Register your product and get support at www.philips.com/welcome CD170 CD175 DE Benutzerhandbuch IFU_CD170-175_38_DE.
Philips Consumer Lifestyle AQ95-56F-1221_2KR 2010 ........................................................ (Report No.) ........................................................................... (Year in which the CE mark is affixed) EC DECLARATION OF CONFORMITY We, PHILIPS CONSUMER LIFESTYLE B.V. TUSSENDIEPEN 4, 9206 AD DRACHTEN, THE NETHERLANDS Declare under our responsibility that the electrical product(s): PHILIPS .......................................................................
1 Wichtige Sicherheitshinweise Konformitätserklärung Einhaltung des GAP-Standards Elektromagnetische Verträglichkeit Entsorgung von Altgeräten und Batterien 2 Ihr CD170/CD175 Lieferumfang Übersicht über das Telefon Übersicht über die Basisstation Anzeigesymbole 3 Erste Schritte Anschließen der Basis- bzw.
Löschen eines Wahlwiederholungseintrags Löschen aller Wahlwiederholungseinträge 15 Standardeinstellungen 38 24 16 Technische Daten 39 10 Benutzerdefinierte Einstellungen 25 25 25 17 Häufig gestellte Fragen (FAQ) 40 11 Anruffunktionen 27 27 Personalisieren der Telefonanzeige Personalisieren der Töne Wählmodus Auswählen der Wahlwiederholungsdauer Verwalten der Ortsvorwahl Anbietervorwahl Erstes Klingeln ECO-Modus 24 27 27 28 28 28 12 Zusätzliche Funktionen 29 29 29 30 30 13 Erweiterte Einste
Stromanforderungen • Dieses Produkt benötigt einen elektrischen Anschluss mit 100 bis 240 Volt Wechselstrom. Im Falle eines Stromausfalls kann die Verbindung abbrechen. • Die Spannung im Telefonnetz wird als TNV-3 (Telecommunication Network Voltages) gemäß Standard EN 60950 eingestuft. Warnung •• Das elektrische Netz wird als gefährlich eingestuft. Um das Ladegerät abzuschalten, muss das Netzkabel aus der Steckdose gezogen werden. Stellen Sie sicher, dass die Steckdose jederzeit frei zugänglich ist.
Dieses Produkt wurde gemäß der europäischen R&TTE-Richtlinie 1999/5/EC konzipiert, getestet und gefertigt. Unter Einhaltung dieser Richtlinie kann dieses Produkt in den folgenden Ländern genutzt werden: Einhaltung des GAPStandards Der GAP-Standard garantiert, dass alle DECT™-GAP-Mobilteile und -Basisstationen unabhängig vom Hersteller einen Mindestbetriebsstandard einhalten.
Ihr Gerät wurde unter Verwendung hochwertiger Materialien und Komponenten entwickelt und hergestellt, die recycelt und wiederverwendet werden können. Befindet sich dieses Symbol (durchgestrichene Abfalltonne auf Rädern) auf dem Gerät, bedeutet dies, dass für dieses Gerät die Europäische Richtlinie 2002/96/EG gilt. Informieren Sie sich über die örtlichen Bestimmungen zur getrennten Sammlung von elektrischen und elektronischen Geräten.
2 Ihr CD170/ CD175 Herzlichen Glückwunsch zu Ihrem Kauf und willkommen bei Philips! Um das Kundendienstangebot von Philips vollständig nutzen zu können, sollten Sie Ihr Produkt unter www.philips.com/welcome registrieren. Lieferumfang Mobilteil** Basisstation (CD170) Ladestation** Netzteil** Basisstation (CD175) 8 DE IFU_CD170-175_38_DE.
D e u ts ch Übersicht über das Telefon Telefonkabel* Garantie Betriebsanleitung Kurzanleitung Hinweis •• * In einigen Ländern müssen Sie den Leitungsadapter mit dem Telefonkabel verbinden und anschließend das Telefonkabel in die Telefonbuchse stecken. Hinweis •• ** Bei Modellen mit mehreren Mobilteilen sind auch zusätzliche Mobilteile, Ladestationen und Netzteile im Lieferumfang enthalten. DE IFU_CD170-175_38_DE.
