User manual
11EN
Charge the iPod/iPhone/iPad
When the unit is connected to power, the
docked iPod/iPhone/iPad begins to charge
automatically.
Remove the iPod/iPhone/iPad
Pull the iPod/iPhone/iPad out of the dock.
Play from USB
Note
• Ensure that the USB device contains playable audio
content.
1 Press CD/FM repeatedly on the remote
control or press SOURCE repeatedly on
the main unit to select the USB source.
2 Insert the USB device into the (USB)
socket on the back of the unit.
» The le starts playing automatically. If
not, press .
Play from a Bluetooth device
You can listen to a Bluetooth device through
the unit.
Note
• Before you connect a Bluetooth device to the unit,
familiarize yourself with the Bluetooth capabilities of
the device.
• Keep the unit away from other electronic devices that
may cause interference.
• The effective operation range between the unit and the
paired device is approximately 10 meters (30 feet).
• Any obstacle between the unit and the device can
reduce the operational range.
1 Press SOURCE repeatedly on the main
unit or press /DOCK on the remote
control to select Bluetooth source.
2 Activate the Bluetooth function on your
Bluetooth device (see the device user
manual).
3 Select "PHILIPS DTM3170" on your device
for pairing.
» The Bluetooth indicator lights up in
blue.
» The unit beeps twice.
• For some devices, you may need to
input "0000" as the pairing password.
4 Start music play on your Bluetooth device.
Tip
• If the unit switches from Bluetooth source to other
sources, the connected Bluetooth device disconnects
automatically.
BT
0000
PIN
PHILIPS
DTM3170
BT