Register your product and get support at www.philips.
1 Wichtig Sicherheitsanweisungen Wiederaufladbare Batterie Speicherkarten Gehörschutz Gesetzliche Bestimmungen zu Tonaufnahmen Recycling Über dieses Benutzerhandbuch Modellspezifische Funktionen und Diagramme Verwendete Symbole 35 35 35 35 36 36 36 36 36 36 2 Ihr digitales Diktiergerät 37 3 Erste Schritte 41 Produkt-Highlights Packungsinhalt Übersicht der Bedienungselemente und Anschlüsse Displaysymbole Installieren des Diktiergerätes Einsetzen und Auswerfen der Speicherkarte Aufla
Anzeigemenü Helligkeit Beleuchtung Erscheinungsbild Aufnahmelampe Language Gerätemenü Signalton Akust. Rückmeldung Energiesparmodus Datum & Uhrzeit Schiebeschalter Autom.
Wichtig Nehmen Sie nur Anpassungen und Änderungen vor, die in diesem Handbuch beschrieben werden. Befolgen Sie alle Sicherheitsanweisungen, um den ordnungsgemäßen Betrieb des Gerätes sicherzustellen. Der Hersteller übernimmt keine Haftung für Schäden, die sich aus der Nichteinhaltung der Sicherheitsanweisungen ergeben. Sicherheitsanweisungen • Schützen Sie das Gerät vor Regen oder Wasser, um einen Kurzschluss zu vermeiden.
Gehörschutz Halten Sie bei Verwendung der Kopfhörer folgende Richtlinien ein: • Stellen Sie die Lautstärke moderat ein und hören Sie nicht zu lange über Kopfhörer. • Achten Sie unbedingt darauf, die Lautstärke nicht höher einzustellen, als es Ihr Gehör verträgt. • Stellen Sie die Lautstärke nur so hoch ein, dass Sie immer noch hören, was um Sie herum geschieht. • In möglicherweise gefährlichen Situationen sollten Sie sehr vorsichtig sein oder die Nutzung vorübergehend unterbrechen.
2 Ihr digitales Diktiergerät Packungsinhalt Deutsch Wir freuen uns, dass Sie sich für ein Gerät von Philips entschieden haben. Auf unserer Website finden Sie umfangreiche Informationen wie Benutzerhandbücher, Software-Downloads, Garantieinformationen und vieles mehr: www . philips . com / dictaton.
Übersicht der Bedienungselemente und Anschlüsse a LED • Rot: Gerät nimmt im Überschreib- oder Anhängemodus auf • Grün: Gerät nimmt im Einfügemodus auf • Gelb: Daten werden an den oder vom Computer übertragen b Mikrofone c Bildschirm d Funktionstasten F1, F2, F3 • Wählen Sie die Funktion, die auf dem Bildschirm direkt über der Taste angezeigt ist e +/– • Dateinavigation im Stoppmodus • Lautstärkeregelung während der Wiedergabe • Menü-Navigation f AUFNAHME-STANDBY g Schiebeschalter (A VORLAUF, C WIEDERGABE/
Displaysymbole Hinweis a Deutsch • Die Position der Symbole kann je nach Modell, Modus und den ausgewählten Funktionen variieren. Sprachaktivierung ist eingeschaltet • Bei einer sprachaktivierten Aufnahme startet die Aufnahme, sobald Sie zu sprechen beginnen. Wenn Sie aufhören zu sprechen, wird die Aufnahme nach drei Sekunden Stille automatisch unterbrochen und erst dann wieder fortgeführt, wenn Sie wieder anfangen zu sprechen. Sprachaktivierte Aufnahme, S. 48.
h EOL/Dateisperre • Die Aufnahme ist als abgeschlossen gekennzeichnet und vor dem versehentlichen Löschen geschützt. Dateisperre und Priorität, S. 49. i Position des Schiebeschalters j Position der Empfindlichkeitsstärke für die sprachaktivierte Aufnahme ( Sprachaktivierte Aufnahme, S. 48) k Aktuelle Funktion der Funktionstasten F1, F2, F3 l Positionsleiste der Empfindlichkeitsstärke m Schlüsselwortbereich • Jeder Aufnahme können ein oder mehrere Schlüsselwörter wie der Autorname o. Ä.
