DTR4610/28 DTR2610/28 MANUELE D'UTILIZZO USER MANUAL (nero per 0) il DTR261 PHILIPS
Meaning of symbols Important information: Must be read and understood. The “Material recyclability symbol” affixed on plastic packaging parts means these parts are recyclable. So do not dispose of them with your normal household waste. The “Green Dot” affixed on cardboard means PHILIPS pays a financial duty to the “Avoidance and Recovery of Packaging Waste” organization.
Contents Meaning of symbols ___________________1 6 Safety and environmental instructions___1 6.2 English Contents_____________________________2 1 Unpacking _______________________3 2 Installation guide _________________3 3 Product description_______________6 3.1 3.2 Front view ______________________6 Rear view_______________________7 4 Remote Control __________________8 5 Day to Day operation _____________9 5.1 5.2 5.3 5.3.1 5.3.2 5.3.3 5.3.
1 Unpacking Remote control with batteries Mains cord SCART cable Phone cord (adapter not supplied) (DTR4610 only) RF cable (DTR4610 only) The package also includes the following documents: - User Manual - Philips World-Wide Guarantee Plastic bags can be dangerous. To avoid suffocation keep the bag away from babies and children. 2 Installation guide Please refer to the safety section before connecting your receiver.
The smart card golden or silver contacts must be facing up at card insertion. English When this crossed-out wheeled bin symbol is attached to a product or its packaging, it means the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste.
9 Next, highlight the country where you operate the receiver by pressing V or W, and then press OK. 10 The next screen is used to select both the TV screen format corresponding to your TV set and update mode. Highlight the appropriate format by pressing C or B, then move to the update mode selection using V or W, and highlight Yes to allow for automatic software update. Alternatively, highlight No if you prefer to be notified when software update is available. Press OK to initiate the channel search.
3 Product description 3.1 Front view 1 2 3 English 1 2 3 4 5 6 Smartcard slot LOW POWER button: TV/RADIO button: "-" button: Bicolour LED: Red LED 7 "+" button: 4 5 6 7 Switch the receiver on or to "low power". Toggle between digital TV and digital radio. Channel down. Display receiver status (see status indicator table). Display receiver status (see status indicator table). Blink at remote control command reception. Channel up.
3.2 Rear view 2 3 4 5 English 1 6 7 1 Telephone Line*** (3) 2 VCR SCART* (1) 3 Digital Audio* 4 Serial* 5 Aerial In* 6 230V~50Hz 15W max** 7 Label 8 TV SCART* (1)(2) 9 L/R Audio Output* 10 RF Out* 8 9 10 To connect the supplied telephone cord to be connected to your telephone line using the appropriate adapter (adapter not supplied). To connect a SCART lead to be connected to the SCART socket input (EXT1) of your VCR or DVD Recorder.
4 Remote Control 0-9 number keys - In viewing mode: select channels. - In menu: directly select a menu item or set a setting. - In standby: wake up the receiver. English INFO Switch between channel banner, extended info page one and then subsequent pages, and normal viewing. EXIT Return to normal viewing. If EXIT is pressed and held for at least 2 seconds, the current application is closed and normal viewing is resumed.
5 Day to Day operation 5.1 Turn on your receiver or switch to low power 5.2 Wake up your receiver or switch to standby While watching digital TV or listening to digital radio, press the standby key of the remote control to switch your receiver to standby. While your receiver is in standby, to wake it up: - Either press the P+, P-, RADIO or any number key of the remote control. - Or press the -/+ or TV/RADIO button on the front panel. 5.
5.4 Selecting digital TV or digital Radio To switch between digital TV and digital Radio, press the RADIO key. 5.5 Channel Banner Channel Number Current Time & Date English Start Time Channel Name Icons Channel Number End Time Progress Bar Program Name Channel Banner Icons This icon informs that some program information is available for the program displayed in Channel Banner. This icon informs that the current channel is locked.
