Register your product and get support at Docking Entertainment System www.philips.
1 Important Safety Important Safety Instructions a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
m Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. n Apparatus shall not be exposed to dripping or splashing. o Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles).
This product complies with the requirements of the following directives and guidelines: 2004/108/EC + 2006/95/EC Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Recycling Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. 2 Your Docking Entertainment System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips. com/welcome. Introduction With this unit, you can enjoy audio from the iPod, other audio devices, or the radio. The radio, iPod, or buzzer can be set as the alarm timer.
Overview of the main unit SOURCE SELECT r SLEEP p TUNING – INFO / MENU TIME SET / AUTO SCAN DAB FM BUZZ WAKE TO iPod TUNING +
TUNING – INFO / MENU TIME SET / AUTO SCAN TUNING + DAB FM BUZZ WAKE TO iPod MP3-Link DC IN 6.5V1.3A a ALARM 1/ALARM 2 • Set the alarm timer. • View the alarm time. • Turn off the alarm tone. b REPEAT ALARM/BRIGHTNESS CONTROL • Repeat the alarm. • Adjust the display brightness. c SOURCE • Select a source: iPod, DAB, FM tuner, MP3 link or power off (standby). d SLEEP • Set the sleep timer. e PRESET +/• Select a preset radio station. • Adjust time.
f Display panel • Show current status. g Dock compartment h i • • • Start or pause iPod play. / Skip to the previous/next audio file. Search within an audio file. j TUNING +/• Tune to DAB/FM radio station. • Adjust time. k INFO/MENU • Select DAB menu. • Display DAB and RDS information. l WAKE TO iPod/DAB/FM/BUZZ • Select alarm mode. m MP3-LINK • Jack for an external audio device. n DC IN • Power supply socket. o TIME SET/AUTO SCAN • Set the clock. • Scan DAB/FM radio stations.
• • 3 Program DAB/FM radio stations. Confirm DAB menu selection. Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No.
Connect power Caution •• Risk of product damage! Ensure that the power voltage corresponds to the voltage printed on the back or underside of the apparatus. •• Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord. •• Before connecting the AC adaptor, ensure you have completed all other connections. Note •• The type plate is located on the bottom of the main unit. 1 Connect one end of the AC adaptor to the DC IN socket on the main unit.
2 Connect the other end of the AC adaptor to the wall outlet. Set clock 1 2 3 4 5 6 7 8 9 In standby mode, press and hold TIME SET/AUTO SCAN for 2 seconds. »» [SYNC ON] begins to blink. Press TUNING +/- to select a sync mode and press TIME SET/AUTO SCAN to confirm. »» The 24H or 12H begins to blink Press TUNING +/- to select the clock format. »» The hour digits begin to blink. Press TUNING +/- to set the hour. Press TIME SET/AUTO SCAN. »» The minute digits begin to blink.
4 Play Play from iPod You can enjoy audio from iPod through this unit. Compatible iPod Apple iPod models with a 30-pin dock connector: • iPod classic, iPod touch, iPod nano, iPod 5th generation (video), iPod with color display, iPod mini. Load the iPod 1 Push to open the dock compartment.
2 Place the iPod in the dock. Remove the iPod 1 Pull the iPod out of the dock. Listen to the iPod 1 2 Ensure that the iPod is loaded correctly. Press SOURCE repeatedly to select iPod source. »» The connected iPod plays automatically. • To pause/resume play, press . • To skip to a track, press / . • To search during play, press and hold / release to resume normal play. , then Charge the iPod When the unit is connected to power, the docked iPod begins to charge.
Play from an external device You can also listen to an external audio device through this unit. 1 Press SOURCE repeatedly to select MP3 link source. 2 Connect the supplied MP3 link cable to: • the MP3-LINK jack (3.5mm) on the back of the unit. • the headphone jack on an external device. 3 Start to play the device (see the device user manual). 5 Listen to radio Note •• Only FM radio reception is available on this unit.
Tip •• If no DAB service is available, [NO SERV] is displayed, and then [Slect Manual] is displayed. Tune to DAB radio station manually 1 2 3 Press SOURCE repeatedly to select [DAB]. Press TUNING +/- to navigate the service list. Press SELECT to confirm the selected DAB radio station. Scan DAB radio stations automatically You can perform both full scan and local scan to search for DAB radio stations. • Full scan: For users outside the UK. Wide range search. • Local scan: Only available in the UK.
