Always there to help you Register your product and get support at www.philips.
1 Important Safety 2 Your DVD Micro Theater Introduction What's in the box Overview of the main unit Overview of the remote control 3 Connect Place the unit Connect speakers Connect video options Connect power 4 Get started Prepare the remote control Set clock Turn on Find the correct viewing channel Select the correct TV system Change system menu language Set up EasyLink (HDMI-CEC control) 5 Play Play from disc Play from USB or recored discs Control play Select tracks Play options 6 Enjoy karaoke
1 Important • • Safety This 'bolt of lightning' indicates uninsulated material within the device may cause an electrical shock. For the safety of everyone in your household, please do not remove the covering. The 'exclamation mark' calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Warning •• Never remove the casing of this device. •• Never lubricate any part of this device. •• Never place this device on other electrical equipment. •• Keep this device away from direct sunlight, naked flames or heat. •• Never look into the laser beam inside this device.
2 Your DVD Micro Theater The unit supports these media/disc formats: Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this unit, you can: • watch video from DVD/VCD/SVCD or USB storage devices. • enjoy audio from discs, iPod/iPhone/iPad, USB storage devices, or other external devices. • view pictures from discs or USB storage devices.
English Overview of the main unit m l k j i a h b g c d e f a (power button/indicator and Bluetooth indicator) • Turn the unit on or off. • Switch to standby mode or Eco standby mode. • Indicate the power/Bluetooth connection status. b Display panel • Show current status. c SOURCE • Select a source: BT (Bluetooth), DISC, USB, FM, AUX. d • Socket for a USB mass storage device. e MIC IN • Connect a microphone. f • Headphone socket. g Disc compartment h i • Open/close the disc compartment.
f Overview of the remote control STANDBY a EJECT c SUBTITLE/PRESET d SOURCE u h e f AUDIO/ PRESET SOUND g i j k l a b • • r q p h 1 2 3 4 5 6 7 8 9 MENU 0 RDS OPTION PROG TIME CLOCK SET SLEEP • • • k OPTION • In DISC/USB play mode, press to select preferred play options. m ( / ) Navigate through the menu. Search within a track/disc/USB. Tune to a radio station. e SUBTITLE/PRESET + ( ) / AUDIO/PRESET -( ) • Navigate through the menu. • Skip to the previous/next album.
u EJECT • Press to open or close the disc compartment. 3 Connect English t SOURCE • Select a source: dock, BT (Bluetooth), DISC, USB, FM, AUX. Place the unit 1 2 Place the unit near the TV. Place the left and right speakers at equal distance from the TV and at an angle of approximately 45 degrees from the listening position. Note •• To avoid magnetic interference or unwanted noise, never place this apparatus and speakers too close to any radiation devices. •• Place this unit on top of a table.
TV HDMI 1 Connect video options Select the best video connection that the TV can support. • Option 1: Connect to TV through HDMI-ARC (for an HDMI, DVI or HDCPcompliant TV). • Option 2: Connect to TV through standard HDMI (for an HDMI, DVI or HDCPcompliant TV). • Option 3: Connect to the composite video jack (for a standard TV). Option 1: Connect to TV through HDMI (ARC) Best quality video Your home theater supports HDMI version with Audio Return Channel (ARC).
4 On your TV, turn on HDMI-CEC operations. For details, see the TV user manual. • HDMI-CEC is a feature that enables CEC compliant devices that are connected through HDMI controlled by a single remote control, such as volume control for both the TV and the home theater. If you cannot hear the TV audio through your home theater, set up the audio manually. 2 3 4 Connect an audio cable to hear the TV audio through your home theater.
4 Get started Set clock 1 Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
•• The unit switches to Eco Power Standby mode after 15 4 5 To return to the previous menu, press To exit the menu, press . . English Note minutes in standby mode. Switch between standby mode and ECO standby mode: Press and hold for more than two seconds. Find the correct viewing channel 1 2 Press SOURCE repeatedly to select the DISC source.
