operation manual

20 EN
3 Tap an icon, for example, , of which you want to
assign the function to a button on the steering wheel.
• To cancel the assignment, tap [Cancel].
4 Press and hold the button on the steering wheel for
one second.
» The following interface is displayed.
5 Repeat steps 3 and 4 to assign more functions to
buttons on the steering wheel.
• To clear the assignment, tap [Clear all].
Set the rear view camera
If a rear view camera is connected, you can view on the
screen what the camera takes.
1 Tap > to access the full menu with all feature
icons displayed.
2 Tap (the icon is displayed only when a compatible
camera is correctly connected).
» Picture from rear camera is displayed.
Reset the system
If the system hangs up, reset it.
1 Flip up the protective cover.
2 Press RESET with the tip of a ball-point pen or
toothpick.
12 Productinformation
Note
•
Product information is subject to change without prior
notice.
General
Power supply 12 V DC (11 V - 16 V), negative
ground
Fuse 15 A
Suitable speaker
impedance
4 - 8
Maximum power output 45 W x 4 channels
Continuous power
output
24 W x 4 channels (4
10%
T.H.D.)
Pre-Amp output voltage 4.0 V (CD play mode; 1 kHz, 0
dB, 10 k
load)
Sub-woofer output
voltage
4.0 V (CD play mode, 61 Hz, 0
dB, 10 k
load)
Aux-in level
800 mV
Dimensions
(W x H x D) 178 x 101.5 x 160 mm
Weight (main unit) 3.1 kg