Owner's Manual

16 Quick Disc Playback
There are many playback features and options available on Discs.After
familiarizing yourself with the DVD Player as described on pages 17-19, see
pages 20 and following to try additional features.
1
Press STANDBY-ON
yy
or POWER
yy
to turn on the DVD
Player. Turn on your TV. Set it to the correct Video In
channel. You should see the blue DVD screen on the TV.
2
Press OPEN/CLOSE / to open the disc tray.
Load your Disc in the tray, with the label facing up. If the Disc
(DVD) is two-sided, make sure the label of the side you want to play
is facing up.
3
Press OPEN/CLOSE / again to close the tray.
4
Play may start automatically. If not:
• If you are playing a DVD, a Disc menu may appear. If the Title or
Chapter selections are numbered, press a Number button to select
an item. Or, press 341 2 to select an item, then press OK. Playback
will begin. Or, follow the on-screen instructions as detailed in the
DVD Disc menu.
• If you are playing an Audio CD, press PLAY 3 to start play.
• If a Video CD has Playback Control, press DISC MENU to access
its menu while play is stopped. Or, press RETURN/TITLE to see the
menu during playback. Press the Previous 4, Next ¢, 3, 4, 1,
2, or Number buttons to select an item, then press OK. Follow the
instructions provided by the Video CD. Not all Video CDs have
Playback Control. See the Disc case or menus for details.
5
To stop play at any time, press STOP 7.
If you press STOP 7 only once, play will resume at the same point if
you press PLAY 3 later to restart play.This is known as the Resume
feature.
Resume applies to the last five Discs. Press PLAY 3 immediately
after inserting the Disc in the Player (while LOADING shows on the
TV screen). RESUME PLAY will appear on the TV screen briefly.
If you press STOP 7 more than once to stop playback, play will start
at the beginning of the Disc again if you press PLAY 3 later to
restart playback.
• If the Disc is locked by Parental
controls, you must enter your
password or unlock the Disc.
Details are on pages 28-30.
• DVDs have a region code.This
Player will play only DVDs of
Region 1 or ALL. Details are on
page seven.
• If there is no activity at the Player
or its remote for 15 minutes, the
Player will turn itself off. Press
STANDBY-ON y on the Player
or POWER y or PLAY 2 on the
remote to turn on the Player.
Helpful Hints
DVD
AUDIO CD VIDEO CD
1
2-3
1
4
5