Register your product and get support at www.philips.
1 Important Safety Notice 2 Your in-car entertainment system Introduction What's in the box Overview of the main unit Overview of the remote control 3 Get started Install the car audio Mount into the dashboard Attach the front panel Install remote control battery Turn on Set date and time 4 Play audio/video/picture Load discs Connect USB device Insert SD card Play/Pause Browse Select audio track Select subtitle language Change view angle Repeat one/all chapter Random play Select audio mode View photo 5
Reset Replace fuse 13 Product information Playability information 14 Troubleshooting About the Bluetooth device 4 EN 37 37 38 39 40 40
Safety Notice Read and understand all instructions before you use the device. If damage is caused by failure to follow instructions, the warranty does not apply. Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. The device is designed for negative ground (earth) 12 V DC operation only. not watch video when driving.
Recycling ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary $ % & * % ® device that plays DivX video. Visit divx.com for more information and software & * ABOUT DIVX VIDEO-ON-DEMAND:This DivX % ® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies.To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.
2 Your in-car entertainment system E n g lis h The correct disposal of these products helps prevent potentially negative consequences on the environment and human health. Your product contains batteries, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate collection of batteries. The correct disposal of batteries helps prevent potentially negative consequences on the environment and human health. Please visit www.recycle.philips.
f Audio and Video cable What's in the box g Hexagon head screw Check and identify the contents of your package: h Screws - M4x8mm (x4) a i Remote control battery b j Rubber cushion k User manual l Quick start guide c d e f g h i j k l a Main unit and front panel (with a sleeve) b Remote control c Trim plate d Carrying case for front panel e ISO standard connector 8 EN
E n g lis h Overview of the main unit ab c d e g f h i j k o n m l q a OPEN Open/Close TFT screen. b Press to answer a call. Press and hold to transfer call. c / Turn the unit on or off. % " Mute or unmute sound. Rotate to adjust volume. d BAND Select tuner band. p e +/-PRESET Select preset radio station. Search for track/folder. f DISP Adjust dimmer settings. Press and hold to turn off TFT display. g TILT Adjust position of the screen.
j AV IN External audio/video socket. k Overview of the remote control Unlock the panel. a b c d l USB socket. m SOURCE Select source. n Press to terminate call. o e ~ } | f g h i { / Tune for radio station. Skip/search for track. Fast backward/forward playback. z y j k x l p RESET Reset the unit when it hangs up. w v u m n q SD/SDHC card slot t o s p r q a Turn the unit on or off. b NAVI Enter GPS navigation system. c SOURCE Select source.
Turn maximizing sound on or off. i DVD MENU Access DVD main menu. / Skip to previous/next track/chapter. Move cursor to left/right. E n g lis h x h y Turn TFT on or off. j Turn full sound on or off. z DVD AUDIO Select audio language or audio channel. Return to previous menu or exit. { TOP MENU Return to top menu. k l DBB Turn Dynamic Bass Boost (DBB) sound on or off. | TILT +/ Adjust position of the screen. m EQ Access audio setting menu.
3 Get started Caution Notes on speaker connection Never connect speaker wires to the metal body or chassis of the car. Never connect speaker wires with stripes to one another. Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. Install the car audio Connect wires Caution Ensure that all loose leads are insulated with electrical tape.
5 6 7 8 2 Connect to Red wire The +12V power terminal which is live in the accessory (ACC) position of the ignition switch. If there is no accessory position, connect to the +12V car battery terminal that is always live.
22 21 20 1 5 6 2 3 4 14 8 7 EN 9 0! " § $ % & / 18 19
Connect to/with Extension wire Parking brake (-) 3 4 5 6 7 8 Pink wire Extension wire (not included) Brake switch Ground Purple wire Gearbox switch Reverse gear signal ISO wires 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Yellow cable Red cable White cable Red cable White cable Red cable White cable Yellow cable Brown cable Blue cable White wire Black wire Black wire Black wire 2 Reverse camera (B+) Black lamp lead + Connected in step 1 above Video out Rear line out (Right) Rear line out (Left) Front lin
4 5 Place the supplied rubber cushion over the end of the mounting bolt. Install the sleeve into the dashboard and = Z Slide the unit into the dashboard until you hear a click. Attach the front panel 1 Attach the trim plate. 2 Insert the left side of the panel in the chassis until it is correctly engaged. 3 Press the right side of the panel until the mechanism locks it into place.
Open the battery compartment. 2 Insert one CR2025 battery with correct polarity (+/-) as indicated. 3 Close the battery compartment. 2 = » The OSD language is changed to the selected language immediately. 3 = » The OSD region is changed to the selected radio region immediately. 4 ] E n g lis h 1 Turn on Caution Risk of road accidents! Never watch videos or adjust settings while you drive. 1 Press to turn the unit on.
