Digital Video Disc Player & Video Cassette Recorder Owner's Manual

R
E
C
O
R
D
123
546
789
0
DVD/VCR
OUTPUT
MEMORY
TIMER SET
DISPLAY
+10
SPEED
SETUP
TITLE
MENU
MODE AUDIO ANGLE SUB TITLE
ENTER
SEARCH MODE
TIME SEARCH STATUS/EXIT
VCR/TV
VCR
DVD
RETURN
CLEAR
C
H
A
N
N
E
L
PLAY
STOP
PAUSE
SLOW
REW F.FWD
REPEAT
A B
POWER
S
K
IP
ONE TIME PROGRAM
PROGRAM 1
CHANNEL 10
TIME ON 09:30 PM
TIME OFF 11:00 PM
REC SPEED SLP
SP=1 SLP=2
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
38 Timer Recording (cont’d)
8
Press the Number 1 button to record in SP speed or the
Number 2 button to record in SLP speed. (See the chart
below.) You cannot use the SPEED button at this time.
9
Press two Number buttons for the month and two
Number buttons for the day you want to record the pro-
gram. For example, for July 10, 2000, press 07, 10. The day of
the week and the year will appear automatically (you cannot pro-
gram the DVD/VCR to record more than one year in advance).
ONE TIME PROGRAM
PROGRAM 1
CHANNEL 10
TIME ON 09:30 PM
TIME OFF 11:00 PM
REC SPEED SLP
START DATE 07/10/00
MON.
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
10
Press the DISPLAY/STATUS/EXIT button. PROGRAM
WAS COMPLETED/PLEASE PUSH TIMER-SET FOR TIMER
RECORDING will appear on the screen briefly. (If PROGRAM
NOT COMPLETED appears, try again from step 1.)
11
Press the TIMER SET button. The TIMER SET light will appear
on the front of the DVD/VCR. The DVD/VCR will be in standby
mode. If you turn on the DVD/VCR power, the DVD/VCR is in
DVD mode. You can use the DVD features.
If the timer recording will take place several hours or days from
now, you may use the DVD/VCR until time for the recording. Press
the TIMERSET button to place the DVD/VCR in standby mode a
few minutes before the recording starts.
If you forget to place the DVD/VCR in standby mode, PLEASE PUSH
TIMER-SET FOR TIMER RECORDING flashes on your TV screen
two minutes before a timer recording starts. Press the CLEAR but-
ton to remove the message. Then press the TIMERSET button.
Cassette type/Playback Time
Tape Speed T160 T120 T60
SP
(standard play) 2 hrs.
2 hrs. 1 hr.
40 mins.
LP (long play) 5 hrs.
4 hrs. 2 hrs.
(playback only) 20 mins.
SLP
(super long play)
8 hrs. 6 hrs. 3 hrs.
Tape Speeds
This chart shows the recording/playback time
for three types of video cassettes (T160, T120,
and T60). There are three playback speeds: SP,
LP, and SLP. When recording, you can change
the tape speed (SP or SLP) using the SPEED
button. You cannot record in LP speed.
Press the TIMER
SET button to
place the
DVD/VCR in
standby mode.
Insert a tape in
the DVD/VCR.
Leave the Cable
Box/DBS on
(if applicable).
8
9
10
11