Always there to help you Register your product and get support at www.philips.
English Contents 1 Important 2 2 3 3 3 3 4 2 Your product 4 4 5 6 7 7 Safety Mains fuse Care for your product Care of the environment Compliance Help and support Main unit Remote control Connectors Wireless speakers Wireless subwoofer 3 Connect and set up Connect the main unit Charge speakers Pair up with speakers/subwoofer Place speakers Connect to TV Connect audio from TV and other devices 17 8 8 8 8 9 10 10 4 Use your product 12 12 12 12 13 13 14 14 14 5 Update software Check software versi
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Before you make or change any connections, make sure that all devices are disconnected from the power outlet. • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product.
• When you change the batteries, always keep all new and used batteries out of reach of children. Ensure that the battery compartment is completely secure after you replace the battery. If the battery compartment cannot be completely secured, discontinue use of the product. Keep out of reach of children and contact the manufacturer. This is CLASS II apparatus with double insulation, and no protective earth provided. Mains fuse This information applies only to products with a UK mains plug.
Hereby, WOOX Innovations, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the EC declaration of Conformity is available at www.philips.com/support. Help and support For extensive online support, visit www.philips.
Blinks continuously when no audio from the selected HDMI ARC source is detected, or when an unsupported audio format is detected. Blue LED • Lights up when you switch to Bluetooth mode and Bluetooth devices are paired. • Blinks when you switch to Bluetooth mode and Bluetooth devices are not paired. b NFC tag Tap the NFC-enabled device on the tag for Bluetooth connection. c d e (Standby-On) Switch the main unit on or to standby. Remote control This section includes an overview of the remote control.
: Switch to Bluetooth mode; Press and hold three seconds to break the current Bluetooth connection. HDMI ARC: Switch your source to HDMI ARC connection. c d Connectors This section includes an overview of the connectors available on this product. / Skip to the previous or next track in USB mode and Bluetooth mode (only for AVRCP-supported Bluetooth devices). Start, pause or resume play in USB mode and Bluetooth mode ( only for AVRCPsupported Bluetooth devices). e BASS +/Increase or decrease bass.
This product comes with a pair of wireless surround speakers. • • Switch the surround speaker on. The surround speaker automatically turns off after 4 minutes of being wirelessly disconnected from the main unit. Wireless subwoofer This product comes with a wireless subwoofer. a a b b * The illustration above is for either of wireless surround speakers. a LED indicaton Red LED • Lights up when the battery capacity is less than 30% remaining (undocked from the main unit).
3 Connect and set up This section helps you connect this product to a TV and other devices, and then set it up. For information about the basic connections of this product and accessories, see the quick start guide. Note •• For identification and supply ratings, see the type plate 1 at the back or bottom of the product. •• Before you make or change any connections, make sure that all devices are disconnected from the power outlet.
Pair up with the speakers 2 3 Turn on the main unit and the surround wireless speakers. »» If the connection to the main unit is lost, the red and orange LEDs on the wireless speaker blink alternatively. Dock the left and right wireless speakers onto the main unit (the left and right base speakers) to pair up automatically. »» If the pairing is successful, the orange LED on the wireless speaker lights up for five seconds.
3 4 L/ R surround speakers (left/right): Place the rear surround speakers to the left and right side of your seating position, either in line with it or slightly behind it. TV SUBWOOFER (subwoofer): Place the subwoofer at least one meter to the left or right of the TV. Leave about 10-centimeter clearance from the wall. Dock the surround speakers 1 You can also dock your surround speakers onto the main unit to listen to audio, for example, watching TV shows and news.
Option 3: Connect audio through analog audio cables Best quality audio Basic quality audio English Option 1: Connect audio through a digital optical cable AUDIO OUT L TV 1 Using an optical cable, connect the OPTICAL connector on the right base speaker of this product to the OPTICAL OUT connector on the TV or other device. • The digital optical connector might be labeled SPDIF or SPDIF OUT.
4 Use your product Equalizer Change the high frequency (treble) and low frequency (bass) settings of this product. 1 This section helps you use this product to play audio from connected devices. Before you start • Make the necessary connections described in the quick start guide and the user manual. • Switch this product to the correct source for other devices. Synchronize video and sound If the audio and video are not synchronized, delay the audio to match the video.
1 2 3 4 5 The operational range between the main unit (left and right speakers) and a Bluetooth device is approximately 10 meters (30 feet). Press on the remote control to switch this product to Bluetooth mode. »» The blue LED on the right base speaker blinks. On the Bluetooth device, switch on Bluetooth, search for and select Philips CSS5235Y to start connection (see the user manual of the Bluetooth device on how to enable Bluetooth). »» During connection, the blue LED on the right base speaker blinks.
2 3 Press the buttons on the MP3 player to select and play audio files or music. Press once or two times AUX on the remote control until higher volume is heard. • On the MP3 player, it is recommended to set the volume in the range of 80% maximum volume. USB storage devices Enjoy audio on a USB storage device, such as an MP3 player and USB flash memory, etc. What you need • A USB storage device that is formatted for FAT or NTFS file systems, and complies with the Mass Storage Class.
To get the best features and support, update your product with the latest software. What you need • Connect this product to your TV through HDMI. b Put the "CSS5235.bin" and "MCU5235.bin" in the root directory of the USB device. 3 4 5 Note •• Dock the surround speakers onto the main unit (the left and right base speakers), so that the surround speakers can be upgraded. Check software version 1 2 Switch to HDMI ARC mode (press HDMI ARC).
6 Product specifications •• Weight • Left base speaker: 1.11 kg • Right base speaker: 1.29 kg •• Built-in speakers • 2 x woofer (76.2mm/3", 8 ohm) • 2 x tweeter (25.4mm/1", 8 ohm) Note •• Specifications and design are subject to change without notice. Amplifier • • • • Total output power: 200W RMS (+/- 0.5 dB, 10% THD) Frequency response: 20 Hz-20 kHz / ±3 dB Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted) AUX Input sensitivity: • 400mV +/- 100mV (connection to an external device with 3.
Warning •• Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/support. Main unit The buttons on this product do not work. • Disconnect this product from the power supply for a few minutes, then reconnect. Sound No sound from the speakers of this product.
NFC A device cannot connect with this product via NFC. • Make sure that the device is supported by NFC. • Make sure that NFC is enabled on the device (see the device' s user manual for details). • For pairing, tap the NFC device on the NFC tag of this product.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Digital Surround is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved. Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.
Specifications are subject to change without notice 2015 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. CSS5235Y_12_QSG_V1.