Component DVD Micro System User Manual

23
10 Other features
Activate demonstration mode
You can see an overview of all features.
1 In the standby mode with clock display
(if set), press
on the main unit to
activate the demonstration mode.
A demonstration of major available »
features starts.
To deactivate the demonstration mode:
1 Press on the main unit again.
Set alarm timer
This unit can be used as an alarm clock. You can
select CD, iPod/iPhone, FM or USB as alarm source.
Note
Ensure that you have set the clock correctly. •
1 In standby mode, press and hold SLEEP/
TIMER until [SET TIMER] (set timer)
scrolls on the display.
2 Press SOURCE repeatedly to select a
source: CD, FM, USB, iPod/iPhone or
iPod/iPhone playlist.
If iPod/iPhone playlist is selected as •
alarm source, you need create a playlist
called “PHILIPS” in your iPod/iPhone.
If no playlist called “PHILIPS” is •
created in the iPod/iPhone or no
track is stored in the playlist, the unit
switches to iPod/iPhone alarm source.
3 Press SLEEP/TIMER to confirm.
The hour digits are displayed and begin »
to blink.
4 Press VOL +/- repeatedly to set hour, and
then press SLEEP/TIMER again.
The minute digits are displayed and »
begin to blink.
5 Press VOL +/- to set minute, and then
press SLEEP/TIMER to confirm.
6 Press VOL +/- to adjust volume, and then
press SLEEP/TIMER to confirm.
A clock icon appears on the display. »
[Parental Control]
Restrict access to discs that are unsuitable
for children. These types of discs must be
recorded with ratings.
1) Press OK.
2) Select a rating level, and then press OK.
3) Press the numeric keys to enter the
password.
Note
Rated discs above the level you set in • [Parental
Control] require a password to be played.
The ratings are country-dependent. To allow
•
all discs to play, select [8. Adult].
Some discs have ratings printed on them but
•
are not recorded with ratings. This function
has no effect on such discs.
[Password]
This setting allows you to change the
password for parental control. The default
password is ‘123456’.
1) Press the numeric keys to enter ‘123456’
or your last set password at [Old
Password] field.
2) Enter the new password at [New
Password] field.
3) Enter the new password again at [Confirm
new password] field.
4) Press OK to exit the menu.
Note
If you forget the password, enter ‘123456’ •
before you set a new password.
[Version Info]
Display the software version of this apparatus.
[Default]
Reset all the settings to factory default, except
for the password and parental settings.
English
EN