Enable EasyLink Set up the audio 1 2 3 4 If you cannot hear the audio output of a connected device through your home theater speakers, do the following: • check if you have enabled EasyLink on all the devices, and • on your TV, set the audio output to "Amplifier" (instead of TV speakers). For details, see the TV user manual, and • setup the EasyLink audio control. 5 Press (Home). Select [Setup], and then press OK. Select [Video], and then press OK.
5 Play When you load a DVD/(S)VCD disc, a menu may be displayed on the TV screen. Press MENU to access or exit disc menu manually. Play from disc For VCD with PlayBack Control (PBC) feature (version 2.0 only): With the PBC feature, you can play VCD interactively according to the menu screen. During play, press MENU to enable/disable PBC. »» When PBC is enabled, the menu screen is displayed.
Resume video play from last stopped point USB Note •• This feature is only available for CD/DVD/VCD/DivX STANDBY play. 2 DISPLAY EJECT SOURCE SUBTITLE/ PRESET SOURCE In stop mode and when the disc has not been removed, press . To cancel resume mode and stop play completely: In stop mode, press . To play a specified file: 1 2 Change the audio channel Note •• This feature is only available for VCDs and DivX (Home Theater 3.1) videos.
Navigate to the photo folder/album and press to start the slideshow. »» Slideshow begins and continues till the end of the photo folder or album. »» Audio continues till the end of the last file. • • To return to the previous menu, press To stop the slideshow, press . . Control play ( / / ) / / +/SOUND DISPLAY Select a folder. Fast backward/forward. 2 3 In DISC/USB play mode, press OPTION to select different play options. • [PBC]: turn PlayBack Control on/off.
6 Enjoy karaoke 1) I n the [Karaoke Scoring] option, select a level (basic/intermediate/advance). 2) I n the [Karaoke Idol] option, turn on the contest. »» The song selection menu is displayed. You can connect a microphone (not supplied) to sing along with a music source. 3) I nput a track (VCD/SVCD) or a title/ chapter (DVD) as the first song. Up to four songs can be selected. 4) Then select [Start], and press OK to start play selected songs.
Note •• The effective operation range between the unit and your Bluetooth enabled device is approximately 10 meters (30 feet). •• Any obstacle between the system and the device can reduce the operational range. •• Compatibility with all Bluetooth devices is not guaranteed. 3 4 Select 'PHILIPS DTD3190' on your Bluetooth enabled device, and input '0000' as the paring password if necessary. »» After successful pairing and connection, the power/Bluetooth indicator turns solid blue, and the unit beeps twice.
8 Play iPod/ iPhone/iPad Play audio from the iPod/ iPhone/iPad Note You can enjoy audio from iPod/iPhone/iPad through this unit. Compatible iPod/iPhone/iPad This unit supports the following iPod, iPhone, and iPad models. Made for • iPod touch 5th generation • iPod nano 7th generation • iPhone 5 • iPad 4 • iPad Mini Load the iPod/iPhone/iPad •• Make sure that your iPod/iPhone/iPad has been loaded securely. •• The audio is only output through the supplied speakers.
Program radio stations automatically English 9 Listen to the radio Note Connect an FM antenna to this device before listening to the radio. •• You can program a maximum of 20 preset radio stations (FM). In tuner mode, press and hold PROG for more than two seconds to activate automatic programming. »» [AUTO] (auto) is displayed. »» All available stations are programmed in the order of waveband reception strength, and the first programmed radio station is broadcast automatically.
Show RDS information Radio Data System (RDS) is a service that allows FM stations to show additional information. If you tune to an RDS station, an RDS icon and the station name are displayed. 1 2 10 Listen to an external device Tune to an RDS station. You can listen to an external device through this unit with an audio cable.
