Register your product and get support at www.philips.
1 Important Safety Notice 2 Your car audio system Introduction What’s in the box Overview of the main unit Overview of the remote control 3 Get started Install the car audio Install remote control battery Turn on Set clock 4 Listen to radio Tune to a radio station Store radio stations in memory Tune to a preset station 3OD\ DXGLR ÀOHV Play a disc Control play Search for an MP3/WMA track View play information Intro play 6KXIÁH SOD\ Repeat play Connect external sound source 6 Adjust sound Adjust vol
1 Important Notice Safety Read and understand all instructions before you use your apparatus. If damage is caused by failure to follow instructions, the warranty does not apply. This apparatus is designed for negative ground (earth) 12 V DC operation only. To ensure safe driving, adjust the volume to a safe and comfortable level. Improper fuses can cause damage or ÀUH :KHQ \RX QHHG WR FKDQJH WKH IXVH consult a professional.
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed-out wheel bin symbol attached to a product, it means the product is covered by the European Directive 2002/96/EC: Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products.
2 Your car audio system Congratulations on your purchase, and ZHOFRPH WR 3KLOLSV 7R IXOO\ EHQHÀW IURP WKH support that Philips offers, register your product at www.philips.com/welcome.
E n g lish Overview of the main unit a Select tuner band. Select MP3/WMA folder. Scroll up or down menu. b DBB Turn on or off Dynamic Bass Boost (DBB) sound. e MENU / DISP Display radio frequency, clock and radio program type (if available). Display track, elapsed time, artist, DOEXP WLWOH IROGHU ÀOH DQG FORFN Access system menu. f c SOURCE Select audio source. d /MUTE Turn the unit on or off. Adjust volume.
j 6 Select preset station no. 6 k 5 Select preset station no. 5 Overview of the remote control l SHUF, 4 $FWLYDWH RU GHDFWLYDWH VKXIÁH PRGH Select preset station no. 4 q m 3, REP Set repeat play mode. Select preset station no. 3 o n INTRO, 2 Turn intro play on or off. Select preset station no. 2 o 1, p Start play Pause or resume play. Select preset station no. 1 p b n l c d e k f j g m h / i Tune to a radio station Skip/search for a track.
h 6 i 5 Caution Select preset station no. 6. Select preset station no. 5. Start play. Pause or resume play. Select preset station no. 1. l INTRO, 2 Turn intro play on or off. Select preset station no. 2. m AUDIO Access audio setting menu. n Navigation buttons / Tune for radio station Skip/search for MP3/WMA track. / Select tuner band. Select MP3/WMA folder. SEL &RQÀUP VHOHFWLRQ o MENU Access system menu. p PWR, Turn the unit on or off. Mute or restore volume.
Note on the power supply lead (yellow) When you connect other devices to this apparatus, ensure that the rating of the car circuit is higher than the total fuse value of all the connected devices. Notes on speaker connection Never connect speaker wires to the metal body or chassis of the car. Never connect speaker wires with stripes to one another. Connection: for cars with ISO connectors Caution Ensure that all loose leads are insulated with electrical tape.
a a b c b c a a b b c c d d d d c L -CH e g R-CH AMP b Connector 1 ANTENNA 2 REAR LINE OUT R 3 REAR LINE OUT L Connect to Antenna Rear right speaker Rear left speaker Connection: for cars without ISO connectors Caution Be sure to connect the black ground (earth) OHDG ÀUVW 1 &RQQHFW WKH DQWHQQD DQG DPSOLÀHU DV illustrated, if applicable. Cut off the bigger end of the supplied standard connector.
Tip The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit. 4 Ensure that car dashboard opening is within these measurements: Mount in the dashboard 2 m 5m If the car does not have an on-board drive or navigation computer, disconnect the negative terminal of the car battery.
E n g lish m 5m 6 Place the supplied rubber cushion over the end of the mounting bolt. 2 Insert the right side of the panel in the chassis until it is correctly engaged. 3 Press the left side of the panel and point the left hole at the left pillar. 4 Release the panel to engage the left side. Install remote control battery 7 Slide the unit into the dashboard until you hear a click sound. 8 Reconnect the negative terminal of the car battery. Attach the front panel 1 Attach the trim plate.
