operation manual

13EN
Receive trafc announcement
If you do not want to miss trafc announcement
when enjoying music, turn on the TA (Trafc
Announcement) function.
1 Press and hold .
2 Press or repeatedly until [TA] is
displayed.
3 Rotate to select a setting.
• [TA ON]: when there is trafc
announcement, the unit switches to
the tuner mode (regardless of the
current mode) and begins to broadcast
the trafc conditions. When the trafc
announcement is over, it returns to the
previous mode.
• [TA OFF]: trafc announcement does
not cut in.
Note
•
If the current received TA signal remains weak for
over 120 seconds, the unit will activate TA Seek mode
automatically. The TA Seek will seek for other station
with good condition of TA signal.
Tip
•
When a trafc announcement cuts in, user can press
to terminate the trafc announcement, and the unit will
resume to previous playback mode.
Set RDS clock
You can use time signal that is broadcast
together with the RDS signal to set the clock of
the unit automatically.
1 Press and hold .
2 Press or repeatedly until [CT] is
displayed.
3 Rotate to select a setting:
• [CT ON]: Turn on the RDS clock. Time
shown on the unit synchronizes with
that on the RDS station.
• [CT OFF]: Turn off the RDS clock.
Tip
•
The accuracy of the transmitted time depends on the
RDS station that transmits the time signal.
6 Play from hard
media
You can use this system to listen to audios that
are stored on a compatible disc or USB storage
device.
Play a disc
Note
•
You cannot play a CD encoded with copyright
protection technologies.
• Ensure that the disc contains playable content.
Insert a CD with the printed side facing up.
» Play starts automatically.
• To pause CD play, press
.
• To resume CD play, press
again.
• To skip to the previous/next track, press
or .
• To search backward/forward rapidly within
the current track, press and hold
or
.
• To eject the CD, press
on the front panel.
Tip
•
If the disc is blocked in the disc compartment, press and
hold
until the disc comes out.