EN User manual Charge the handset(s) for 24 hours before use !
Welcome mode EN Before using your CD 130, you need to configure it according to the country of use. Install the batteries. After a few minutes of charge, the Welcome screen appears. 1. Press . 2. Browse through the different countries. 3. Press to confirm the country that suits you. Your phone is ready to be used. If you need to re-configurate your CD 130, see page 32. Note: If BACK is pressed, the handset will show the country selection screen again.
Welcome mode EN Before using your CD 130, you need to configure it according to the country of use. Install the batteries. After a few minutes of charge, the Welcome screen appears. 1. Press . 2. Browse through the different countries. 3. Press to confirm the country that suits you. Your phone is ready to be used. If you need to re-configurate your CD 130, see page 32. Note: If BACK is pressed, the handset will show the country selection screen again.
Contents EN Welcome mode ...................................................2 Contents ..............................................................3 Important information .......................................4 What’s in the box ................................................5 Handset and base station ...................................6 Icons on the handset display ..............................8 Installing the base station ...................................9 Installing the batteries ...............
Important information EN For your safety Before installing your CD 130, carefully read the following informations: Power requirements > This product requires an electrical supply of 220-240 volts, alternating monophased power, excluding IT installations defined in standard EN 60950. In case of power failure, the communication can be lost. Warning ! The electrical network is classified as hazardous according to criteria in the standard EN 60950.
What’s in the box EN - + + - One CD 130 base station A power supply unit User manual One CD 130 handset 2 NiMh AAA 550 mAh rechargeable batteries A line cord* One belt clip (Country dependent) Guarantee Quick Start Guide *Note : You may find in the box the line adaptor delivered separately from the line cable. In this case, please connect the line adaptor to the line cable before connecting it to the line socket.
Handset and base station EN CD 130 Handset 1 2 1 3 2 3 4 4 5 6 5 7 8 12 11 9 10 6 7 6 Earpiece Display Icons see page 8 Menu key & Softkey OK - In idle mode, short press to access the main menu. - Short press to select next menu level. - In Edit & Phonebook mode, short press to confirm OK. - In Call log or Redial list to save the selected record in the phonebook. Redial list, mute key & Softkey Back - In idle mode, short press to access the Redial list.
Handset and base station EN 8 Intercom - Short press to initiate an internal call. 9 Recall key - In idle mode, long press to switch from handset name display to Date/Time display. - To insert R for operator services when on line. 10 Microphone 11 Keypad lock & insert - Short press to insert - Long press to lock/unlock the keypad in idle mode. 12 Pick-up key - In idle mode, press to take the line and answer a call. - In Phonebook mode, Redial list and Call log press to dial the selected number.
EN Icons on the handset display The display gives information about the operation of your telephone. Following icons can be shown in the headline of the display: When being used for the first time, it is sometimes necessary to wait until the battery is sufficiently charged before the icons appear on the display. When ON the battery is fully charged. When blinking, this symbol indicates that the battery needs to be charged. An external call is in progress.
Installing the base station EN Installing the base station Place your product close enough to the telephone and mains power sockets so that the cables will reach. To properly install the base station, plug the line cord and the power cable into the base station. Plug the cord and the cable into the wall.
Installing the batteries EN Installing and replacing the batteries in the handset To insert the batteries, open the battery cover, place the batteries as indicated and then replace the battery cover. When the battery icon is blinking, charge is needed. Allow 24 hours for the batteries to fully charge. On first use it may be necessary to wait for a few minutes before seeing symbols on the display. Warning : the base station must always be plugged into the mains when charging or when in use.
Using GAP standard compliance EN To register a handset of another make to the CD130 base station, place the base station into registration mode (page 30), then follow the procedure in the manufacturer’s instructions. DECTTM is a Trade Mark of ETSI registered for the benefit of the implementers of the DECT technology. Using the menus From idle mode, press Navigation keys Press Softkey OK BACK to enter the menu. Use the to go up or down in the menu list. OK to confirm the selection.
Menu structure EN PHONEBOOK ADD NUMBER EDIT NUMBER DEL.
Text or number entry EN You can enter the names of your phonebook entries character by character, pressing the corresponding key as many times as necessary to reach the desired character. Press under the label to delete a character.
