Always there to help you Register your product and get support at www.philips.
1 Safety 2 11 Reset the system 16 2 Your car audio system 3 3 3 4 12 Product information 17 17 13 Troubleshooting 18 6 7 8 9 14 Notice 19 19 19 19 19 Introduction What's in the box Overview of the system 3 Install the car audio system Connect wires Mount into the dashboard Attach the front panel 4 Get started 10 10 10 10 5 Listen to radio 10 10 10 11 11 11 6 Play from a storage device 12 7 Use Bluetooth devices 13 13 14 14 8 Listen to an external device 15 9 Charge your USB device
1 Safety Read and understand all instructions before you use this device. If damage is caused by failure to follow instructions, the warranty does not apply. • Modification of the product could result in hazardous radiation of EMC or other unsafe operation. • The device is designed for negative ground (earth) 12 V DC operation only. • To ensure safe driving, adjust the volume to a safe and comfortable level. • Improper fuses can cause damage or fire. When you need to change the fuse, consult a professional.
Introduction With this system, you can: • enjoy audio from USB storage devices, SD/ SDHC card, and other external players, and Bluetooth device. • listen to radio stations. You can enrich sound output with these sound effects: • Dynamic bass boost (DBB) • Digital sound control (DSC) Playable media: • USB storage device • Compatibility: USB 2.0, USB 1.
Overview of the system a b t s r q c p o d l k j i h g n m u a b Unlock the front panel. • • For .wma and .mp3 tracks, press to select the previous folder. Press and hold to access the system menu. Press to select a tuner band. • Return to the previous menu. • c d LCD screen 4 EN f v e • e • Connect to a USB storage device. f AUDIO IN • Connect to the audio output socket (usually the headphone socket) of an external device. g • • Start, pause, or resume the play of tracks.
In radio mode, press and hold to store the current radio station at channel No. 6. • In radio mode, press to select the preset radio station of No. 5. In radio mode, press and hold to store the current radio station at channel No. 5. • • i • • • j • • • k • • • l • • In radio mode, press to select the preset radio station of No. 4. In radio mode, press and hold to store the current radio station at channel No. 4. For .wma and .
s t • • Press to enable or disable the maximum volume. Press and hold to enable or disable the DBB (dynamic bass boost) sound effect. • • / Press to hang up a call. Press and hold to reject an incoming call. u Slot for SD/SDHC card • Insert an SD/SDHC card. v RESET • Press to reset the system to factory default settings. 3 Install the car audio system Caution •• Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence.
Yellow strip To the +12V car battery which is energized at all times Note •• Make sure that all loose leads are insulated with electrical tape. •• Consult a professional to connect wires as instructed 2 below. English i Connect wires Connect the antenna and amplifier as illustrated, if applicable. e 1 Check the car's wiring carefully and connect them to the the ISO male connectors.
Mount into the dashboard • 1 18 53.5 mm • If the car does not have an on-board drive or navigation computer, disconnect the negative terminal of the car battery. If the car battery is not disconnected, to avoid short-circuit, make sure that the bare wires do not touch each other. 3m m Make sure that the car dashboard opening is within these measurements: m 5m Slide the unit into the dashboard until you hear a "click". 5 Attach the trim plate.
Reconnect the negative terminal of the car battery. Detach the front panel English 6 Note Attach the front panel •• Before you insert an SD/SDHC card or reset the 1 •• Before you detach the front panel, make sure that the Insert the notch on the front panel to the chassis on the main unit. system, detach the front panel. system is turned off. 1 2 2 Press to release the front panel. Pull the front panel outwards to remove it.
4 Get started 5 Listen to radio For the first time use Select a tuner region 1 You can select a radio region that matches your location. Press to turn on the system. »» [PHILIPS] is displayed and the device turns to radio mode automatically. Set the clock 1 Press and hold menu. 2 Press / repeatedly until [CLK] is displayed with time digits blinking. 3 4 Rotate anti-clockwise to set the hour. Rotate clockwise to set the minute. Press AS/SOURCE repeatedly to select a source.
Note •• The RDS function is enabled by default. •• Only when the RDS function is enabled, RDS related settings can be accessed. 1 Press and hold menu. 2 Press / repeatedly until [RDS ON] or [RDS OFF] is displayed. 3 Rotate to select [RDS ON]. »» The RDS function is enabled. • To disable the RDS function, rotate to select [RDS OFF]. Store radio stations automatically 1 2 Switch the source to [RADIO]. 3 Press and hold AS/SOURCE until [STORE---] is displayed.
6 Play from a storage device 3 If the play does not start, press Button / / / /DISP 1 Connect a compatible USB storage device or SD/SDHC card. • For an SD/SDHC card, detach the front panel first, insert the card into the card slot, and then attach the front panel. 2 Switch the source to [USB] or [SD/ SDHC]. • When a USB storage device is connected and recognized, the system switches the source to [USB] automatically. 12 EN . Function Press repeatedly to select a folder. Pause or resume play.
7 Use Bluetooth devices English »» If the connection fails, [FAILED] is displayed on the LCD screen of this system. Disconnect a device With this car audio system, you can listen to audio from a player or make a call through Bluetooth. 1 Press and hold MENU to access the system menu. 2 Press / repeatedly until [DISCONN] is displayed. Connect a device 3 Press . »» [WAIT] is displayed with -, --, and --- blinking alternately until [DISCNN OK] scrolls.
Tip •• You can also complete the reconnection on your device. Pick up an incoming call When the system receives an incoming call, the phone number or [PHONE IN] is displayed. Press Play audio from a Bluetooth device If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to tracks that are stored on the device through the system.
9 Charge your USB device You can use the system to amplify the audio input from an external device, for example, MP3 player. You can charge your USB device, for example, smart phone, with this product. English 8 Listen to an external device Note •• The output voltage through the USB socket is 5 V with output currency 0.5 A. AUDIO-IN Connect your USB device to this product with USB cable. Once the USB device is connected and recognized, it begins to charge automatically.
10 Adjust sound 11 Reset the system The following operations are applicable to all supported media. Button Function Rotate to increase or decrease the volume level. Press to mute the speakers or release them from mute status. Press to enable or disable the maximum volume. Press and hold to enable or disable the Dynamic Bass Boost (DBB) effect. Press repeatedly to select a sound equalizer. 1 Press and hold to activate the setup of customized sound equalizer.
Usable sensitivity AM(MW) (S/N = 20 dB) 30 µV English 12 Product information Bluetooth Note •• Product information is subject to change without prior notice. Product Information General Power supply Fuse Suitable speaker impedance Maximum power output Continuous power output Pre-Amp output voltage Aux-in level Dimension (Wx H x D) Weight 12 V DC (11 V - 16 V), negative ground 15 A 4-8 50 W x 4 22 W x 4 RMS (4 10% T.H.D.) 2.5 V 500 mV 188 x 58 x 110 (mm) 0.
Unsupported formats: • Empty albums: an empty album is an album that does not contain MP3/ WMA files, and is not be shown in the display. • Unsupported file formats are skipped. For example, Word documents (.doc) or MP3 files with extension .dlf are ignored and not played. • AAC, WAV, PCM audio files • DRM protected WMA files (.wav, .m4a, .m4p, .mp4, .aac) • WMA files in Lossless format 13 Troubleshooting Warning •• Never remove the casing of this product.
Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the user’s authority to operate the equipment. Compliance This product complies with the radio interference requirements of the European Community. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.
Specifications are subject to change without notice © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. CE135BT_10_UM_V1.