Register your product and get support at www.philips.
Listen through headphone 17 8 Product information 1 Important 3 Safety Notice 3 4 2 Your Micro Music System Introduction What's in the box Overview of the main unit Overview of the remote control 3 Get started Connect speakers Connect power Prepare the remote control Turn on Set clock 4 Play Basic play operations Play from disc Play from USB Adjust sound 5 Play iPod/iPhone Compatible iPod/iPhone Load the iPod/iPhone Charge the iPod/iPhone Listen to the iPod/iPhone Remove the iPod/iPhone 6 Listen t
1 Important & & Safety & & Know these safety symbols This 'bolt of lightning' indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The 'exclamation point' calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
& Never remove the casing of this apparatus. & Never lubricate any part of this apparatus. & Never place this apparatus on other electrical $ = & Never look into the laser beam inside this apparatus. & Make sure that you always have easy access to the power cord, plug, or adaptor to disconnect the apparatus from the power. Caution & Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
( !; K _ ( QVVQ<]\< KZ= Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential * ( $ ( human health.
Engl i s h 2 Your Micro Music System Congratulations on your purchase, and # ` q ; ! support that Philips offers, register your product at www.philips.com/welcome. Introduction With this unit, you can: & K " ; % { G ( % ` % iPhone, and other external devices; & Listen to radio stations.
Overview of the main unit i j a k b l c m d e n f g h o a & & & & Turn on the main unit. Switch to standby mode. b SOURCE & Select a source. c STOP & Stop play or erase a program. d & e 7 PLAY/PAUSE Start or pause play. / EN PREVIOUS/NEXT & & Skip to the previous/next track. Fast reverse or fast forward within a track or disc. Tune to a radio station. Adjust time. & Connect to USB storage device. f g MP3-LINK & Connect to an external audio device. h & Connect to a headphone.
& a MODE & < ; Z_% or USB source. Open/close the disc compartment. j Display panel & Show current status. k MODE & < ; Z_% or USB source. b CLOCK & Set clock. c MENU & Access iPod/iPhone menu. d l CLOCK & Set clock. / Fast reverse or fast forward within a track or disc. & Skip to the previous/next track. & Tune to a radio station. & Adjust time. & m ALB/PRESET+/& Select a preset radio station. & Skip to the previous/next album.
p DISPLAY & Show playback information. q & Start or pause play. r VOL +/& Adjust volume. s DBB & Turns on or off dynamic bass enhancement. t RDS & For selected FM radio stations: display RDS information.
Connect power Engl i s h 3 Get started Caution Caution & * q K # ; & Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in $ = If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus.
2 Insert 2 AAA batteries with correct ; )[<+ = 3 Close the battery compartment. Note & When the unit remains idle for 15 minutes, it switches from standby mode automatically. Set clock Turn on Press to turn on. » The unit switches to the last selected source. Tip & In standby mode, you can also press source selection keys to switch on the unit. Switch to standby mode Press again to switch the unit to standby mode. » ) + ; panel.
Engl i s h 4 Play Basic play operations You can control play through following operations. Key / DISPLAY MODE Function = Press and hold to fast-forward/fastbackward the track during playback, then release to resume play. To pause/resume play during playback. To show different play information. To select a repeat play mode: [REP] ) + ; repeatedly. [REP ALL] ) + ; tracks repeatedly. [SHUF]) + ; randomly.
Adjust sound During play, you can adjust volume through following operations. Key VOL +/MUTE DBB DSC 13 EN Function To increase/decrease the volume. To mute/restore sound. To turn on or off dynamic bass enhancement. If DBB is activated, [DBB] is displayed.
; $ # ` < iPhone. You can enjoy audio from the docked system through the powerful speakers. Charge the iPod/iPhone Engl i s h 5 Play iPod/iPhone When the unit is connected to power, the docked iPod/iPhone starts charging automatically.
6 Listen to FM radio Program radio stations manually Note & You can program a maximum of 20 preset radio stations. Tune to FM radio stations Note & Make sure that you have connected and fully extended the supplied FM antenna. 1 2 Press TUNER. 3 $ ; * % release the button. » The FM tuner tunes to a station with strong reception automatically. 4 Press and hold / for two seconds to tune to a radio station. Repeat steps 2-3 to tune to more stations. 1 2 Tune to a radio station.
Press RDS repeatedly to scroll through the # * ) ( ! + » Station name Engl i s h 2 » Program type such as [NEWS] ) # +% [SPORT] ) +% [POP M] (pop +=== » Radio text » $ ; Synchronize clock with RDS You can synchronize time shown on the unit with that on the RDS station. 1 Tune to a RDS radio station that transmits time signals. 2 Press RDS for over 2 seconds. » [CT SYNC] is displayed and the unit reads RDS time automatically.
7 Other features Note & Alarm timer is not available in MP3 LINK mode. & If DISC/USB/DOCK source is selected, yet no disc is placed or no USB/iPod/iPhone is connected, the system switches to the tuner source automatically. Set alarm timer This unit can be used as an alarm clock. You _ Z% { G% { K % _-Z alarm source. Note & Make sure that you have set the time correctly. 1 2 3 In standby mode, press and hold TIMER until [TIMER SET]) + display.
< 36 dBu <3% > 45 dB Speakers Note & Product information is subject to change without prior notice. Speaker Impedance Speaker Driver Sensitivity 4 ohm 3.5" >82dB/m/W General information Rated Output Power $ ; Signal to Noise Ratio Aux Input 2X5W RMS 60 - 16 kHz, ±3dB >65 dB 0.
& & ID3 tag v2.0 or later File name in Unicode UTF8 (maximum * Q !; + Unsupported formats: & K ; ! ; ! ! `< = & { = E % )= + ` # E = * not played.
Warning & Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before $ * ( = ! unsolved, go to the Philips web site (www. = <# += ; Philips, ensure that the apparatus is nearby and the model number and serial number are available. No power K Z # is connected properly.
Specifications are subject to change without notice © 2012 Koninklijke Philips Electronics N.V. All rights reserved. DCM1130_12_CCR_V1.