Digital Video Disc Player & Video Cassette Recorder Owner's Manual

R
E
C
O
R
D
123
546
789
0
DVD/VCR
OUTPUT
MEMORY
TIMER SET
DISPLAY
+10
SPEED
SETUP
TITLE
MENU
MODE AUDIO ANGLE SUB TITLE
ENTER
SEARCH MODE
TIME SEARCH STATUS/EXIT
VCR/TV
VCR
DVD
RETURN
CLEAR
CHANNEL
PLAY
STOP
PAUSE
SLOW
REW F.FWD
REPEAT
A B
POWER
S
K
IP
• To enjoy Dolby Digital Surround or
DTS Surround sound, you must
have the DVD/VCR connected to a
Dolby Digital or DTS decoder.
Details are on page 14.
Helpful Hint
68 Audio Settings
1
While playback is stopped, press the DVD button, then
press the SETUP button. The setup screen will appear.
2
Press the Number 3 button to select AUDIO.
3
Press the corresponding Number button to select an
item: DIGITAL OUT or VIRTUAL 3D.
1
2-3
This unit employs TruSurround system
of SRS Labs, Inc. as the
VIRTUAL 3D technology.
TruSurround and the symbol are trademarks of
SRS Labs, Inc. in the United States and selected
foreign countries.
TruSurround technology is incorporated under
license from SRS Labs, Inc.
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
SETUP
1. LANGUAGE
2. VIDEO
3. AUDIO
4. LOCK
5. OTHERS
Enter / Exit
SETUP/AUDIO
1. DIGITAL OUT
2. VIRTUAL 3D [OFF]
Enter, Back Exit
SETUP/AUDIO
DIGITAL OUT
1. PCM [48kHz]
2. DOLBY DIGITAL [ON]
3. DTS [ON]
• Sets the sample rate for playing a disc
recorded with high sound quality
• Select when a Dolby Digital decoder
is connected.
• Select when a DTS decoder is connected.
Enter, Back Exit
SETUP/AUDIO
VIRTUAL 3D
1. OFF
2. ON
• Select ON to activate the 3D effect.
Enter, Back Exit
To change the DIGITAL OUT settings, go to step 4.
To change the VIRTUAL 3D setting, press the corresponding
Number button, then go to step 5.
1