Register your product and get support at www.philips.
Contents 1 Important Safety Notice 2 Your camcorder Introduction What's in the box Functional overview 3 Get started Load the Micro SD card Turn on users only) Select a menu display language 4 Use your camcorder Record video Take pictures Play Options during video play Adjust settings 5 Use more of your camcorder View video or pictures on TV Install and use the camcorder software 2 2 2 4 4 4 5 7 7 7 7 7 9 9 9 9
1 Important Safety a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or produce heat.
Always bring your product to a professional to - # Note 8 The safety logo and power rating information are located at the USB arm of the camcorder.
2 Your camcorder Introduction With this portable camcorder, you can: 8 ; <= +! !*> ?@ - 8 take pictures 8 play recorded movies or pictures either directly or on the large screen of a connected TV 8 upload the recorded movies or pictures to the Internet directly What's in the box Make sure that the following items are packed in the box: 8 Camcorder 8 Quick start guide 8 Pouch 8 Hand strap 4 EN
Functional overview a p o n b m c d l e f k j i g h a Built-in speaker b Display panel c +/8 8 8 8 - ( E G # Navigate up/down in a menu. Change a value in the settings menu. = - ( - # 8 * on the display panel. d Shutter button 8 - ( ; start/stop video recording. 8 ( - mode.
e 8 - ( mode. 8 ( - # 8 # f MICRO SD 8 Connect a Micro SD card. g / 8 Navigate left/right in a menu. 8 Select a menu option. 8 ( - G K picture/video clip. 8 - ( settings menu. h USB connector i 8 Eject the USB connector. j Tripod socket k Hand strap hole l HDMI 8 Connect to a TV through an HDMI cable with a mini HDMI connector.
3 Get started Tip 8 $ - ( after being idle for 3 minutes. Load the Micro SD card Set the date and time " \ ( # 1 2 3 Flap open the protective cover on the Micro SD card socket. Insert a Micro SD card (not supplied) into the socket. 8 Ensure that the the Micro SD card is # 8 Ensure that the metal contact of the card faces down.
6 Press - # Charge the built-in battery 1 Press at the bottom of the camcorder to eject the USB connector. 2 Connect the USB connector to a USB socket on a PC.
4 Use your camcorder Play 1 - ( to enter play mode. » The last recorded video clip is played automatically. 2 Press / to select a picture or video clip for play. 3 - ( to start play. Record video 1 Switch the mode switch button to . » The selected resolution and remaining recording time are displayed on the display panel. 2 Hold the camcorder steadily and aim the lens as needed.
Adjust settings 1 - ( . » A settings menu appears. 2 3 4 Press +/- to highlight an option. Press to select a setting. Press - # [Scene] [Effects] [Resolution] [Volume] [Date] [Time] [Auto power] [Capture sound] [Language] [Pre-record] [TV system] [Format] 10 / EN Description Select an automatic exposure mode that matches your shot for easy shooting. Add a special effect to your shooting. Select a video resolution.
5 Use more of your camcorder Install the camcorder software 1 * [@ [ { [ [># 2 If the software does not install ( ; Setup icon at My Computer\Removable Disk. 3 % installation of the software.
3 Copy any video/pictures you want to your designated folder in the PC/Mac. Tip 8 } - G camcorder software (for PC) or iMovie (for Mac).
6 Technical specifications TV out Weight Dimensions (W x H x D) $ G* ( z HDMI (type C) 0.06kg 55.3 x 99.4 x 17.3 mm Product information is subject to change without prior notice. Image sensor Operation modes Lens (focusing) Focus mode Focus range Aperture = E Exposure control Exposure compensation White balance Auto power off Memory Shutter type Shutter speed * format Video compression format Video resolution Battery PC interface System support 1/3.
7 Frequently asked questions (FAQ) Why is there no response when I use the camcorder? % $ # $ [@ [ { 'Turn on'). % $ # [@ [ { [ [># Why is [Memory full!] displayed when I try to record? % Ensure that the Micro SD card has been [@ [ { 'Load the Micro SD card'). % The memory is used up.
( ( K the colors might seem a bit unnatural. < - ( corrected automatically by the camcorder. Can I connect the camcorder directly to TV, DVD/Blu-ray player or Home Cinema set via their USB-port? % The USB plug is designed to share your videos/pictures to your PC or Laptop.
Tips on video making % You can easily look back on fun moments and relive them with the camcorder. To ( are some simple video tips: 8 \ - ( camcorder steady in your hand 8 Don't move too fast when panning (i.e. - E > will be hard to follow what is captured when you review the video 8 $ K ( ( ( or even from below.
Register online at www.philips.com/welcome today to get the very most from your purchase. Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below,so don't miss out. Register online at www.philips.com/welcome to ensure: *Product Safety Notification *Additional Benefits By registering your product, you'll receive notification - directly from the manufacturer.
PHILIPS LIMITED WARRANTY ONE (1) YEAR WARRANTY COVERAGE: PHILIPS warranty obligation is limited to the terms set forth below. WHO IS COVERED: Philips warrants the product to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase (“Warranty Period”) from an Authorized Dealer. The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof.
Specifications are subject to change without notice © 2011 Koninklijke Philips Electronics N.V. All rights reserved. CAM102_37_UM_V1.