Erste Schritte Vorsicht • Vergewissern Sie sich, dass Sie die Sicherheitsanweisungen gelesen haben, bevor Sie Ihr Diktiergerät anschließen und installieren. Sicherheitsanweisungen, S. 35. Installieren des Diktiergerätes Hinweis • Laden Sie die Batterie vor der ersten Verwendung drei Stunden lang auf. Die Batterie ist im Gerät vorinstalliert. Ziehen Sie das Batterieband vor dem Aufladen aus dem Batteriefach heraus.
Hinweise • Entfernen Sie die Speicherkarte nie während einer laufenden Aufnahme. Dadurch können Daten beschädigt werden oder verloren gehen. • Philips wendet anerkannte Industriestandards für Speicherkarten an, doch sind die Produkte einiger Marken möglicherweise nicht mit Ihrem Gerät kompatibel. Das Verwenden einer nicht kompatiblen Speicherkarte kann das Gerät oder die Speicherkarte und die darauf gespeicherten Daten beschädigen.
Energiesparmodus Die Erstinstallation startet bei der ersten Verwendung des Gerätes oder möglicherweise nach einer langen Unterbrechung der Stromversorgung. Die Eingaben zu Datum und Uhrzeit werden bei jeder Aufnahme als Aufnahmezeit gespeichert. Standardmäßig wechselt das Gerät nach fünf Minuten Inaktivität in den Energiesparmodus. Durch Anheben des Gerätes oder Drücken einer beliebigen Taste wird das Gerät wieder aktiviert.
4 Verwenden des Diktiergerätes Vorsicht • Entfernen Sie die Batterie nicht während einer Aufnahme aus dem Gerät. Dadurch können Daten beschädigt werden oder verloren gehen oder Gerätestörungen auftreten. Hinweis • Sie können die Einstellungen und das Verhalten Ihres Diktiergerätes benutzerdefiniert anpassen ( Einstellungen, S. 53.) • Die Beschreibungen in diesem Kapitel basieren auf den Standardeinstellungen.
Sie können eine bestehende Aufnahme bearbeiten, indem Sie einen Abschnitt überschreiben oder eine weitere Aufnahme einfügen. 1 Drücken Sie im Stoppmodus auf F2 (Menü) und wählen Sie Aufnahme > Bearbeitungsmodus. 2 Stellen Sie den benötigten Bearbeitungsmodus ein ( Bearbeitungsmodus, S. 55). • Anhängemodus: hängen Sie eine weitere Aufnahme an eine bestehende Aufnahme in einer Datei an.
Wiedergabe Anpassen der Wiedergabegeschwindigkeit Auswählen einer Datei 1 1 Drücken Sie im Stoppmodus auf +. XXDer Positionsanzeiger springt zum Ende einer Datei. XXDer Positionsanzeiger springt zum Anfang der nächsten Datei. 2 Drücken Sie im Stoppmodus auf –. XXDer Positionsanzeiger springt zum Anfang einer Datei. XXDer Positionsanzeiger springt zum Ende der vorherigen Datei.
Löschen Hinweise • Gelöschte Dateien können nicht wiederhergestellt werden. • Dateien, die als abgeschlossen oder gesperrt (EOL) gekennzeichnet sind, können nicht gelöscht werden. Sperren können über die Schaltfläche EOL aufgehoben werden. • Stellen Sie sicher, dass die Speicherkarte nicht schreibgeschützt (gesperrt) ist. 5 Drücken Sie im Stoppmodus auf F2 (Löschen), um das Löschen des Abschnitts zu bestätigen.