1 2 Ohrhörer BACK • Löschen von Text oder Ziffern • Abbrechen eines Vorgangs • Blättern nach oben im Menü • Erhöhen der Lautstärke des Ohrhörers • Öffnen des Anrufprotokolls • Blättern nach unten im Menü • Verringern der Lautstärke des Ohrhörers • Öffnen des Telefonbuchs • Beenden eines Anrufs • Schließen des Menüs/ Beenden eines Vorgangs • Zum Ein-/Ausschalten des Mobilteils gedrückt halten • Senden eines FlashSignals • Eingabe einer Wahlwiederholungsliste • Gedrückt halten, um einen Leerschritt einzugeb
8 • Suchen nach Mobilteilen • Wechseln in den Registrierungsmodus D e u ts ch CD175 Anzeigesymbole Im Standbymodus weisen die Symbole auf dem Hauptbildschirm darauf hin, welche Funktionen auf dem Mobilteil zur Verfügung stehen.
3 Erste Schritte 3 • • Achtung Schließen Sie die Anschlüsse des Telefonkabels wie folgt an: an die Telefonbuchse an der Unterseite der Basisstation; an eine Telefonbuchse in der Wand. •• Stellen Sie sicher, dass Sie die Sicherheitshinweise unter “Wichtig” lesen, bevor Sie das Mobilteil anschließen und installieren. Anschließen der Basis- bzw.
Überprüfen des Akkuladezustands D e u ts ch a Die Akkus sind im Mobilteil vorinstalliert. Ziehen Sie das Klebeband von der Akkuabdeckung ab, bevor Sie die Akkus aufladen. Das Akkusymbol zeigt den aktuellen Ladezustand an. Wenn sich das Mobilteil nicht in der Basis- bzw. Ladestation befindet, zeigen die Balken den Akkuladestand an (voll, mittel, niedrig). Wenn sich das Mobilteil auf der Basis- bzw. Ladestation befindet, zeigen die Balken den Ladevorgang an. Das Symbol für einen leeren Akku blinkt.
Festlegen von Datum und Uhrzeit 1 Drücken Sie die Taste MENU. 2 Wählen Sie [UHR & WECKER] > 3 4 5 [DATUM/ZEIT], und bestätigen Sie anschließend mit OK. Geben Sie über die Zifferntasten das Datum ein, und bestätigen Sie mit OK. »» Auf dem Mobilteil wird das Menü für die Zeiteinstellung angezeigt. Geben Sie über die Zifferntasten die Uhrzeit ein. • Wenn die Uhrzeit im 12-StundenFormat angezeigt werden soll, drücken Sie / , um [A.M.] oder [P.M.] auszuwählen. Drücken Sie zur Bestätigung die Taste OK.
Wählen vor dem Verbinden 1 Hinweis •• Wenn die Stromversorgung unterbrochen wird, können mit dem Telefon keine Notruffunktionen verwendet werden. Tipp •• Prüfen Sie die Signalstärke, bevor Sie einen Anruf entgegennehmen oder tätigen. Weitere Informationen erhalten Sie im Abschnitt “Erste Schritte” unter “Prüfen der Signalstärke”.
Wählen einer Nummer aus dem Anrufprotokoll Tipp •• Wenn Sie einen Anruf verpasst haben, wird auf dem Mobilteil eine Benachrichtigung angezeigt. Sie können eine Nummer aus den Protokollen für empfangene oder entgangene Anrufe wählen. Ausschalten des Klingeltons für alle eingehenden Anrufe Tipp •• Weitere Informationen erhalten Sie im Abschnitt “Anrufprotokoll” unter “Zurückrufen einer Nummer”.
Hinweis •• Dieser Dienst ist vom Telefonnetz abhängig. 1 2 Konferenzschaltung mit externen Anrufern D e u ts ch Tätigen eines zweiten Anrufs Hinweis •• Dieser Dienst ist vom Telefonnetz abhängig. Drücken Sie während eines Anrufs auf R. »» Der erste Anrufer wird auf Warten gesetzt. Wählen Sie die zweite Nummer. »» Die auf dem Bildschirm angezeigte Nummer wird gewählt. Informationen zu anfallenden Gebühren erhalten Sie bei Ihrem Dienstanbieter.
5 Intercom- und Konferenzschaltungen Ein Intercom-Anruf ist ein Anruf bei einem anderen Mobilteil, das dieselbe Basisstation nutzt. Bei einer Konferenzschaltung kommunizieren Sie mit einem anderem Mobilteilbenutzer und externen Anrufern. Tätigen eines Anrufs bei einem anderen Mobilteil Während eines Gesprächs Während eines Gesprächs können Sie die Mobilteile wechseln: 1 2 3 Drücken Sie die Taste INT. Der aktuelle Anrufer wird auf Warten gesetzt.