Call EN Answering a call / Hanging up 1. When the phone rings, press to answer the call. 2. To end the conversation, press key or replace the handset on the base station. Note: If you have activated the Auto Answer Mode (see page 27) simply lift-up the handset from the base or charger to answer a call. flashes on an incoming call. WARNING : When the handset rings during an incoming call, please do not hold the handset too close to your ear as the volume of the ringing tone may damage your hearing.
Call EN To switch the handset loudspeaker ON / OFF (call handsfree) Note: 5 loudspeaker volumes are available. indicates the loudspeaker is ON. 1. Press 2 times to activate the handset loudspeaker. 2. Press again to deactivate the loudspeaker. Warning : Handsfree activation could suddenly increase the volume in the loudspeaker to a very high level. Make sure the handset is not too close to your ear.
Redial list EN The redial list contains the 5 most recently dialled numbers. Accessing / exiting the redial list 1. Press . 2. Scroll through the redial list 3. Press . to exit. Calling a number from the redial list 1. Press . 2. Scroll through the redial list 3. Press . . Saving redial list numbers into the phonebook 1. Press and scroll to select an entry. 2. Press , SAVE NUMBER is shown. 3. Press , ENTER NAME is shown. 4.
Redial list EN Deleting a number from the redial list 1. Press and scroll to select an entry. 2. Press and press Down 3. Press , DELETE? is shown, press confirmation beeptone. to reach DEL. NUMBER. to confirm. You will hear a long Deleting all numbers from the redial list 1. Press , then and press Down 2. Press , DELETE? is shown, press confirmation beeptone. to reach DELETE LIST. to confirm.
Phonebook EN 30 names and numbers can be stored in the built-in phonebook of the handset. The names are stored in alphabetical order. Adding a new entry 1. In idle mode, press 2. Press , ADD NUMBER is shown. , PHONEBOOK is shown. 3. Press , ENTER NAME is shown. 4. Enter the name 5. Enter the number and press , ENTER NUMBER is shown. and press to confirm. Note: To delete a character use Text and number entry see page 13. . Press for spacing. Note: Press or to return to idle mode.
Phonebook EN Viewing the phonebook list 1. In idle mode, press Down and scroll Up/Down in the list, OR Enter the first letter of the wanted name (e.g., 3 for “D” or 33 for “E”). The first entry starting with this letter is selected in the list. 2. To view the details : Press . Edit a number when browsing phonebook list 1. In idle mode, press Down and scroll to select an entry. 2. Press and press Down 3. Press to view the current name and enter the new name 4.
Phonebook EN Delete a phonebook entry when in idle mode 1. In idle mode, press , PHONEBOOK is shown. 2. Press and press Down 3. Press to view the list and scroll 4. Press , DELETE? is shown, press confirmation beeptone. to reach DEL. NUMBER. to select an entry. to confirm. You will hear a long Delete whole phonebook list when in idle mode 1. In idle mode, press 2. Press 3. Press , DELETE? is shown, press confirmation beeptone. 20 , PHONEBOOK is shown.
Call log EN This feature is available if you have registered to the caller identification service with your operator. The call log stores the last 20 external calls received : - network message service information (subject to a subscription with your operator). Accessing / exiting the call log 1. Press Up and scroll to select an entry. 2. Press to view the details. 3. Press to exit the call log.
Call log EN Deleting a Call log entry 1. Press Up and scroll to select an entry. 2. Press and press Down 3. Press , DELETE? is shown, press to reach DEL NUMBER. Deleting all the Call log entries 1. Press Up 2. Press Down 3. Press 22 and press . to reach DELETE LIST. to confirm. to confirm.
Using the Intercom EN This function can only be used with a multi-handset configuration. It allows you to make free internal calls, transfer external calls from one handset to another and to use the conference option. Note: Intercom & call transfer is only possible with handsets registered to the same base station. Internal call 1. Press 2. Enter the handset number (up to 5 handsets can be registered to the same base station [handset number 1 - 5]) OR press 3. . to call all handsets.
Other functions EN Paging This feature allows you to locate the handset(s). Press on the base station. All the subscribed handsets ring. Press any key on the handset to stop ringing once relocated. Chain Dialing If you have entered in your phonebook for example only the main number of a company without the extension, this feature allows you to add the subnumber (extension) of a particular person and to dial out this number. 1. Take the line and press 2. Scroll 3.
