Component DVD Micro System User Manual

20
Note
There are definitions of RDS program types •
(see “Product information” > “RDS program
types”).
Synchronize clock with RDS station
You can synchronize the clock time on the
unit with an RDS station.
1 Tune to an RDS radio station that
transmits time signals.
2 Press DISPLAY/RDS for over 2 seconds.
» [CT SYNC] is displayed and the unit
reads RDS time automatically.
If no time signal is received, » [NO CT]
is displayed.
Note
The accuracy of the transmitted time depends •
on the RDS station that transmits the time
signal.
Program radio stations
manually
Note
You can program a maximum of 20 preset •
radio stations.
1 Tune to a radio station.
2 Press ANGLE/PROG to activate
programming.
3 Press / to allocate a number from
1 to 20 to this radio station, then press
ANGLE/PROG to confirm.
The preset number and the frequency »
of the preset station are displayed.
4 Repeat the previous steps to program
other stations.
Note
To overwrite a programmed station, store •
another station in its place.
Tune to a preset radio station
1
Press / to select a preset number
that you want.
Show RDS information
RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to an RDS station, an
RDS icon and the station name are displayed.
1 Tune to an RDS station.
2 Press DISPLAY/RDS repeatedly to scroll
through the following information (if
available):
Station name »
Program type such as » [NEWS] (news),
[SPORT] (sport), [POP M] (pop
music)...
Frequency »
EN