Connect and set up 9 9 9 9 Main unit Remote control Connectors Connect the main unit Place speakers Connect to TV Connect audio from TV and other devices 10 4 Use your product 11 11 11 11 12 12 13 13 5 Update software Check software version Update software via USB 14 14 14 6 Product sp
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Consumer Care to have the product checked before use.
Care for your product • • Use only microfiber cloth to clean the product, such as removing dust and shedding accumulated on the speaker cloth. Do not use any cleaning solvent to clean the wooden panels and speaker cloth. The wooden panels may vary on color and grain pattern due to the use of natural materials. Care of the environment Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
Mains fuse This information applies only to products with a UK mains plug. This product is fitted with an approved molded plug. If you replace the fuse, use one with: • the ratings shown on the plug, • a BS 1362 approval, and • the ASTA approval mark. Contact your dealer if you are not sure about what type of fuse to use. Caution: To conform with the EMC directive (2004/108/EC), do not detach the plug from the power cord. Copyright in the U.K. • Recording and playback of material may require consent.
2 Your product • Blinks continuously when no audio from the selected HDMI ARC source is detected, or when an unsupported audio format is detected. Blue LED • Lights up when you switch to Bluetooth mode and Bluetooth devices are paired. • Blinks when you switch to Bluetooth mode and Bluetooth devices are not paired. Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
c (Mute) Mute or restore volume. d VOL +/Increase or decrease volume. a e BASS +/Increase or decrease bass. b f TREBLE +/Increase or decrease treble. c i d g RESET Set the bass and treble to the default settings. h AUDIO SYNC +/Increase or decrease audio delay. e f h i SURR. SOUND ON/OFF Turn surround sound on or off. Replace battery g Warning •• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
1 On the left speaker a b 2 c d 3 e f a AUDIO IN Audio input from, for example, an MP3 player (3.5mm jack). b USB connector (not for media play) • Used for software upgrade of this product. • Used to charge a USB device. c OPTICAL Connect to an optical audio output on the TV or a digital device. 1 2 3 Open the battery compartment. Insert one CR2025 battery, with the polarity (+/-) as indicated. Close the battery compartment. Connectors d HDMI ARC Connect to the HDMI (ARC) input on the TV.
On the right speaker a b a TO L SPEAKER Connect to the left speaker. b AC MAINS~ Connect to the power supply.
3 Connect and set up This section helps you connect this product to a TV and other devices, and then set it up. For information about the basic connections of this product and accessories, see the quick start guide. Note •• For identification and supply ratings, see the type plate at the back or bottom of the product. •• Before you make or change any connections, make sure that all devices are disconnected from the power outlet.
1 2 Using a High Speed HDMI cable, connect the HDMI ARC connector on the left speaker to the HDMI (ARC) input on the TV. • The HDMI ARC connector on the TV might be labeled differently. For details, see the TV user manual. Option 1: Connect audio through a digital optical cable Best quality audio TV On your TV, turn on HDMI-CEC operations. For details, see the TV user manual.
4 Use your product 1 This section helps you use this product to play audio from connected devices. Before you start • Make the necessary connections described in the quick start guide and the user manual. • Switch this product to the correct source for other devices. 2 If the audio and video are not synchronized, delay the audio to match the video. 1 Press VOL +/- to increase or decrease a volume level. • To mute sound, press (Mute). • To restore the sound, press (Mute) again or press VOL +/-.
Play music via Bluetooth Through Bluetooth, connect your product with a Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio files stored on the device through the speakers of this product. What you need • A Bluetooth device which supports Bluetooth profile A2DP, and with Bluetooth version as 3.0 (EDR). • The operational range between the main unit (left and right speakers) and a Bluetooth device is approximately 10 meters (30 feet).
Auto standby If no audio/video playback is detected from a connected device for 30 minutes, this product automatically switches to standby. Apply factory settings You can reset this product to the default settings programmed at the factory. 1 In OPTICAL mode, press and hold RESET for five seconds. »» When the factory settings restore is complete, the product automatically switches off and restarts.
5 Update software To get the best features and support, update your product with the latest software. What you need • Connect this product to your TV. Check software version • In any source mode, press TREBLE -, BASS - and VOL - on the remote control. Update software via USB 1 2 Check the latest software version on www. philips.com/support. • Search for your model and click on "Software and drivers". Download the software into a USB storage device.
6 Product specifications •• •• • • Note •• Specifications and design are subject to change without notice. •• •• Power consumption: 50 W Standby power consumption: ≤ 0.5 W Speaker impedance: • Woofer: 4 ohm • tweeter: 8 ohm Speaker drivers: 2 x 101.6 mm (4") woofer + 2 x 25.4 mm (1") tweeter Dimensions (WxHxD): 160 x 305 x 160 mm Weight: 4.4 kg Remote control batteries Amplifier • • • • • 1 x CR2025 Total output power: 100W RMS (+/- 0.5 dB, 30% THD) / 80W RMS (+/- 0.
7 Troubleshooting Warning •• Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www. philips.com/support. Main unit The buttons on this product do not work. • Disconnect this product from the power supply for a few minutes, then reconnect.
Specifications are subject to change without notice 2013 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. BTS7000_12_UM_V1.