2 Tap to display the full menu. 4 Play audio/ video/picture Load discs 3 4 Tap . » The setup menu is displayed. & = = = » The date/time setup menu is displayed. You can play video, audio or images stored on the following discs: DVD video, DVD-R, DVD-RW VCD Audio CD, CD-R, CD-RW 1 Insert the disc into the disc slot with label side facing up. » The disc starts playing automatically. 2 To remove the disc, press the button.
Supported DVD region code 3 China To remove the USB device, switch the car " take off the USB device. » When USB device is disconnected, it plays the previous source. ; # = ^ Insert SD card Latin America Note This device supports Secure Digital High Capacity Russia, India Connect USB device (SDHC) card. 1 Detach the front panel. (see 'Detach the front panel' on page 39) 2 Insert the SD card into SD card slot. » Play starts automatically.
4 5 Play/Pause $ Tap on the name to start play. Select audio track For video discs that contain two or more audio tracks. 1 2 To pause, tap . To resume play, tap 1 During play, tap anywhere except for the upper left corner to display the control bar. 2 Tap repeatedly to select audio track. » The audio channel information is displayed on upper line of the screen. again. To skip forward/backward, tap .
During play, you can select different repeat play modes. For DVD/VCD movie disc: 1 Tap anywhere except for the upper left corner to display the control bar. 2 3 Tap 2 Tap repeatedly until the preferred audio mode is selected. E n g lis h Repeat one/all chapter View photo 1 Tap . » Thumbnail view of the pictures is displayed. 2 Drag the bar downward to view all pictures. 3 Tap on a picture to view it in full screen. to display the second menu.
5 Listen to radio Zoom You can zoom in pictures for a close view. 1 During view pictures, tap anywhere except for the upper left corner to display the control bar. 2 Tap repeatedly to zoom in/out the picture. Rotate pictures 1 During view pictures, tap anywhere except for the upper left corner to display the control bar. 2 Tap Tune to a radio station 1 2 Tap to display home menu. Tap . » Band and frequency information is displayed. repeatedly to rotate the picture.
Tune to a preset station 1 2 E n g lis h [Local]: only stations with strong signals can be broadcast. Select band. Tap one of the preset channels (1 to 6) to select a preset station. Store radio stations in memory You can store up to 6 stations in each band. Store stations manually 1 2 3 Select band. Tune to the station by tapping or . Tap and hold one of the channels 1 to 6 over two seconds. » The station is saved under the selected channel.
6 Play with RDS The RDS (Radio Data System) function operates only in areas with FM stations broadcasting RDS signals. If you tune to an RDS station, an RDS icon and the station name are displayed. Turn on RDS 1 Under radio mode, tap . » The radio option menu is displayed. 2 Tap [On] to turn on the RDS function. 3 RDS program types Item Select program type Before tuning to RDS stations, you can select program type and let the unit search only for programs of the selected category.
RELIGION PHONE IN TRAVEL LEISURE JAZZ COUNTRY NATION M OLDIES FOLK M DOCUMENT TEST ALARM Religion Phone In Travel Leisure Jazz Music Country Music National Music Oldies Music Folk Music Documentary Alarm Test Alarm Activate AF/TA functions 7 Use navigation system E n g lis h 20 21 22 23 24 25 26 27 28 29 30 31 Insert map card Note Navigation map card is not included in the packaging of the car entertainment system. 1 2 3 Press OPEN to release the panel. Open the card door under the screen.
8 Play with Bluetooth device 6 Enter default password "0000" in your device. » iI the pairing succeeds. the phone call record is displayed. You can make or receive phone calls with Bluetooth-enabled phones through the unit. You can also listen to music from a Bluetoothenabled device. Pair the Bluetooth-enabled devices To connect your Bluetooth device to the unit, you need to pair the device to the unit. Pairing needs only to be done once. You can pair up to eight devices.
Tap on one device that you want to reconnect/disconnect. Tap (green) to reconnect the selected device. Tap (red) to disconnect the selected device. Tap Tap to clear all input. to go back to previous screen. 3 Tap 4 During talking, tap E n g lis h 3 to start calling. Tip If the Bluetooth device is paired, under disconnect on top of the screen into the Bluetooth/ mode, tap paired device list.
Tip You can also press Tip / on front panel to answer/ You can enter desired name/number on the keypad to search quickly. terminate the call. Switch phone call to mobile phone If you do not want your passenger to hear your incoming call, you can switch the call the mobile phone. During talking, tap . » The voice is transferred from the loudspeaker to the mobile phone. Favorite call You can make a favorite call from the favorite call list. 1 Tap on top of screen. » The dial screen is displayed.
2 9 Play iPod E n g lis h [Display Design]: change the background. Tap an option to change the setting. Compatible iPod/iPhone Listen to music from Bluetooth device If the connected Bluetooth device supports ; ; & # ;&#} you can listen to the music stored on the device through the unit. If the device also supports ; $ " % # ;$%#} its remote control to play music stored on the device.