Während eines externen Anrufs 2 3 4 5 Drücken Sie die Taste INT, um einen internen Anruf zu tätigen. »» Die Mobilteile, die für ein IntercomGespräch zur Verfügung stehen, werden angezeigt. D e u ts ch 1 »» Der externe Anrufer wird auf Warten gesetzt. Wählen Sie eine Mobilteilnummer aus, und bestätigen Sie mit OK. »» Das ausgewählte Mobilteil klingelt. Drücken Sie auf dem ausgewählten Mobilteil die Taste . »» Die Intercom-Verbindung wird hergestellt. Halten Sie INT auf dem Mobilteil gedrückt.
6 Text und Zahlen Sie können Text und Zahlen für den Namen des Mobilteils, Telefonbucheinträge und andere Menüelemente eingeben. Eingeben von Text und Zahlen 1 Drücken Sie einmal oder mehrmals auf 2 die alphanumerischen Tasten, um das gewünschte Zeichen auszuwählen. Drücken Sie die Taste BACK, um das Zeichen zu löschen. Drücken Sie / , um den Cursor nach links oder rechts zu bewegen.
Dieses Telefon verfügt über ein Telefonbuch, in dem Sie bis zu 50 Einträge speichern können. Sie können über das Mobilteil auf das Telefonbuch zugreifen. Jeder Eintrag kann einen Namen mit bis zu 12 Zeichen und eine Nummer mit bis zu 24 Zeichen umfassen. Anzeigen des Telefonbuchs Hinweis •• Sie können das Telefonbuch jeweils nur auf 2 Wählen einer Nummer aus dem Telefonbuch 1 Drücken Sie oder MENU > [TELEF. 2 3 einem Mobilteil gleichzeitig anzeigen. 1 2 Drücken Sie oder MENU > [TELEF.
4 Geben Sie die Nummer ein, und bestätigen Sie mit OK. »» Ihr neuer Eintrag wird gespeichert. Tipp •• Halten Sie gedrückt, um einen Leerschritt einzufügen. Hinweis 4 Löschen aller Einträge 1 Drücken Sie die Taste MENU. 2 Wählen Sie [TELEF.BUCH] > [ALLE •• Im Telefonbuch werden nur neue Nummern gespeichert. 3 Tipp •• Weitere Informationen zum Bearbeiten von Name und Nummer finden Sie im Abschnitt zu Text und Zahlen. Bearbeiten eines Eintrags 1 Drücken Sie die Taste MENU. 2 Wählen Sie [TELEF.
Im Anrufprotokoll wird der Anrufverlauf aller entgangenen und empfangenen Gespräche gespeichert. Im Protokoll für die eingehenden Anrufe werden der Name und die Nummer des Anrufers sowie Datum und Uhrzeit des Anrufs gespeichert. Diese Funktion steht zur Verfügung, wenn Sie sich über Ihren Dienstanbieter beim Anrufer-ID-Dienst registriert haben. Das Telefon kann bis zu 10 Anrufeinträge speichern. Das Symbol für die Anrufübersicht auf dem Mobilteil blinkt, wenn entgangene Anrufe gespeichert sind.
9 Wahlwiederholungsliste In der Wahlwiederholungsliste wird der Anrufverlauf der gewählten Nummern gespeichert. Dort finden Sie Name und/oder Nummer für die getätigten Anrufe. Dieses Telefon kann bis zu 5 Wahlwiederholungseinträge speichern. Anzeigen der Wahlwiederholungseinträge Löschen eines Wahlwiederholungseintrags 1 Drücken Sie die Taste REDIAL, um die 2 3 4 Liste der gewählten Anrufe anzuzeigen. Wählen Sie einen Eintrag aus, und bestätigen Sie mit OK.
Passen Sie die Einstellungen des Telefons nach Ihren Wünschen an. Personalisieren der Telefonanzeige Benennen des Mobilteils Der Name des Mobilteils kann aus bis zu 10 Zeichen bestehen. Er wird im Standbymodus auf dem Bildschirm des Mobilteils angezeigt. 1 2 3 4 Drücken Sie die Taste MENU. Wählen Sie [PERS.EINST] > [MOBILT. NAME], und bestätigen Sie anschließend mit OK. Geben Sie den Namen ein bzw. bearbeiten Sie ihn. Um ein Zeichen zu löschen, drücken Sie die Taste BACK.
Festlegen des Tastentons Tastentöne werden ausgegeben, wenn Sie auf dem Mobilteil die Tasten drücken. 1 2 3 Drücken Sie die Taste MENU. Wählen Sie [PERS.EINST] > [MOBILT. TÖNE] > [TASTENTON], und bestätigen Sie anschließend mit OK. Wählen Sie [EIN]/[AUS], und bestätigen Sie anschließend mit OK. »» Die Einstellung wird gespeichert. Einstellen des Docking-Tons Der Docking-Ton ist das akustische Signal, das ausgegeben wird, wenn Sie das Mobilteil auf die Basis- bzw. Ladestation setzen.