5.6 Changing the current programme options Option Menu 5.7 How to Run MHP Interactive Applications Interactive Applications Icon Display Option Screen Your receiver supports downloading and running MHP interactive applications. Some applications are run automatically on tuning to a respective channel. Other applications need to be launched manually. If you tune to a channel on which interactive applications are broadcast, you will see the icon on the Channel Banner.
6 Main Menu Main Menu 1-Timer Manager English 2-Your Preferences 3-Parental Control Display Options Language Options Security Settings Change PIN Code Location Settings 4-Channel Manager 5-Data Channels 6-Installation Channel Installation Signal Meter Installation of New Channels System Information System Settings Re-install all Channels Manual receiver Update Modem Connection Update Settings 8-Pay Per View 12 M A I N M E N U Parental Control Factory Reset TV Settings Modem Settin
6.1 Menu navigation Your receiver offers a menu system that allows you to set the way many of the features of your receiver operate. VW, OK and number keys The Main Menu consists of 8 submenus. To evoke one of the submenus, highlight its name using the V or W keys, and then press OK. You may also press the number key to directly access the respective menu item.
6.3 Timer manager Timer Manager lists all the existing timers. From this screen, you can set, modify, and delete timers. To be able to record a digital programme using a VCR or DVD recorder, you must set a timer on your receiver and also enable recording on the recorder. English Timer Manager Setting a Timer Modifying a Timer Setting a timer - Scroll to an empty line of the list and press OK to add a timer.
6.4 Parental Control Parental Control is used to set PIN code protection on some menus, locked channels, and programmes not suitable for certain audiences. For parents Submenu This item is used to enable the protection features mentioned above and specify a parental level to protect access to programmes according to their maturity level.
6.6.2 Language options This item is used to define the on-screen display language, audio languages, and subtitle languages of your choice. English Language Options Screen 6.7 Installation Installation is used to configure your system, search for channels, and manage your receiver status. When the decoder is locked, access to the Installation menu is protected by PIN code. Installation Submenu 6.7.
Letter-box Pan-Scan Full screen System Settings Screen TV screen format = 4:3 TV screen format = 16:9 full picture with black bars at the top and bottom full picture with black bars on the left and right broadcast format = 16:9 picture cut-off on the left and right full picture squeezed to fit broadcast format = 4:3 picture cut-off at the top and bottom full picture squeezed to fit System settings: - Video standard: PAL or SECAM, pre-configured according to the selected country.
6.7.4 Signal meter Signal Meter is used to display the strength and quality of the signal broadcast at the specified frequency in order to check your antenna connection and setup. English Signal Meter 6.7.5 Receiver Status System Information provides information about the system, loader, and smart card. Besides, the Manual Receiver Update item is used to check whether new software is available for your receiver. If available, press OK to initiate the update.
7 Easy Recording • First of all, consult User Manual of your recorder equipment to check if it supports Easy Recording. Please note that most Philips VCR/DVD recorders support one of the two Easy Recording options: either Prepare Record (to be checked first) or Record Link. • Also, both your TV and VCR shall be equipped with two SCART sockets. If your equipment satisfies above two conditions, connect your receivers as shown in the Connection diagram below.
Assuming the settings of your receiver and recorder (refer to your VCR or DVD recorder user manual) are done, to perform a recording you shall: - Program a timer with your receiver (refer to section 6.3) - Put your recorder in the appropriate status to be controlled by your receiver (refer to the VCR or DVD recorder user manual). At timer occurrence your recorder shall start and stop recording automatically.
8 Troubleshooting guide Check the guide below for a possible cause of the problem you are experiencing. The most common problems that arise are related to cable connections. Make sure that your receiver is properly connected. Nothing lights up on your receiver front panel. Your remote control fails to operate your receiver. Remedy Check that the mains power cord is correctly connected. Disconnect this cord, and then reconnect it to ensure it is in place. Check that power is available at the wall socket.
9 Technical Specifications This product is in conformity with the requirements of the 95/47/EC and 2002/21/EC directives.
