Always there to help you Register your product and get support at www.philips.
Contents 1 Important Safety Notice Care for your product 7 Adjust sound 2 2 2 4 2 Your Micro Music System 5 Introduction What's in the box Overview of the main unit 5 5 6 3 Get started Connect speakers Connect FM antenna Connect power Prepare the remote control Power on Set the clock 4 Play Play from disc Play from USB Basic play operations Skip tracks Program tracks 5 Play iPod/iPhone Compatible iPod/iPhone Load the iPod/iPhone Listen to the iPod/iPhone Charge the iPod/iPhone Remove the iPod/iPhone
1 Important Safety Read and understand all instructions before you use this micro music system. If damage is caused by failure to follow the instructions, the warranty does not apply. 5LVN RI HOHFWULF VKRFN RU ÀUH Never remove the casing of the product. Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately.
Compliance This product complies with the radio interference requirements of the European Community. This apparatus includes this label: Care of the environment Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC.
SURJUDPV ÀOHV EURDGFDVWV DQG VRXQG recordings, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes. Note The type plate is located on the back of the product. Care for your product 4 Do not insert any objects other than discs into the disc compartment. Do not insert warped or cracked discs into the disc compartment.
2 Your Micro Music System Congratulations on your purchase, and ZHOFRPH WR 3KLOLSV 7R IXOO\ EHQHÀW IURP WKH support that Philips offers, register your product at www.philips.com/welcome.
Overview of the main unit j i h a b g c d f e a Turn on the product. Switch to standby mode or ECO power standby mode. b Display panel Show current status. c Connect USB storage devices. d AUDIO IN Connect external audio devices. e Disc compartment f Open or close the disc compartment. g VOLUME Adjust volume. h SOURCE Select a source: DISC, USB, AUDIO IN, TUNER, or iPhone/iPod. 6 EN / Skip to previous/next track. Search within a track/disc.
Select a preset radio station. Navigate through iPod/iPhone playlist. a f b c / Skip to the previous or next track. Press and hold to search within a track. Tune to a radio station. d r g + VOL Increase or decrease the volume level. e q h Start, pause, or resume play. i REPEAT/SHUFFLE Select a play mode. f p g j MUTE Mute or restore volume. k SOUND Select a preset sound effect. h o i j n k m l l CLOCK Set the clock. m TIMER/SLEEP Set the alarm timer.
3 Get started Connect the supplied FM antenna to the SPEAKER OUT socket on the main unit. Caution Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. Connect speakers Note Connect power For optimal sound, use the supplied speakers only. Connect only speakers with impedance that is the same or higher than the supplied speakers.
Prepare the remote control » The red ECO power standby indicator turns on. Caution Risk of product damage! When the remote control is In Eco power standby mode, press to switch between working mode and ECO power standby mode. not used for long periods, remove the batteries. To insert the remote control battery: 1 2 3 Open the battery compartment. Insert the supplied AAA battery with correct polarity (+/-) as indicated. Close the battery compartment.
4 Play Play from USB Ensure that the USB device contains playable audio contents for supported formats. Play from disc 1 2 3 4 Press FM/ CD to select the CD source. Press to open the disc compartment. Insert a disc with the label side up. Press to close the disc compartment. » Play starts automatically. 1 2 Insert the USB device into the USB socket. Press USB/AUDIO IN to select the USB source. » Play starts automatically.
Basic play operations Program tracks You can control play through following operations. This function allows you to program 20 tracks in the desired sequence. / / REPEAT/ SHUFFLE VOL +/MUTE SOUND DISPLAY Start, pause, or resume play. Stop play. Select an album or a folder. Press to skip to the previous or next track. Press and hold to search backward/forward within a track. To select a repeat play mode: [ ] (repeat one): play the current track repeatedly.
5 Play iPod/iPhone 3 Select your desired connector and press it down until a click sound. » The switch slides to the left. You can enjoy audio from iPod/iPhone through this unit.
Charge the iPod/iPhone When DCM2330 is connected to power, the docked iPod/iPhone begins to charge automatically. Remove the iPod/iPhone Pull the iPod/iPhone out of the dock. DOCK To pause/resume play, press . To skip to a track, press / . To search during play, press and hold / , then release to resume normal play. To navigate in the menu: press MENU/ , and press / / / to select, and then press OK WR FRQÀUP Note MENU/ / iOS devices.
6 Listen to FM radio Program radio stations manually Note You can program a maximum of 20 preset radio stations. Tune to FM radio stations Note Ensure that you have connected and fully extended the supplied FM antenna. 1 2 Press and hold / until the frequency starts to change. » The FM tuner tunes to a station with strong reception automatically. Program radio stations automatically Note You can program a maximum of 20 preset radio stations.
7 Adjust sound The following operations are applicable to all supported media. Select a preset sound effect Press SOUND repeatedly to select a preset sound effect. DSC1, DSC2, DSC3, DSC4, and DSC5 Adjust volume level On the remote control, press VOL +/repeatedly. On the main unit, press VOL+/VOLrepeatedly. Mute sound Press MUTE to mute or restore the sound.
8 Other features Note If you do not stop an alarm, it keeps ringing for 30 minutes, and then DCM2330 automatically switches to normal standby mode. Set the alarm timer DCM2330 can be used as an alarm clock. You can select the disc, iPod/iPhone library, FM radio VWDWLRQ RU PS ÀOHV VWRUHG RQ D 86% VWRUDJH device as alarm source. Note Make sure that you have set the clock correctly. If the selected alarm source is unavailable, DCM2330 switches to FM mode automatically.
AUDIO IN EN 17
9 Product information USB USB Direct Version USB 5 V Power Note Disc Product information is subject to change without prior notice.
USB playability information Supported MP3 disc formats Compatible USB devices: 86% ÁDVK PHPRU\ 86% RU 86% 86% ÁDVK SOD\HUV 86% RU 86% memory cards (requires an additional card reader to work with this unit) Supported formats: 86% RU PHPRU\ ÀOH IRUPDW )$7 )$7 FAT32 (sector size: 512 bytes) MP3 bit rate (data rate): 32-320 Kbps and variable bit rate WMA v9 or earlier Directory nesting up to a maximum of 8 levels Number of albums/ folders: maximum 99
10 Troubleshooting Warning Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
Specifications are subject to change without notice. 2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. DCM2330_12_UM_V1.