1 Connect your iPod/iPhone to the front USB socket via Apple's own 30pin USB cable. » Music playback starts. 2 3 4 Tap _ Tap on the screen to select desired song. Tap on the selected song to play. Charge the iPod/iPhone When the iPod/iPhone is connected to the car audio system, the iPod/iPhone begins to charge. Tip For certain iPod models, it may take up to one minute before the charging indication is displayed. 2 3 4 5 To pause/resume play, tap . To skip a track, tap / .
3 Adjust EQ settings by tapping on the screen. [Bass] bass range: -14 to +14. [Middle] middle range: -14 to +14. [Treble] treble range: -14 to +14. [LPF] = ` 160. [MPF] " ` ^ 1.0KHz, 1.5KHz, 2.5KHz. [HPF] ` ^ 12.5KHz, 15.0KHz, 17.5KHz. 4 ? = sound settings, tap to restore default settings.
Turn FullSound on/off [Subwoofer]: tap [On]/[Off] on screen to turn the subwoofer on or off. Tap or to select subwoofer volume: 0 to 12. [LPF]: tap screen to select subwoofer = ` 5 Tap to exit. Philips FullSound restores the audio details that is lost in music compression. It enriches the music signal, so what you hear is the full sound with every nuance of emotion and every detail of musical genius.
11 Adjust settings When DBB (Dynamic Bass Boost) is activated, low tones will be enhanced electronically. Tap on the upper line of screen to toggle between the settings. (red): DBB (Dynamic Bass Boost) function is activated. (gray): DBB (Dynamic Bass Boost) function is deactivated. Display system setup menu E n g lis h Turn DBB on/off 1 Tap 2 Tap . » The settings menu is displayed. > to display the full menu. Adjust general settings 1 Tap 2 Drag the bar downward to view all settings.
General settings [Radio Region] Options [Beep] [On] [Off] [Language] [Calibration] [Clock Mode] [Date] [Time] [Parking] [12Hr]/[24Hr] [On] [Off] [Camera] [PAL/NTSC] [Demo] [On] [Off] 4 Tap 34 EN to exit. Description Select one that matches your location. Turn the beep sound on. Each time you press a button, the unit beeps. Turn off the beep sound. Select OSD (on screen display) language. Calibrate the touch screen. Select time format. Set date. Set time. Turn parking on. Turn parking off.
Options Description [On] Turn the navigation on. Turn the navigation off. Access the Navigation Program Path mode. Turn the navigation voice on. Turn the navigation voice off. Select the navigation voice to high. Select the navigation voice to low. [Off] [Navigation Program Path] [Navigation Voice] [On] [Off] [Navigation Voice Gain] [High] [Low] 3 Tap Bluetooth settings [New Pairing] [Auto Connect] Options Pair new device. [On] [Off] [Auto Answer] [On] [Off] [Pin Code] to exit.
12 Others 1 In any mode, tap . » The option menu is displayed. 2 Tap [Display Design] to set the options. Adjust brightness 1 Press DISP on front panel repeatedly to adjust the dimmer settings. 2 Press and hold DISP to turn off the display, press again or tap on TFT screen to switch on. [Wallpaper]: tap to change wallpaper on screen. [Visualizer]: tap to change visualizer on screen. [Skin]: tap to change OSD display color. [Backlight]: tap to change main unit button illumination color.
Operate the connected the device (see instruction manual of the device). E n g lis h 4 Tip If you connect the system to other audio devices through the REAR OUT L/R connector (see "Wiring Diagram" section), tap [AV-IN2] to listen to that device. Detach the front panel You can detach the front panel to deter theft. 1 2 Press OPEN to release the panel. Push the right side of the panel leftward. Tip When the unit is reset, all the settings remain unchanged.
13 Product information Note Product information is subject to change without prior notice. FUSE (15A) General Power supply Tip If the fuse breaks immediately after it has been replaced, there may be an internal malfunction. In this case, consult your Philips dealer.
Radio Frequency range - FM Frequency range AM(MW) Usable sensitivity - FM Usable sensitivity - AM (MW) 87.5 - 108.0 MHz (50kHz per step) 522 - 1620 KHz (9kHz per step) 5 uV 25 uV LCD Screen size Display resolution Contrast ratio Brightness 7.0 inches 800 x 480 dots 500 450 cd/m2 Bluetooth Communication system Output Maximum communication range Frequency band Compatible Bluetooth Supported codecs Receive Transmit Bluetooth Standard version 2.
14 Troubleshooting Warning % Disc region code is not compatible with the unit. Use disc with proper region code. No image % Parking wire connection is incorrect. Check the wiring. Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/welcome).
E n g lis h << . > << >. \ . . . ! % required for the system. % The Bluetooth function of the device is not enabled. Refer to the user manual of = function. % The system is not in the pairing mode. % The system is already connected with another Bluetooth-enabled device. Disconnect that device or all other connected devices and then try again. The paired mobile phone connects and > << >. > < . <.
Specifications are subject to change without notice _ "## ` < <{ |{ } ~ >. < > ;!! * .
