Always there to help you Register your product and get support at www.philips.
Contents 1 Important Safety Notice 2 2 2 2 Your Docking Speaker 4 4 4 4 3 Get started 6 6 6 Introduction What's in the box Overview of the main unit Connect power Turn on 4 Play 7 7 8 9 10 5 Product information Specifications 11 11 6 Troubleshooting 12 Play audio from iPod/ iPhone/ iPad Play through an audio cable Other features Update the firmware EN 1
1 Important Warning •• Never remove the casing of this apparatus. •• Never lubricate any part of this apparatus. •• Never place this apparatus on other electrical equipment. Safety • • • • • • • • • • • • • 2 Read these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
The making of unauthorized copies of copyprotected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes. “Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards.
2 Your Docking Speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Overview of the main unit a b k j c i Introduction h g With the docking speaker, you can: • enjoy audio from your iPod/iPhone/iPad; • enjoy audio from an external audio device; • charge any generation of iPod/iPhone/iPad and external audio devices.
h Display panel i • / Adjust volume. j Toggle switch for lightning/30-pin control k • Adjust brightness of display and bottom light.
3 Get started Turn on Always follow the instructions in this chapter in sequence. In standby mode, the docking speaker turns on automatically when it detects an audio signal from docked iPod/iPhone/iPad. Connect power Caution •• Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the back of the unit. •• Risk of electric shock! When you unplug the AC adapter, always pull the plug from the socket. Never pull the cord.
4 Play Play audio from iPod/ iPhone/ iPad You can enjoy audio from iPod/ iPhone/ iPad by connecting the docking speaker. Switch the dock Switch the dock between the lightning connector and 30-pin connector for different generation of Apple device. 1 2 Slide the switch to the right. »» The dock swivels and the alternate connector is accessible. Select your desired connector and press down until a click sound. • The switch slides to the left.
2 When using the docking speakerfor the first time, a required software application automatically pops up. Listen to the iPod/ iPhone/ iPad Note •• Make sure that the iPod/ iPhone/ iPad is loaded correctly. • 3 4 Charge the iPod/ iPhone/ iPad Tap [Yes] (yes)to accept the installation request. Follow the on-screen instructions to complete the installation. »» The docking speaker synchronizes time and date from the docked iPod/ iPhone/iPad.
Charge your mobile phone Charge your mobile phone through the USB socket in the docking speaker with a USB cable (not supplied). B: If no iPod/iPhone/iPad is docked, you can set time manually. 1 2 3 4 5 In standby mode, press TIME/DATE to display [--:--]. Press and hold TIME/DATE for 2 seconds to activate time setting. »» The hour digits blink. Press +/- repeatedly to set the hour. Press TIME/DATE to confirm. »» The minute digits blink. Repeat steps 3 and 4 to set the minute.
Adjust brightness • • Press repeatedly to select different levels of display light. Press and hold to turn on or off the bottom light. 3 sec 3 Follow onscreen instructions to complete firmware updating. Note Update the firmware With the ClockStudioapp on your iPod/ iPhone/ iPad, you can update the firmware of the docking speaker. 1 2 Make sure that your iPod/ iPhone/ iPad is connected to the Internet. Mount the iPod/ iPhone/ iPad onto the lightning dock of the docking speaker.
5 Product information Note •• Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power Signal to Noise Ratio MP3 Link Input 2 x 2.5 W RMS > 55 dBA 650m V RMS Amplifier Speaker Impedance Speaker Driver 4 ohm 1.5'' General information AC/DC switching adapter Operation Power Consumption Standby Power Consumption USB Charging Ipod/Iphone Charging Dimensions: Main Unit (W x H x D) Weight: Main Unit Model: AS250-050AQ400 Input: 100-240 V~, 50/60 Hz, 1.
6 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
Specifications are subject to change without notice. 2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. DS1600_77_UM_V2.