3 4 Press and hold SELECT for two seconds. »» The preset number of the saved station appears. Press PRESET +/- to select a preset number. Show DAB information 1 2 Tune to a DAB radio station. Press INFO/MENU repeatedly to scroll through the following information (if available): »» Dynamic label segment (DLS) »» Program type (PTY) »» Ensemble Name »» Time »» Channel and frequency »» Bit rate and audio status »» Signal error rate Listen to FM radio 1 2 Press SOURCE repeatedly to select FM radio.
Program radio stations automatically You can program a maximum of 20 preset radio stations. 1 In the tuner mode, press and hold TIME SET/AUTO SCAN for more than 2 seconds to activate automatic program mode. »» [FM SCAN] is displayed. »» All available stations are programmed in the order of waveband reception strength. »» The first programmed radio station is broadcast automatically. Program radio stations manually You can program a maximum of 20 preset radio stations. 1 Tune to a radio station.
Select a preset radio station 1 Press PRESET +/- to select a preset number. Reset the preset radio stations 1 2 3 6 In FM/DAB mode, during broadcasting, press and hold INFO/MENU. »» [SELECT FACTORY] is displayed on the screen. Press SELECT. »» [CONFIRM Reset] is displayed on the screen. Press SELECT to confirm. »» All preset radio stations are cleared. Other features Set the alarm timer You can set two alarms which go off at different time. 1 Ensure that you have set the clock correctly.
9 10 Press TUNING +/- to select alarm volume. Press ALARM 1 or ALARM 2 to confirm. Set alarm mode 1 Adjust the WAKE TO iPod/DAB/FM/BUZZ control to select the source for the alarm. »» When the alarm time comes, the selected iPod, radio or buzzer turns on. Tip •• If iPod source is selected but no iPod is loaded, the buzzer is selected automatically. Activate and deactivate the alarm timer 1 Press ALARM 1 or ALARM 2 repeatedly to activate/deactivate the timer.
Tip •• You can press TUNING+/- to adjust interval (5-15minutes) to repeat alarm. Stop alarm ring 1 • When the alarm rings, press the corresponding ALARM 1 or ALARM 2. »» The alarm stops but the alarm settings remain. You also can press SLEEP/SOURCE. »» If iPod is connected, the alarm stops and iPod plays automatically. View the alarm settings 1 Press ALARM 1 or ALARM 2. Set the sleep timer This unit can switch to standby automatically after a set period of time.
Note •• When the sleep timer is activated, the volume will gradually decrease. Adjust display brightness 1 7 Press BRIGHTNESS CONTROL repeatedly to select different levels of display brightness. Product information Note •• Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power Signal to Noise Ratio MP3 Link 2X1.5 W RMS >55 dB 0.
Tuner FM Tuning Range Tuning grid Sensitivity - Mono, 26dB S/N Ratio - Stereo, 46dB S/N Ratio Search Selectivity Total Harmonic Distortion Signal to Noise Ratio 87.5 - 108 MHz 50 KHz <22 dBu <45 dBu <28 dBu <3% >45 dB General information AC power (power adaptor) Input: 100-240V~, 50/60Hz, 0.4A; Output: 6.5V 1.3A; Brand name: Philips; Model No.: AS090-065-AC130 <5W Operation Power Consumption Standby Power Consumption <2W Dimensions -M ain Unit (W x H x D) 144 x 144 x 62 mm Weight - Main Unit 0.
SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP M ROCK M MOR M LIGHT M CLASSICS OTHER M WEATHER FINANCE CHILDREN SOCIAL RELIGION PHONE IN TRAVEL LEISURE JAZZ COUNTRY NATION M OLDIES FOLK M DOCUMENT TES ALARM Sports Education and advanced training Radio plays and literature Culture, religion and society Science Entertainment programs Pop music Rock music Light music Light classical music Classical music Special music programs Weather Finance Children’s programs Social Affairs Religion Phone In Travel Leisure
About DAB About Digital Audio Broadcasting (DAB) DAB digital radio is a new way of broadcasting radio via a network of terrestrial transmitters. It provides listeners with more choice and information delivered in crystal clear, crackle-free sound quality. – The technology allows the receiver to lock on to the strongest signal it can find. – With DAB digital stations there are no frequencies to remember, and sets are tuned by station name, so there’s no returning on the move.
To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www.philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available. No power •• Ensure that the AC power plug of the unit is connected properly. •• Ensure that there is power at the AC outlet.
© 2009 Koninklijke Philips Electronics N.V. All rights reserved. Printed in China DCB210_05_UM_V2.
