DCB146 Quick Start Guide What’s in the Box? You should find these items upon opening the box.
Connection 1 Connect the speaker wires to the SPEAKERS terminals. 2 Connect the power cord of the system to the AC power outlet. DAB/FM wire antenna speaker (left) speaker (right) 1 2 AC power cord Tip: It is unnecessary to connect the DAB/ FM antenna since it is fixed to the main unit.
Setting the clock 1 In standby mode, press and hold DISPLAY/CLOCK on the remote control set for 2 seconds. 2 Press PROG to select 12-hour or 24-hour display. 3 Press DISPLAY/CLOCK to confirm. ➜ The clock digits for the hours flash. 4 Press TUNING 4 ¢ (or 4 ¢ on the remote control) to set the hours. 5 Press DISPLAY/CLOCK again. ➜ The clock digits for the minutes flash. 6 Press TUNING 4 ¢ (or 4 ¢ on the remote control) to set the minutes. 7 Press DISPLAY/CLOCK to confirm the time.
Tuning to DAB stations 1 Press SOURCE (or DAB on the remote control) to select DAB to start an automatic search of available DAB stations. 2 Press 4 / ¢ to change the DAB stations. 3 Press OK to confirm a selection. 4 To perform a local scan (in UK ), press briefly SCAN. To perform a full scan (outside UK ), press and hold SCAN. 5 To access setup options, press MENU then use the navigation control buttons to select. Programming and tuning to FM stations 1 Select FM TUNER source.
STANDBY-ON MIC RO S Y STE M DCB146 Playing iPod using the dock iR 1 Press PUSH TO OPEN to open the dock. CD/CD -R/CD -RW COMPATIBLE SOURC E VOL TUNING PRESE T DOCK VOL 2 Select the dock adaptor of the correct type and size, and snap it into the dock. ➜ Each iPod adaptor has its indication to fit a specific iPod. PUSH TO OPEN DOCK FOR iPOD 3 Correctly place your iPod in the dock. 4 Press SOURCE repeatedly or DOCK on the set (or iPOD on the remote control) to select iPod source.