Set the alarm timer This unit can be used as an alarm clock. You can select CD, FM, USB, or iPod/iPhone/iPad as alarm source. Note Set the sleep timer English 11 Other features To set the sleep timer, in turn on mode, press TIME/SLEEP repeatedly to select a set period of time (in minutes). »» When sleep timer is activated, is displayed. To deactivate sleep timer: Press TIME/SLEEP repeatedly until [SLP OFF] (sleep off) is displayed. »» When sleep timer is deactivated, disappears.
12 Adjust settings 1 2 3 Press . Select the [Setup] page. Select a setting and press OK. • To return to the previous menu, press . • To exit the menu, press . General setup On the [General] page, you can set the following options: [Disc Lock]: Lock or unlock a disc. [OSD Language]: Select the preferred language for on-screen display. [DivX(R) VOD Code]: Display the DivX(R) registration code. Note •• Enter this DivX registration code when you rent or purchase a video from http://vod.divx.com/.
Preferences On the [Preference] page, you can set the following options: [Audio]: Select the preferred audio language for disc play. [Subtitle]: Select the preferred subtitle language for disc play. [Disc Menu]: Select the preferred disc menu language. Note •• If the language you have set is not available on the disc, Note •• Rated discs above the level you set in [Parental Control] require a password to be played. •• The ratings are country-dependent. To allow all discs to play, select [8 Adult].
13 Product information Note •• Product information is subject to change without prior notice. Specifications Signal to Noise Ratio Total Harmonic Distortion Aux Input Sensitivity Range 60 Hz - 16 kHz; ±3 dB ≥70 dB <1% EN >45 dB 600 mV RMS 6 ohm 4" woofer + 20 mm tweeter >83 dB/m/W V2.1 + EDR 2.4 GHz ~ 2.
<0.5 W 230 x 195 x 235 mm 142 x 307 x 215 mm 2.5 kg 2 x 2.8 kg Supported disc formats • • • • • • • • Digital Video Discs (DVDs) Video CDs (VCDs) Super Video CDs (SVCDs) Digital Video Discs + Rewritable (DVD+RW) Compact Discs (CDs) Picture (Kodak, JPEG) files on CDR(W) DivX(R) disc on CD-R(W): DivX 3.11, 4.x and 5.x Supported MP3-CD formats: • ISO 9660 • Max. title/album name: 12 characters • Max. title number plus album: 255. • Max. nested directory: 8 levels. • Max. album number: 32. • Max.
SCIENCE VARIED POP M ROCK M MOR M LIGHT M CLASSICS OTHER M WEATHER FINANCE CHILDREN Science Entertainment programs Pop music Rock music Light music Light classical music Classical music Special music programs Weather Finance Children’s programs SOCIAL RELIGION PHONE IN TRAVEL LEISURE JAZZ COUNTRY NATION M OLDIES FOLK M DOCUMENT TES ALARM Social Affairs Religion Phone In Travel Leisure Jazz Music Country Music National Music Oldies Music Folk Music Documentary Alarm Test Alarm 14 Troubleshooting Warning
When you switch on the TV, the home theater automatically switches on. • This behavior is normal when you are using Philips EasyLink (HDMI-CEC). To make the home theater work independently, switch off EasyLink. No disc detected •• Insert a disc. •• Check if the disc is inserted upside down. •• Wait until the moisture condensation at the lens has cleared. •• Replace or clean the disc. •• Use a finalized CD or correct format disc. Disc does not play •• Insert a readable disc with the label side facing you.
The audio quality is poor after connection with a Bluetooth-enabled device. •• The Bluetooth reception is poor. Move the device closer to this unit or remove any obstacle between them. Cannot connect with this unit. •• The device does not support the profiles required for this unit. •• The Bluetooth function of the device is not enabled. Refer to the user manual of the device to find out how to enable the function. •• This unit is not in pairing mode.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories. English and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. This apparatus includes this label: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by WOOX Innovations is under license.
2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. DTD3190_98_UM_V4.