Other functions 3. Press , scroll ON DAILY). EN to select the appropriate setting (OFF or ON ONCE or 4. Press to confirm. If you select ON ONCE or ON DAILY : Enter the time and press to confirm. The alarm rings for at most 1 minute and is shown in idle mode. Note: When the alarm rings, press any key to stop the alarm. To set the alarm tone 1. Press and press Down to reach CLOCK/ALARM. 2. Press and press Down to reach ALARM TONE. 3.
Personal settings EN WARNING : When the handset rings during an incoming call, please do not hold the handset too close to your ear as the volume of the ringing tone may damage your hearing. To select the handset ring melody 1. Press and press Down to reach PERSONAL SET. 2. Press , HANDSET TONE is shown, press reach RING MELODY. 3. Press , scroll ring melody is played. 4. Press and scroll Down to to select one of the available melodies 1- 10. The current to confirm.
Personal settings EN To activate / deactivate the auto answer mode If ON you take the line by lifting the handset from the charge cradle. 1. Press and press Down to reach PERSONAL SET. 2. Press and press Down to reach AUTO ANSWER. 3. Press , scroll to select ON or OFF and press to confirm. To change the display language 1. Press and press Down to reach PERSONAL SET. 2. Press and press Down to reach LANGUAGE. 3. Press , scroll to select your language and press to confirm.
Advanced settings EN To change the dial mode* *Country dependent The default value of dial mode that is preset in your CD 130 should be the best suited for your country network and therefore you should not need to change it. 1. Press and press Down to reach ADVANCE SET. 2. Press and press Down to reach DIAL MODE. 3. Press , scroll to select TONE or PULSE and press to confirm.
Advanced settings 5. Scroll 6. Enter the barring number EN to select the barring number location 1, 2, 3 or 4 and press . (the maximums for the barring number is 4 digits) and press to confirm. Note: For example if you want to bar international calls, enter the barring number 00. To activate / deactivate Call Barring 1. Press and press Down to reach ADVANCE SET. 2. Press and press Down to reach CALL BARRING. 3. Press and enter the PIN code 4.
Advanced settings EN To set or change an SOS number The SOS number feature allows you to enter 3 SOS phone numbers, which can be dialed out although the call barring is activated. The maximum length of an SOS number is 4 digits. The PIN code is required when modify the SOS number. 1. Press and press Down to reach ADVANCE SET. 2. Press and press Down to reach SOS NUMBER. 3. Press and enter the PIN code 4. Press , scroll (by default the PIN code is 0000).
Advanced settings EN To unregister a handset 1. Press and press Down to reach ADVANCE SET. 2. Press and press Down to reach UNREGISTER. 3. Press , enter the PIN code (by default the PIN code is 0000) and press . 4. Scroll to select the handset number and press . UNREGISTERED appears on the screen. Note: If you have your handset serviced, please make sure it is unregistered from the base station before taking it back to the repair centre.
Advanced settings EN Country selection Use this feature if you need to re-configurate your CD 130. 1. Press and press Down to reach ADVANCE SET. 2. Press and press Down to reach COUNTRY SEL.. 3. Browse through the different countries and press that suits you. 4. CONFIRM? is shown, press to confirm.
Troubleshooting EN Telephone troubleshooting PROBLEMS CAUSES The battery icon is not blinking when the handset is placed on the base. • Bad battery contact. • Dirty contact. No dialling tone. • No power. • Battery is full. SOLUTIONS • Move the handset slightly. • Clean the contact with a cloth moistened with alcohol. • No need to charge. • Line adaptor (when needed) not connected to the line cord. • Check the connections. Reset the phone : unplug and plug back in the mains.
Troubleshooting EN PROBLEMS The handset displays „not available“ : • when attempting to add another handset to the base station, • when using a handset. CAUSES • The procedure to add a handset has failed, try again. • Maximum number of handsets (5) has been reached. • Base station is already busy with another handset. SOLUTIONS • Disconnect and connect the base station power supply. • Remove and place back the handset batteries. • Follow the procedure to register a handset (page 30).
Informations EN Safety information This equipment is not designed to make emergency calls when the power fails. An alternative has to be made available to allow emergency calls. Conformity Hereby, Philips declares that the CD 130 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This product can only be connected to the analogue telephone networks of the countries mentioned on the packaging. The Declaration of conformity is available on www.p4c.
EN 36 Notes
Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. 2006 © Koninklijke Philips Electronics N.V. All rights reserved. www.philips.
