Audio CD Recorder CDR570 • Instructions for use • Mode d'emploi • Instrucciones de manejo ERASE FINALISE SCROLL DISPLAY REM 1 CDR MIN I CD REC OR DER REC 2 3 4 DIGITAL I OPTICAL I ANALOG TIME TRACK 5 CD 6 7 8 TOTAL REM TRACK TIME STEP SOURCE REC TYPE CANCEL MENU RECORD PLAY /PAUSE STOP 9 10 11 PROGRAM RW MANUAL SYNC SCAN SHUFFLE REPEA T TRACK ALL REWIND ON/OFF OPEN/CLOSE Recordable FFWD EASY JOG ERASE ENTER
English CONTENTS Français English ....................................................7 Español Français.................................................27 Español .................................................
LIMITED WARRANTY CD-R PLAYER One Year Free Labor One Year Exchange Warranty on Parts This product must be carried in for repair. WHO IS COVERED? BEFORE REQUESTING SERVICE... You must have proof of purchase to receive warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase. Please check your owner’s manual or our website at WWW.ACDR.Philips.com before requesting service.
GENERAL INFORMATION CAUTION USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERTED. ATTENTION POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND. The set complies with the FCC-Rules, Part 15 and with 21 CFR 1040.
IMPORTANT SAFETY INSTRUCTIONS 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5.
TABLE OF CONTENTS English Table of contents GENERAL INFORMATION AND DISCS Welcome ......................................................................8 About this manual........................................................8 Technical data ..............................................................8 Discs for recording.......................................................9 Discs for playback........................................................9 Maintenance .......................................
GENERAL INFORMATION English Welcome ! Thank you for buying this Philips Compact Disc Recorder. In the 1980s Philips invented a new audio system - the CD. The CD (compact disc) revealed the new dimensions of digital sound and added to the pleasure of audio. Compact-disc technology permits a high contrast in both loud and soft passages, with perfect channel separation. Philips has now further developed compact disc technology and the result is the CD recorder.
Discs for recording Maintenance For recording use, special audio discs must be used (for music only). These discs bear one of the logos as shown below. The text 'DIGITAL AUDIO' is present! For recording, it is very important to use discs that are free of dust and scratches. Your recorder can use two types of discs for recording purposes: - CD-Audio Recordable (CDR) discs: fully recorded and finalized, these discs play on all CD players and recorders.
OPERATING BUTTONS AND CONNECTIONS English 5 4 3 6 7 ERASE FINALIZE SCROLL DISPLAY 8 9 REM 1 2 CDR MINI AUDI O CD RECO RDER 2 DIGITAL I OPTICAL I ANALOG 10 19 REC TIME TRACK 3 5 4 CD 6 7 8 TOTAL REM TRACK TIME 11 12 STEP 9 10 11 12 13 14 15 16 17 18 19 20 + MANUAL SYNC SCAN SHUFFLE REPEAT TRACK ALL PROGRAM RW ON/OFF 1 SOURCE REC TYPE CANCEL MENU/STORE 13 14 15 RECORD PLAY/PA USE REWIND OPEN/CLOSE 16 17 18 STOP FFWD EASY JOG Recordable ENTER L R L R MAINS IN
DISPLAY 1 REM REC 2 DISPLAY messages 3 4 TOTAL REM TIME TRACK 5 TRACK TIME FADE Messages as listed and explained here may appear on the display for your guidance. 6 STEP 7 1 24 23 22 2 3 4 DIGITAL I OPTICAL I ANALOG 5 CD 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 + MANUAL SYNC SCAN SHUFFLE REPEAT TRACK ALL PROGRAM RW 21 20 19 18 17 16 15 14 13 12 11 English DISPLAY indications 8 9 10 1 REM/REC TIME ..........indicates remaining recording time/recording time 2 TRACK ............
DISPLAY English FINALIZED CD ............when trying to record on a finalized CDR or a prerecorded CD UNFINALIZE/ ................when trying to record on a PRESS ENTER finalized CDRW PROF SOURCE ..............when a professional source is connected MENU messages - See Menu mode REM REC Others NO AUDIO TR................when the recorder enters a data track during recording FINALIZE CD ..............laser power calibration performed 96 times, finalize disc INITIALIZING ............
Connections general Analog connections For recording the following inputs are present: - Digital optical input. - Digital coaxial input. - Analog input. Analog connection is required for playback of CDs (use cable 2) and for recording from external analog sources (use cable 1). For playback the following outputs are present: - Digital coaxial output. - Analog output. We advise you to connect these to the CD input on your amplifier.
INSTALLATION English Digital coaxial connections Digital optical connections Digital coaxial connection is only required when you wish to record from a CD player with a digital coaxial output. Digital optical connection is only required when you wish to record from a CD player with a digital optical output.
INSTALLATION Inserting batteries in the remote control English Power supply 1 Plug the power cord supplied into the POWER SUPPLY connector on the CD recorder, then into a wall socket. 2 Press ON/OFF. ➜ The recorder is now in Standby mode. 1 Open the battery compartment cover. 3 Press any key to activate the recorder. 2 Insert 2 batteries “AA” (LR6) UM-3; as supplied as shown. Note: - The CD recorder will automatically adjust to the local mains voltage.