5 Weitergehende Funktionen Indexmarkierungen Indexmarkierungen können verwendet werden, um bestimmte Stellen einer Aufnahme als Referenzpunkte zu markieren. 1 Um eine Indexmarkierung hinzuzufügen, drücken Sie während der Aufnahme oder Wiedergabe auf F1 (Index). XXDie Indexnummer wird eine Sekunde lang angezeigt. XXPro Datei können bis zu 32 Indexmarkierungen gesetzt werden. 2 Um eine Indexmarkierung zu finden, drücken Sie im Stoppmodus auf + / – ( Auswählen einer Datei, S. 46).
Jeder Aufnahme können ein oder mehrere Schlüsselwörter wie der Autorname oder ein Arbeitstyp zugewiesen werden. Die Schlüsselwörter können zur Identifizierung von Aufnahmen und für das automatische Datei-Routing der Software Philips SpeechExec verwendet werden. Hinweis • Die Schlüsselwörter müssen zunächst in der Software Philips SpeechExec eingerichtet werden. Weitergehende Konfiguration, S. 51.
• N (Neutral): Für die Aufnahme treten Sie auf das rechte Pedal und halten es gedrückt. Wenn Sie den Fuß vom Pedal heben, wird die Aufnahme pausiert. • T (Umschalten): Treten Sie kurz auf das rechte Pedal, um die Aufnahme zu starten. Für eine Pause treten Sie erneut auf das rechte Pedal. Tipp • Verwenden Sie die Option „Automatischer Rücksprung“ um die konfigurierte Anzahl an Sekunden in der Aufnahme zurückzuspringen, wenn die Wiedergabe gestartet wird.
4 Für den schnellen Rücklauf treten Sie auf das linke Pedal und halten es gedrückt. Heben Sie den Fuß vom Pedal, sobald Sie die gewünschte Position erreicht haben. 5 Für den schnellen Rücklauf treten Sie auf das mittlere Pedal und halten es gedrückt. Heben Sie den Fuß vom Pedal, sobald Sie die gewünschte Position erreicht haben. 6 Treten Sie auf das rechte Pedal des Fußschalters, um die Wiedergabe zu starten.
Hinweis • Wird das Diktiergerät erstmalig an den Computer angeschlossen, erkennt Windows die neue Hardware und installiert automatisch die erforderlichen Treiber. Ist die Installation abgeschlossen, fordert Windows Sie möglicherweise auf, den Computer neu zu starten. Aufnahmen auf den PC herunterladen Durch die USB-Massenspeicher-Unterstützung wird das Gerät automatisch als externes Laufwerk angezeigt, wenn es an den Computer angeschlossen wird.
Einstellungen Menü verwenden 1 Drücken Sie im Stoppmodus auf F2 (Menü), um das Menü zu öffnen. 2 Drücken Sie auf + / –, um den nächsten/vorherigen Menüpunkt auszuwählen. 3 Drücken Sie auf F3 (Wählen), um ein Untermenü zu öffnen. Drücken Sie auf F1 (Zurück), um das Untermenü zu verlassen. 4 5 Drücken Sie auf + / –, um eine Funktion auszuwählen. Drücken Sie auf F2 (OK), um die Auswahl zu bestätigen oder auf F1 (Zurück), um das Untermenü zu verlassen, ohne Einstellungen zu ändern.
Dateimenü Datei löschen Löschen einzelner Dateien vom Gerät. Löschen einer Datei, S. 47. Abschnitt löschen Löschen eines Abschnitts einer Datei. Löschen eines Abschnitts einer Datei, S. 47. Priorität hoch / normal Mit der Prioritätsfunktion können dringende Aufnahmen mit Vorrang behandelt werden. Sie können Hoch (Symbol wird angezeigt) oder Normal auswählen. Die Standardeinstellung ist Normal. Dateisperre und Priorität, S. 49.
