User Manual
Table Of Contents
- 1. Why should I upgrade my CGA5722 firmware?
- 2. How do I know which firmware version I have in my CGA5722?
- 2.1 Determine the IP address of your CGA5722 Wireless Base Station.
- 2.2 Browse to your CGA5722 Wireless Base Station. Open Internet Explorer and type the Default Gateway address (192.168.2.1 in this example) in the Address bar.
- 2.3 On the Home network Setting page, click on Status and you can find the firmware version.
- 3. How do I know what the latest firmware is?
- 4. How do I upgrade to the latest firmware?
- 5. Your CGA5722 Wireless Base Station firmware is now upgraded.
How to upgrade the CGA5722 Wireless Base Station firmware
Page 2 of 7
1. Why should I upgrade my CGA5722 firmware?
• To add new functionality or to fixes some issues.
Issues Problems fixed:
- Synchronisation issue of Huawei DSLAM.
- Not possible to set MER (Mac Encapsulated Routing) with UCP protocol( CD install )
2. How do I know which firmware version I have in my CGA5722?
Make sure your PC is connected to your Wireless Base Station (either by Wi-FI or by Ethernet)
2.1 Determine the IP address of your CGA5722 Wireless Base Station.
Click on your PC Start => Run
Type cmd and click OK.
type ipconfig followed by Enter.
The Default Gateway shows the IP address of the Wireless Base Station (192.168.2.1 in this example).