Operation Manual

12 1. Installation
Machine Functions
1.
1. Installation
Package Contents
e following parts are included in the package:
Setting Up the
Multifunction Machine
1 Remove the transport protection (e.g. tape). Any
sticker can be pulled off without leaving any resi-
due.
Æ
Set up your machine so that the socket is
easily accessible because your multifunction
machine does not have an on/off button. (To
disconnect your machine from the power supply,
pull the power plug out of the socket—see the
chapter Safety Instructions.)
2 Insert the printout tray into the slot provided in the
paper output until reaching the stop.
3 Pull the printout tray as far out as possible and fold
the paper stopper up to prevent a paper jam.
Loading Printing
Media
Load paper into the paper tray before plugging in the
machine. Your multifunction machine supports nu-
merous paper formats and types. You can use both pre-
printed material and refill paper of the supported paper
types (see chapter Appendix / Technical Data).
Multifunction
machine
Printout tray
Power cord with plug
(country-specific)
Telephone cord with
plug
(country-specific)
Two ink cartridges
(black and colour)
Installation-CD
Installation guide
User manual
²
If a part is missing that is not one of the coun-
try-specific items or if parts are damaged,
please contact your retailer or our customer serv-
ice (see back side of this user manual).
WLAN adapter
(country-specific package
contents)
USB cable (country-
specific package contents)
Sample paper
(country-specific pack-
age contents)