Das Telefon unterstützt eine Vielzahl von anrufbezogenen Funktionen, die Ihnen bei der Handhabung und Verwaltung Ihrer Anrufe helfen. Wählmodus eingestellt. Sie können aus drei Optionen wählen: [KURZ], [MITTEL] und [LANG]. Die Anzahl der verfügbaren Optionen unterscheidet sich je nach Land. Weitere Informationen erhalten Sie von Ihrem Dienstanbieter. 1 2 3 Hinweis D e u ts ch 11 Anruffunktionen Drücken Sie die Taste MENU. Wählen Sie [ERW.
Anbietervorwahl Hinweis •• Diese Funktion ist nur für Modelle verfügbar, die die Funktion für die Anbietervorwahl unterstützen. Bei einigen Dienstanbietern ist für Anrufe außerhalb des regionalen Telefonnetzes das Hinzufügen einer Anbietervorwahl erforderlich. Diese Funktion entscheidet automatisch, ob eine Anbietervorwahl erforderlich ist, wenn Sie eine Nummer aus dem Anrufprotokoll für eingehende Anrufe zurückrufen. Tipp •• Die Anbietervorwahl ist 2- oder 3-stellig.
Das Telefon bietet weitere Funktionen, mit denen Sie auch unterwegs organisiert und informiert bleiben. 4 5 Geben Sie eine Weckzeit ein. Drücken Sie zur Bestätigung die Taste OK. »» Die Weckzeit wird gespeichert, und auf dem Bildschirm wird angezeigt. Tipp •• Drücken Sie zu wechseln. Automatische Uhr Hinweis •• Dieser Dienst ist vom Telefonnetz abhängig. Der Dienst synchronisiert das Datum und die Uhrzeit auf dem Telefon automatisch mit dem öffentlichen Telefonnetz.
Tastensperre Sie können die Tasten sperren, um zu vermeiden, dass Sie versehentlich auf Tasten drücken. Sperren der Tastatur 1 Halten Sie im Standbymodus gedrückt. »» Die Tastatur wird gesperrt. Hinweis •• Wenn die Tastatur gesperrt ist, können Sie keine Anrufe tätigen. Sie können weiterhin eingehende Anrufe entgegennehmen. Die Tastatur wird entsperrt, während Sie telefonieren. Nach Beendigung des Gesprächs wird sie wieder gesperrt. Entsperren der Tastatur 1 Halten Sie die Taste gedrückt.
Optimieren der Tonqualität Der Tonmodus XHD (Extreme High Definition) ist eine exklusive Funktion, mit der High-FidelitySignale an das Mobilteil übertragen werden. Auf diese Weise klingen Ihre Telefongespräche besonders natürlich. Im Standbymodus: 1 2 3 2 3 Manuelle Registrierung Wenn die automatische Registrierung fehlschlägt, können Sie das Mobilteil manuell an der Basisstation registrieren. 1 2 Drücken Sie die Taste MENU. Wählen Sie [ERW. EINST] > [XHD SOUND], und bestätigen Sie anschließend mit OK.
Deregistrieren der Mobilteile 1 Wenn zwei Mobilteile dieselbe 2 3 4 5 6 Basisstation nutzen, können Sie die Registrierung eines Mobilteils über ein anderes Mobilteil aufheben. Drücken Sie die Taste MENU. Wählen Sie [ERW. EINST] > [ABMELDEN], und bestätigen Sie anschließend mit OK. Geben Sie die System-PIN ein. (Die voreingestellte PIN lautet 0000.) Drücken Sie die Taste BACK, um die Nummer zu löschen. 3 Drücken Sie zur Bestätigung die Taste OK. »» Alle Einstellungen werden zurückgesetzt.
Hinweis D e u ts ch 14 Anrufbeantworter •• Wenn der Anrufbeantworter eingeschaltet ist, werden Anrufe nach einer bestimmten Anzahl an Klingeltönen (basierend auf der Klingelverzögerungseinstellung) vom Anrufbeantworter übernommen. Hinweis •• Nur verfügbar für CD175. Das Telefon enthält einen Anrufbeantworter, der nicht entgegengenommene Anrufe aufzeichnet. Standardmäßig befindet sich der Anrufbeantworter im Modus [ANTW+AUFNEH.].