To replace the remote control battery: 1 2 Open the battery compartment. 3 Close the battery compartment. Insert 1 CR2025 batteries with correct polarity (+/-) as indicated. 4 Listen to radio Tune to a radio station 1 Press SOURCE repeatedly to select Tuner. 2 Press or to select band: [FM1], [FM2], [FM3], [AM1], or [AM2] . 3 Press or to tune to a radio station manually. » The radio station is broadcast. To search for a radio station automatically, press or for 3 seconds.
5 Play audio files E n g lish Store radio stations in memory You can store up to 6 stations in each band. Note Store staions automatically 1 Press SEARCH ÀUVW WKHQ SUHVV . » The six strongest stations of the selected band are saved in preset channel automatically: FM1,FM2,FM3 1-6, AM1, AM2. Ensure that the disc or device contains playable ÀOHV Play a disc Note Store staions manually 1 Tune to a station that you want to store.
Control play Intro play
Select preset equalizer 1 Press EQ/Audio. » The current Equalizer setting is displayed. 2 Press EQ/Audio again repeatedly to select a preset EQ: [OPTIMAL] (optimal) [FLAT] ÁDW [POP] (pop) [USER] (user) [TECHNO] (techno) [ROCK] (rock) [CLASSIC] (classic) [JAZZ] (jazz) Adjust volume 1 Turn clockwise/anticlockwise to increase/decrease volume. Mute You can turn off the sound of your audio. 1 During play, press MUTE . To turn the sound back on, press MUTE again.
7 Adjust system settings 3 Press or repeatedly to until [A-VOL] is displayed. 4 Turn Turn demo mode on/off Turn beep sound on/off When demo mode is on, when the unit is idle for more than 2 minutes, all functions are displayed. Each time you press a button, the unit beeps. You can turn off/on this beep sound. 1 2 3 Press MENU/DISP for 3 seconds. Press or repeatedly to until [DEMO] is displayed. » The screen shows current Demo mode setting.
You can select the shock protection setting, depending on the stability of your car and the condition of the road. 1 2 3 Press MENU/DISP for 3 seconds. Press or displayed. repeatedly until [ESP] is Turn to select a setting: [ESP 10 S]: select this when the road is smooth and there are few bumps. [ESP 40 S]: select this when the road is bumpy and unstable. 8 Additional information E n g lish Select shock-protect setting Detach the front panel You can detach the front panel to deter theft.
Replace fuse Remove the unit If the fuse is damaged, You can remove the unit from the dashboard. 1 2 Check the electric connection. 1 2 3 Replace the fuse. Buy a fuse that matches the voltage of the damaged fuse. SE15FA U Note If the new fuse gets damaged again, there may be an internal malfunction. Consult your Philips dealer. 20 EN Detach the front panel. Pull out the unit by using the removal keys.
10 Troubleshooting E n g lish 9 Product information Caution Never remove the casing of this apparatus. Note Product information is subject to change without prior notice. Power supply Fuse Suitable speaker impedance Maximum power output Continuous power output Pre-Amp output voltage Aux-in level Dimensions (W x H x D) Weight 12 V DC (11 V - 16 V), negative ground 15 A 4-8 45 W x 4 channels 22 W x 4 RMS (4 10% T.H.D.) 2.0 V 500 mV 188 x 58 x 206 mm 1.
The CD skips tracks Ensure that the CD is not damaged or dirty. Ensure that random mode is deactivated. Disc cannot be ejected Press and hold . Preset stations lost. Battery cable is not correctly connected. Connect the battery cable to the terminal that is always live. 11 Glossary M MP3 $ ÀOH IRUPDW ZLWK D VRXQG GDWD FRPSUHVVLRQ system. MP3 is the abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio Layer 3.
23
24
25
© 2009 Koninklijke Philips Electronics N.V. All rights reserved. CED200_55_UM_V1.