Aufnahmemenü Bei einem Aufnahmeprofil werden Aufnahmeparameter wie Aufnahmequalität und Dateiformat, Mikrofonempfindlichkeit und Mikrofonmodus voreingestellt, um der Aufnahmesituation gerecht zu werden. Das Symbol für das Profil wird in der Informationsleiste am oberen Bildschirmrand angezeigt. • Persönlich: Passen Sie alle Einstellungen benutzerdefiniert an. »» Aufnahmequalität: Stellen Sie das Dateiformat und die Qualität der Aufnahme (Bitrate) ein.
Anzeigemenü Gerätemenü Helligkeit Signalton Passen Sie die Helligkeit des Displays an. Die Einstellung der Helligkeit des Displays wirkt sich auf den Stromverbrauch des Gerätes aus. Aktivieren/deaktivieren Sie Tasten- und Signaltöne. Beleuchtung Damit können Sie sich die Aufnahme beim Vor- oder Rücklauf anhören. Schnellsuche, S. 46.
Freihandmodus Schieben Sie den Schiebeschalter kurz in die Position B Rücklauf, um die konfigurierte Anzahl an Sekunden in der Aufnahme zurückzuspringen: Aus (Standard), 1 sek, 2 sek, 3 sek, 4 sek. Durch den Anschluss eines optionalen Philips Fußschalters LFH2210 an die optionale Dockingstation ACC8120 kann das Diktiergerät für eine freihändige Aufnahme oder Transkription verwendet werden. In diesem Aufnahmemodus können Sie die Funktionen von Aufnahme und Wiedergabe über den Fußschalter steuern.
7 Service Führen Sie nur Wartungsarbeiten durch, die in diesem Benutzerhandbuch beschrieben werden. Zerlegen Sie das Gerät nicht in seine einzelnen Bestandteile, um Reparaturen vorzunehmen. Das Gerät darf nur in autorisierten ServiceCentern repariert werden. Geräteinformation anzeigen 1 2 Drücken Sie im Stoppmodus (Startbildschirm) auf F2 (Menü) und wählen Sie Gerät > Geräteinformation. XXEs werden allgemeine Geräteinformationen angezeigt: Seriennummer, Modellnummer und Firmware-Version des Gerätes.
Problem Mögliche Ursache / Lösung Das Gerät lässt sich nicht einschalten • Die Batterie ist leer. XXLaden Sie die Batterie auf. • Das Gerät ist ausgeschaltet. XXSchalten Sie es ein. Ein-/Ausschalten, S. 42. • Das Gerät befindet sich im Energiesparmodus. XXDurch Anheben des Gerätes oder Drücken einer beliebigen Taste wird das Gerät wieder aktiviert. Aufnahmen lassen sich nicht wiedergeben • Im Gerät sind keine Aufnahmen gespeichert.
8 Technische Daten Anschlussmöglichkeiten • Kopfhörer: 3,5 mm • Mikrofon: 3,5 mm • USB: Highspeed USB 2.0 • Dockingstation-Anschluss • Speicherkarteneinschub Display • Typ: Farbe TFT • Bildschirmdiagonale: 6,1 cm • Auflösung: 320 × 240 Pixel Speichermedien • Wechselspeicherkarte • Speicherkarten: SD/SDHC, bis zu 32 GB • MSC-Unterstützung Audioaufnahme • Aufnahmeformat: DSS/DSS Pro (Digital Speech Standard), MP3, PCM • Integrierte Mikrofone: 2 omnidirektionale Mikrofone • Aufnahmemodi: DSS QP (.
DE 61 Deutsch
62 DE
Federal Communications Commission notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
Specifications are subject to change without notice. © 2016 Speech Processing Solutions GmbH. All rights reserved. Philips and the Philips shield emblem are registered trademarks of Koninklijke Philips N.V. and are used by Speech Processing Solutions GmbH under license from Koninklijke Philips N.V. All trademarks are the property of their respective owners. Document version 1.1, 2016/01/15. Document number 7278 203 2010.