Digital Video Disc Player & Video Cassette Recorder Owner's Manual

R
E
C
O
R
D
123
546
789
0
DVD/VCR
OUTPUT
MEMORY
TIMER SET
DISPLAY
+10
SPEED
SETUP
TITLE
MENU
MODE AUDIO ANGLE SUB TITLE
ENTER
SEARCH MODE
TIME SEARCH STATUS/EXIT
VCR/TV
VCR
DVD
RETURN
CLEAR
C
H
A
N
N
E
L
PLAY
STOP
PAUSE
SLOW
REW F.FWD
REPEAT
A B
POWER
S
KIP
One-Touch Recording 35
1
Press the VCR button, then press the CHANNEL o/p but-
tons or the Number buttons to select the channel you want
to record.
OTR (0:30)
CH12
2
Press the RECORD button repeatedly until the desired
recording length (30 minutes to eight hours) appears on the
screen. Recording will begin immediately. The RECORD light and
the TIMER SET light will appear on the front of the DVD/VCR.
The One-Touch Recording (OTR) feature allows you to set an
immediate timed recording 30 minutes to eight hours long. Before
you begin:
● Set up the TV channels at the DVD/VCR. Details are on page 17.
● Select a recording speed (SP, SLP) with the SPEEDbutton.
● Put a tape in the cassette compartment of the DVD/VCR. Make
sure the tape’s record tab is intact and the tape is long enough to
record the program(s).
● If the end of a tape is reached during an OTR, the DVD/VCR will
eject the tape. The DVD/VCR will switch to DVD mode immedi-
ately, and the TIMERSET light will blink. To let the OTR continue,
insert another tape in the DVD/VCR.
To return to VCR mode, press the TIMER SET button on the
front of the DVD/VCR, then press the DVD/VCR OUTPUT but-
ton so that the green VCR light appears on the front of the
DVD/VCR.
● Place the DVD/VCR in VCR mode. Press the DVD/VCR OUT-
PUT button so that the green VCR light appears on the front of
the DVD/VCR.
● Place the DVD/VCRin VCRposition. Press the VCR/TV button so
that the VCR/TV light appears on the front of the DVD/VCR.
3
To stop an OTR before recording is finished, press the
STOP button.
To cancel the OTRbut continue recording, press the RECORD but-
ton repeatedly until REC appears in the upper left corner of the TV
screen. (STATUS must be set to ON. See page 23 for details.) The
RECORD light will remain on the front of the DVD/VCR, but the
TIMER SET light will disappear.
When the OTR finishes, if no timer recordings are set, the
TIMER SET light will blink. The DVD/VCR power will turn off auto-
matically. When the power is turned on again, the DVD/VCR will be
in DVD mode. To return to VCR mode, press the TIMERSET but-
ton, then press the DVD/VCR OUTPUT button so that the VCR
light appears on the front of the DVD/VCR. (The TIMER SET light
will disappear.)
• To check the time remaining for an
OTR after the OTRhas been set,
press the DISPLAY/STATUS/EXITbut-
ton.
• To change the recording length while
an OTR is in progress, press the
RECORDbutton until the desired
length appears on the screen.
• If you begin an OTR when another
recording is paused, the OTRwill
begin.
• You can not pause an OTR.
• If the preset time for a timer record-
ing comes up during an OTR, the
OTR has priority. A message will
remind you when the timer recording
was scheduled to begin. You may let
the OTR continue; the timer recording
will not take place. Or, stop the OTR
and press the TIMER SET button
immediately. The timer recording will
take place if you press the TIMER
SET button before the timer record-
ing’s scheduled start time.
Helpful Hints
1
2
3
VCR
1