Hinweis Hinweis •• Wenn der Speicher voll ist, wechselt der Anrufbeantworter automatisch in den Modus [NUR ANTW.]. Bandansagen Die Bandansage ist die Nachricht, die der Anrufer hört, wenn der Anrufbeantworter das Gespräch entgegennimmt. Der Anrufbeantworter bietet zwei werksseitig aufgenommene Bandansagen bzw. Modi: [ANTW+AUFNEH.] und [NUR ANTW.]. Aufnehmen einer Bandansage •• Stellen Sie sicher, dass Sie nah am Mikrofon sprechen, wenn Sie eine Bandansage aufnehmen.
•• Eine zuvor aufgenommene Bandansage kann nicht gelöscht werden. Eingehende Nachrichten Jede Nachricht kann bis zu drei Minuten lang sein. Wenn Sie neue Nachrichten erhalten haben, blinkt auf dem Anrufbeantworter die Nachrichten-LED, und auf dem Mobilteil wird eine Benachrichtigung angezeigt. • • - Drücken Sie während der ersten Sekunde der aktuellen Nachricht um die vorherige Nachricht wiederzugeben. Zum Vorwärtsspringen: Drücken Sie die Taste , um die nächste Nachricht wiederzugeben.
Einstellen der Klingelverzögerung Sie können festlegen, wie oft das Telefon klingeln soll, bevor der Anrufbeantworter den Anruf entgegennimmt. 1 2 3 1 2 Drücken Sie die Taste MENU. 3 Wählen Sie [ANRUFBEAN.] > [EINSTELLG.] > [KLINGELZAHL], und bestätigen Sie anschließend mit OK. 4 Wählen Sie eine neue Einstellung aus, und bestätigen Sie mit OK. »» Die Einstellung wird gespeichert. Hinweis •• Um diese Funktion nutzen zu können, müssen Sie sicherstellen, dass der Anrufbeantworter aktiviert ist.
Drücken Sie auf eine Taste, um eine Funktion auszuführen. Eine Liste der verfügbaren Funktionen finden Sie in der folgenden Tabelle für den Zugriff von einem entfernten Standort. Hinweis •• Wenn keine Nachricht vorhanden ist, beendet das Telefon die Verbindung automatisch, wenn Sie 8 Sekunden lang keine Taste drücken. LED-Anzeige auf der Basisstation Die nachfolgende Tabelle gibt an, welcher Gerätestatus durch die jeweilige LED-Anzeige angezeigt wird.
15 Standardeinstellungen Sprache* Mobilteilname Datum Datumsformat* Zeit Zeitformat* Wecker Telefonbuch Wahlwiederholungsdauer* Erstes Klingeln* Wählmodus* Vorwahl* Anbietervorwahl* Klingelmelodie des Mobilteils Weckermelodie Lautstärke des Empfängers Klingellautstärke des Mobilteils Tastenpiepton des Mobilteils XHD-Sound Anrufprotokoll für eingehende Anrufe Wahlwiederholungsliste PIN-Code 38 Landesabhängig PHILIPS 01/01/10 TT/MM 00:00 am 24 Stunden Aus Unverändert Landesabhängig Landesabhängig Ton Leer L
Display • Gelbe LCD-Hintergrundbeleuchtung Allgemeine Telefonfunktionen • Namen- und Nummernidentifizierung • Konferenzschaltungen und Sprachnachrichten • Intercom • Maximale Gesprächszeit: 12 Stunden Telefonbuch, Wahlwiederholungsliste und Anrufprotokoll • Telefonbuch mit 50 Einträgen • Wahlwiederholungsliste mit 5 Einträgen • Anrufprotokoll mit 10 Einträgen Akku • GP-Akkus: PH50AAAHC, Größe AAA NiMH 1,2 V, 500 mAh • BYD Company Limited: H-AAA500A-Z, Größe AAA NiMH 1,2 V, 500 mAh Adapter Basis- und Ladesta
17 Häufig gestellte Fragen (FAQ) Auf dem Display werden keine Balken für die Signalstärke angezeigt. •• Das Mobilteil befindet sich außerhalb des Empfangsbereichs. Verwenden Sie es näher an der Basisstation. •• Wenn auf dem Mobilteil [ABGEMELDET!] angezeigt wird, müssen Sie es registrieren. Tipp •• Weitere Informationen erhalten Sie im Bereich “Erweiterte Einstellungen” unter “Registrieren der Mobilteile”.
D e u ts ch ANNEX 1 English Hereby, Philips Consumer Lifestyle, BU P&A, declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Finnish Philips Consumer Lifestyle, BU P&A vakuuttaa täten että tämä laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
0168 © 2009 Koninklijke Philips Electronics N.V. All rights reserved. IFU_CD170-175_38_DE.indd Printed in China 42 IFU_CD170-175_38_DE_V1.