REMOTE CONTROL English Remote control commands SCAN SHUFFLE ABC DEF REPEAT GHI 1 2 3 JKL MN OPQ 4 5 6 RST UVW XYZ 7 8 9 SPACE TRACK INCR. Inserting discs ERASSE FINALIZE SCROLL DISPLAY FADE CDR SCROLL 0 SOURCE REC TYPE CANCEL MENU/STORE RECORD CD REWIND POWER ON/OF F CDR PLAY/PAUSE STO DIGITAL I MINI AUDI O CD RECO RDER OPEN/CLOSE CD FFWD EASY JOG 2 J K ENTER 9 5 6 ; MENU/ STORE PROG.
Remarks about recording Recording modes You will soon discover how easy it is to make your own CDs. Nevertheless, it is advisable to use a CDRW disc for your first try. Your recorder offers several recording modes. • If the disc is a CDRW and is already finalized, you must unfinalize it first. • The recording procedure is the same for CDRs and CDRWs. • If the disc already contains recordings, the CD recorder will automatically search for the end of the last track, so that recording can start from there.
RECORDING Start recording English Autostart recording ERASE FINALIZE SCROLL DISPLAY 1 CDR MINI AUD IO CD RECO RDER 2 ANALOG 3 4 5 6 CD 7 8 SOURCE REC TYPE CANCEL MENU/STORE RECORD PLAY/P AUSE STOP 9 10 11 12 13 14 15 16 RW REWIND ON/OFF OPEN/CLOSE 1 To start recording, press Play on the selected source. ➜ The CD recorder automatically starts to record and d lights continuously. FFWD EASY JOG Recordable ENTER This feature enables you to make fast and easy recordings of a CD.
RECORDING ERASE FINALIZE SCROLL DISPLAY 1 CDR MINI AUD IO CD RECO RDER 2 3 4 ANALOG 5 CD 6 7 8 SOURCE REC TYPE CANCEL MENU/STORE RECORD PLAY/P AUSE English 3 With the recorder stopped, press REC TYPE three times to enter the Manual Record standby mode. ➜ MANUAL starts to flash and the display shows REC MANUAL.
RECORDING English Important: If you want to play the recorded CDR disc on a regular CD player, it must be finalized. See finalizing discs . Finalized CDRW discs play only on CDRW compatible CD players. Finalizing CDR & CDRW discs Finalizing is a simple procedure that is necessary in order to: - be able to play recordings on a CD PLAYER, - avoid further unwanted recordings on a disc, - avoid erasure of tracks on a CDRW. Auto finalizing Auto finalizing is possible when using the MAKE CD recording function .
RECORDING ERASE FINALIZE SCROLL DISPLAY 1 CDR MINI AUD IO CD RECO RDER 2 ANALOG 3 4 5 6 CD 7 8 SOURCE REC TYPE CANCEL MENU/STORE RECORD PLAY/P AUSE STOP 9 10 11 12 13 14 15 16 RW REWIND ON/OFF OPEN/CLOSE FFWD 1 Press ERASE twice. ➜ The display will show the number of tracks and their total playing time. ERASE DISC and PRESS RECORD will light up. EASY JOG Recordable ENTER For unfinalized CDRW discs only. You can erase: - one or more tracks from the end, - the entire disc.
PLAYING Selecting a track when CD play is stopped English Playing a CD ERASE FINALIZE SCROLL DISPLAY 1 Turn the EASY JOG/ENTER key until the required track number appears on the display. 1 CDR MINI AUD IO CD RECO RDER 2 3 4 5 ANALOG 6 7 CD 8 SOURCE REC TYPE CANCEL MENU/STORE RECORD PLAY/P AUSE STOP 9 10 11 12 13 14 15 16 RW REWIND ON/OFF FFWD EASY JOG OPEN/CLOSE Recordable ENTER 1 Press PLAY/PAUSE 2 ; to start CD play.
PLAYING PROGRAMMING 1 Press repeat on the remote control one or more times during CD play. ➜ When REPEAT TRACK lights up, the current track will play repeatedly. When REPEAT ALL lights up, the entire disc or program plays repeatedly. or: Enter a track number with the number keys. For 2-digit numbers, press the keys in rapid succession. ➜ The track will be stored in the program.
MENU MODE English Remarks about Menu mode CDR Text settings Storing names CD 2 J K 9 5 SOURCE REC TYPE CANCEL MENU/STORE RECORD PLAY /PAUSE REWIND 6 1 Select the TEXT EDIT submenu. ➜ TEXT EDIT will appear on the display. STOP FFWD ; MENU/ STORE PROG. ENTER OPEN/CLOSE 2 Press EASY JOG/ENTER or ENTER on the remote control to confirm. EASY JOG CANCEL ENTER 3 Rotate EASY JOG/ENTER to select the required option in the submenu: CD Artist, CD Title, Track 1 Artist, Track 1 Title, etc.
MENU MODE Recording settings English 4 Press EASY JOG/ENTER or ENTER on the remote control to confirm. ➜ The display will ask you to reconfirm your selection. Auto track increment 5 Press EASY JOG/ENTER or ENTER on the remote control to reconfirm. 1 Select the AUTO TRACKING sub menu. ➜ AUTO TRACK will appear on the display. 6 Press STORE/MENU to return to the submenu or STOP 9 to exit. 2 Press EASY JOG/ENTER or ENTER on the remote control to confirm.
FIXING PROBLEMS English TROUBLE-SHOOTING If your CD recorder is defective, it is wise to check this list first. You may have forgotten a simple step. Warning! Under no circumstances should you attempt to repair the CD recorder yourself because this will invalidate the guarantee.
The products and services described herein are not necessarily available in all contries. The specifications and design of this product are subject of change without notice. Printed in Hungary. © PHILIPS 1999 http://www.philips.com All trademarks acknowledged. 3104 125 2280.
