Register your product and get support at www.philips.
7 Adjust sound 1 Important 4 Safety Notice 4 4 2 Your car audio system Introduction What’s in the box Overview of the main unit Overview of the remote control 3 Get started Install the car audio Install remote control battery Turn on Select country/region Set clock 4 Listen to radio Tune to a radio station Store radio stations in memory Store stations manually Tune to a preset station 5 Play with RDS Turn on RDS Select program type Select alternate frequencies Receive traffic announcement Set RDS clo
1 Important Notice Safety • • • • • • • • • • • • Read and understand all instructions before you use your apparatus. If damage is caused by failure to follow instructions, the warranty does not apply. This apparatus is designed for negative ground (earth) 12 V DC operation only. To ensure safe driving, adjust the volume to a safe and comfortable level. Improper fuses can cause damage or fire. When you need to change the fuse, consult a professional.
This product complies with the radio interference requirements of the European Community. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company.
a c b d h g f i 6 e j EN k
a b n m c d e l k f j i p a DBB • Turn on or off Dynamic Bass Boost (DBB) sound. Unlock the panel. h g o c b • English Overview of the main unit / • • • Select tuner band. Select MP3/WMA folder. Scroll up/down menu. • • • • /OK/MUTE Turn the unit on or off. Confirm selection. Mute or unmute sound. Rotate to adjust volume.
e • Return to previous menu. • Eject disc. f Overview of the remote control i j g MP3 LINK • Connect external audio device. h +SONG/FOLDER • Select preset radio station. • Search for track/folder. i OPTIONS/CLOCK • Access option menu. • View clock. j / • • • Tune for radio station. Skip/search for track. Fast backward/forward playback. k DISP • Display current status. h k g f e d l m OK n c PRESET b OP T OPTIONS a FOLDER SONG CLOCK DISPLAY PRESET l MENU • Access system menu.
• • i /PWR/ Turn the unit on or off. Mute or restore volume. 3 Get started English h / • • • Select tuner band. Scroll up/down menu. Select MP3/WMA folder. • Return to previous menu. j Caution • Use the controls only as stated in this user manual. m EQ • Select equalizer (EQ) settings. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of your apparatus.
Note on the power supply lead (yellow) • When you connect other devices to this apparatus, ensure that the rating of the car circuit is higher than the total fuse value of all the connected devices. 3 Connect the antenna and amplifier as illustrated, if applicable. You can connect the car audio to the amplifier through RCA-TO-RCA cables (not supplied). Notes on speaker connection • Never connect speaker wires to the metal body or chassis of the car.
3 Connector ANTENNA REAR LINE OUT R REAR LINE OUT L 4 Connect to Antenna Rear right speaker Connect the supplied standard connector to the unit. Rear left speaker a a b c b c a a b b d Tip d • The pin arrangement for the ISO connectors e g f c c d d depends on the type of vehicle you drive. Be sure to make proper connections to prevent damage to the unit. h Mount into the dashboard 2 Cut off the bigger end of the supplied standard connector.
2 Ensure that car dashboard opening is within these measurements: 4 Remove the mounting sleeve with the supplied disassembly tools. 5 Install the sleeve into the dashboard and bend the tabs outward to fix the sleeve. m 5m mm 53.5mm 183 Note • If the unit is not fixed by sleeve but by the 3 Remove the two screws on the top of the unit. supplied screws, skip this step.
7 Place the supplied rubber cushion over the end of the mounting bolt. Slide the unit into the dashboard until you hear a click sound. 5m Attach the front panel 1 Attach the trim plate. 2 Insert the right side of the panel in the chassis until it is correctly engaged. 3 Press the left side of the panel until the mechanism locks it into place. English 6 m Install remote control battery Caution • Risk of explosion! Keep batteries away from 8 Reconnect the negative terminal of the car battery.
For first-time use: 1 2 Rotate to select an option: • [USA] (United States) • [Latin] (Latin America) • [Europe] (Western Europe) • [ASIA] (Asia Pacific) • [Mid-East ] (Middle East) • [Russia] (Russia) 3 Press Remove the protective tab to activate the remote control battery. To replace the remote control battery: 1 2 Open the battery compartment. 3 Close the battery compartment. Insert one CR2025 battery with correct polarity (+/-) as indicated. to confirm. Set clock 1 2 Press MENU.
