Software Upgrade

Introduction:

Philips strives to continually bring you the best experience from our products. To obtain the optimal

playback and latest features, you are highly recommended to upgrade the firmware of your player.

Preparation for firmware upgrade:

 A PC with an archive utility that supports the ZIP-format (e.g. WinZip for Windows).

 A USB flash device with enough free space to hold the firmware file. An empty one is advised to

avoid a crash among files.

Upgrade Procedure:

Step 1: Check your current firmware version

1. Turn on the player.

2. In standby mode, press and hold “Preset –“ & “STOP” keys for 3 seconds. Then you can see

“MCM3000VXX” or “DCM3020VXX” on the screen.

3. Compare the firmware version displayed to the latest version. If the existing firmware in your

player is of an earlier version than the new release, please proceed to Step 2.

Otherwise, the latest firmware is installed and hence an upgrade is not needed.

Step 2: Upgrade the firmware for your player

Warning: DO NOT turn off the device or remove the USB flash device during the firmware upgrade

procedure. If an error occurs during the upgrade, retry the procedure. If you need further assistance,

please call your local Philips Consumer Care Center or use our Live Chat function.

1. Extract the firmware upgrade file from the downloaded firmware package.

Note: Please DO NOT rename either the folder name or the file name in the folder to avoid an

upgrade corruption.

2. Copy the extracted the firmware file to the root directory in the USB flash drive.

3. Turn on the player.

4. Press “Source” button and select “USB mode”.

5. Insert the USB flash drive into the USB slot.

6. The player will search for the upgrade files in your USB flash drive. Once the files have been

recognized, your player will start upgrading automatically.

Note: Do not disconnect the USB flash drive from your player before the message “DONE” is

displayed.

7. Restart your player and it will then be ready with the new firmware installed.

Step 3: Confirm upgrade successfulness

1. Check your current firmware

version

2. Upgrade the firmware for your

player

3. Confirm upgrade

successfulness

PAGE 1
Introduction: Philips strives to continually bring you the best experience from our products. To obtain the optimal playback and latest features, you are highly recommended to upgrade the firmware of your player. Preparation for firmware upgrade:   A PC with an archive utility that supports the ZIP-format (e.g. WinZip for Windows). A USB flash device with enough free space to hold the firmware file. An empty one is advised to avoid a crash among files. Upgrade Procedure: 1.
PAGE 2
1. 2. Go over Step 1 Check your current firmware version to verify if the new firmware is correctly upgraded. If the latest firmware has not been installed, repeat ‘Step 2 Upgrade the firmware for your player’ and ‘Step 3 Confirm upgrade successfulness’.