User manual

18
Advanced sound settings
For advanced sound settings and additional
features, you can use your AirPlay device to
download the Philips Fidelio application from
Apple App Store.
Update rmware
Note
•
You can only update the rmware from a PC/Mac.
Download the update le
1 On your PC/Mac, go to www.philips.com/
support.
2 Enter the model number to nd the latest
rmware upgrade le available.
3 Save the upgrade le to your hard drive.
Update from the conguration page
1 Power on the unit (see ‘Prepare - Connect
- Connect power’).
» It takes about 35 seconds for the unit
to boot up. During boot-up, the
indicator on the front of the main unit
blinks in green quickly.
» After boot-up, the
indicator starts to
blink in green slowly.
2 Make sure that the unit and PC/Mac are
connected to the same wireless router.
Stream from your Wi-Fi enabled PC
or Mac installed with iTunes 10 (or
later)
Note
•
Before you open iTunes, make sure that you have
enabled Bonjour service in your PC. Take Windows
XP for example: to enable the service, you can click
Start->Settings->Control Panel, and double-click
Administrative Tools-> Services->Bonjour Service,
and then click Start followed by OK on the pop-up
menu.
1 Open iTunes 10 (or later).
2 Click the AirPlay icon at the bottom right
corner of the window.
3 Select Philips_Fidelio_AirPlay XXXX (or
user customized name) from the list.
4 Select a media le and start play.
5 Wait until successful audio streaming to
the speaker.
Control play
You can select different play options from either
your AirPlay device or the supplied remote
control.
Note
•
All the operations below are based on the supplied
remote control.
• To start or pause play, press .
• To skip to the previous or next track, press
/ .
• To adjust volume, press +/- repeatedly.
• To mute or restore volume, press
.
• To switch to the AUX IN source (if
connected), press
.
• To switch back to the AirPlay device
source, press
.
EN