Tune to a radio station 1 Press SOURCE repeatedly to select Tuner. 2 Press or to select band: [FM1], [FM2], [FM3], [AM1], or [AM2] . 3 Press or to tune to a radio station manually. » The radio station is broadcast. Store radio stations in memory You can store up to 6 stations in each band. Store stations automatically 1 » To search for a radio station automatically, press or for over 3 seconds. Select tuner region You can select suitable country/region of the radio.
5 Play with RDS Item 1 2 The RDS (Radio Data System) function operates only in areas with FM stations broadcasting RDS signals. If you tune to an RDS station, an RDS icon and information about the presenter, station or program is displayed. 3 4 5 6 Turn on RDS 7 Note 8 9 • The default setting for RDS is off. 1 2 10 11 12 13 14 15 Press MENU for 3 seconds. Rotate to select RDS ON: » The RDS function is turned on.
• If the radio signal is poor, turn on AF (Alternate Frequency) to search for another station with stronger signal. 1 2 Press MENU or OPTIONS. 3 Rotate to select a setting: • [AF ON]: Turn on the AF mode. • [AF OFF]: Turn off the AF mode. Press or displayed. repeatedly until [AF] is Set region for AF tuning You can define AF tuning region: [REG ON] Only stations in current region can be tuned to automatically. [REG OFF] All stations can be tuned to automatically. 1 2 Press MENU.
6 Play audio files Search for an MP3/WMA track Search within the current folder Note • Ensure that the disc or device contains playable 1 Press +SONG. » The name of the current track is displayed. 2 Turn to select anther track in current folder 3 Press files. Play a disc to confirm. Search in other folder Note 1 Press FOLDER -. » The name of the current folder is displayed. 2 3 4 5 Rotate • You cannot play CDs encoded with copyright protection technologies.
• • Rotate to select a setting. [RPT TRK] (repeat one track): play current track repeatedly. [RPT DIR] (repeat a folder): play all tracks in the current folder repeatedly. [RPT ALL] (repeat all tracks): play all tracks repeatedly. Shuffle play 7 Adjust sound English 2 • Adjust volume 1 Turn clockwise/anticlockwise to increase/decrease volume. Mute You can play the tracks in random order: 1 During play, press OPTIONS repeatedly until [SHUF] is displayed.
Other sound settings You can also adjust the preset EQ/Audio settings. 1 2 3 Press EQ/Audio for 3 seconds. Press or repeatedly to select the item to be adjusted: • [BAS] (bass) range: -7 to +7. • [TRE] (treble) range: -7 to +7. • [BAL] (balance) range: 12L to 12R. (L = left speaker, R = right speaker) • [FAD] (fader) range: 12R to 12F. (R = rear speaker, F = front speaker) Rotate to select a value.
Reset You can set the screen to turn off automatically after the unit is idle for 10 or 20 seconds. You can reset the unit to its default setting. 1 2 3 Press MENU. Rotate to select a setting: • [BKO 10 S] : Turn off the screen automatically 10 seconds after last operation. • [BKO 20 S] : Turn off the screen automatically 20 seconds after last operation. • [BKO OFF] : Never turn off the screen. Press 1 2 English Select blackout setting Detach the front panel.
9 Additional information Detach the front panel You can detach the front panel to deter theft. 1 2 Press to release the panel. Push the left side of the panel rightward. Note • If the new fuse gets damaged again, there may be an internal malfunction. Consult your Philips dealer. Remove the unit You can remove the unit from the dashboard. 1 2 3 Pull the panel towards you to disengage it from the chassis. 4 Store the panel in the supplied carrying case to protect it from dirt or damage.
Note • Product information is subject to change without prior notice. Power supply Fuse Suitable speaker impedance Maximum power output Continuous power output Pre-Amp output voltage Aux-in level Dimensions (W x H x D) Weight 12 V DC (11 V 16 V), negative ground 15 A 4-8 45 W x 4 channels 22 W x 4 RMS (4 10% T.H.D.) 2.5V 500 mV 188 x 58 x 201 mm 1.47 kg Radio Frequency range FM Frequency range AM (MW) Usable sensitivity FM Usable sensitivity AM (MW) (S/N = 20 dB) 65.0 - 74.0 MHz 87.5 - 108.
11 Troubleshooting Caution • Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www.philips.com/support). When you contact Philips, ensure that your apparatus is nearby and the model number and serial number are available. No power or no sound. • Car engine is not on.
© 2010 Koninklijke Philips Electronics N.V. All rights reserved. CEM1000_51_UM_V1.
