Owner's Manual

GENERAL FEATURES
MONITOR (on the main unit)
Press MONITOR repeatedly to adjust
the display mode (normal or full screen).
DISPLAY
Press DISPLAY on the remote repeatedly for the following display options:
DVD CD/VCD DivX
x 1 Title elapsed Single elapsed Single elapsed
x 2 Title remained Single remained Single remained
x 3 Chapter elapsed Total elapsed Display off
x 4 Chapter remained Total remained
X5 Display off Display off
TIP
During JPEG operation, pressing this button enables you to select 17
slideshow modes.
PROGRAM
1 During playback, press PROG on the remote to enter a program menu.
2 Use the numerical keys 0-9 to directly input the tracks or chapters (single
track number with digit "0" in front, for example "05").
3 Move the cursor by pressing to select START and then press OK to start
program playback.
GENERAL FEATURES
TIP
The repeat function is also available for JPEG, SD/MMC etc. The actions
may vary for different media being played.
SHUFFLE
Press SHUFFLE on the remote to play all tracks (for CD),
chapters (for DVD) or all tracks in the selected folder/whole
disc (for MP3) randomly.
Repeat A - B
To repeat or loop a sequence in a title:
• Press A
- B at your chosen starting point;
A appears on the screen.
• Press A
- B again at your chosen end point;
AB appears on the display, and the repeat sequence begins.
• To exit the sequence, press A
- B.
Volume Control
• Use the rotatary switch on the left side of the unit to
increase or decrease playback volume.
Brightness
• Use the rotary switch on the left side of the unit to
finetune the TFT brightness.
BASIC FUNCTIONS
Switching on for OSD language setup
English is the default language of your player’s on screen display. You may choose
to use English, French or Spanish for your player’s on screen display.
Country OSD Language Options
America English, French, Spanish
1 Slide the POWER switch to ON to switch on the player.
2 Press SETUP for the setup menu.
3 Select General Setup Page and press OK.
4 Scroll and select OSD Lang and press 2 to select
from OSD language options.
5 Select your preferred language and press OK.
Loading discs and switching on
1
Press OPEN to open the disc door.
2 Insert your chosen disc, label side up (also when a double sided
DVD disc is inserted). Make sure it is sitting properly in the correct recess.
3 Gently push to close the door.
4 Slide the POWER switch to ON to switch on the player.
TIP
A normal mechanical noise is heard during playback.
BASIC FUNCTIONS
Playing a DVD disc
After switching on, inserting the disc and closing the door, playback starts
automatically. The screen shows the type of disc loaded. The disc may invite you
to select an item from a menu. Use the 3, 4, 1, 2 keys to highlight your
selection,and press OK.
Note: Since it is usual for DVD movies to be released at different times in
different regions of the world, all players have region codes and discs can have
an optional region code. If you load a disc of a different region code to your
player, you will see the region code notice on the screen. The disc will not play,
and should be unloaded.
Playing an audio or video CD disc
• After switching on, inserting the disc and closing the door, playback starts
automatically. The screen shows the type of disc loaded as well as information
about the disc’s contents.
• While playing VCD with MTV/Karaoke, press number keys(0-9) to select the
track and press 2
;
or OK to play the track. Press TITLE/RETURN to go back
to menu of the selection.
Playing DivX
®
disc
• Philips provide you the DivX
®
VOD (Video on Demand) registration code that
allows you to rent and purchase videos using the DivX
®
VOD service. For more
information, visit www.divx.com/vod.
• Select the DivX
®
VOD on the Video Setup Page.
• The registration code will appear.
• Use the registration code to purchase or rent the videos from DivX
®
VOD
service at www.divx.com/vod. Follow the instructions and download the video
onto a CD-R for playback on this DVD player.
TIP
All the downloaded videos from DivX
®
VOD can only be played
back on this DVD player.