Always there to help you Register your product and get support at www.philips.
Contents 1 Important Safety 2 2 2 Your Docking Speaker 3 3 3 3 3 Get started 4 4 4 4 4 Play 5 5 5 6 6 5 Product information Specifications 7 7 6 Troubleshooting 8 7 Notice 9 9 Introduction What's in the box Overview of the main unit Connect power Adjust time Turn on Play from iPod/iPhone Charge your mobile phone Adjust volume Adjust brightness Disposal of your old product EN 1
1 Important the disconnect device shall remain readily operable. Warning Safety •• Never remove the casing of this apparatus. •• Never lubricate any part of this apparatus. •• Never place this apparatus on other electrical equipment. •• Keep this apparatus away from direct sunlight, naked Important Safety Instructions • • • • • • • • • • • • • 2 Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings.
2 Your Docking Speaker a Dock for iPod/iPhone b Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. • Adjust brightness of bottom light. c CLOCK • Adjust brightness of the display. • Press and hold to set the clock. d • Charge your mobile phone through a USB cable. e DC IN • Connect AC power.
3 Get started 2 Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ 3 Connect power In standby mode, the docking speaker turns on automatically when it detects an audio signal from docked iPod/iPhone.
4 Play Listen to the iPod/iPhone Note •• Make sure that the iPod/iPhone is loaded correctly. Play from iPod/iPhone You can enjoy audio from iPod/iPhone through this docking speaker. Compatible iPod/iPhone The docking speaker supports the following iPod/iPhone models. Made for: • iPhone 5 • iPod nano (7th generation) • iPod touch (5th generation) Load the iPod/iPhone Start to play music from your iPod/iPhone. »» Music streams from the docking speaker automatically.
Adjust volume During play, press +/- repeatedly to increase or decrease the volume. Adjust brightness • • 6 Press CLOCK repeatedly to select different levels of display brightness. Press repeatedly to select different levels of bottom light brightness.
5 Product information Note •• Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power 2 x 3W RMS 77 dBA Signal to Noise Ratio General information AC power adaptor Operation Power Consumption Charging (USB) Dimensions: Main Unit (W x H x D) Weight: Main Unit Model: OH1018A0592400U (Philips) Input: 100-240 V, 50/60 Hz, 650 mA; Output: 5.9 V 2400 mA; 18 W ≤500 mA 177 x 177 x 100 mm 0.
6 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
7 Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products and batteries.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. DS1155_98_UM_V1.