User manual

English
24
25
Getting Started (continued)
Modifying Channel Information
You can set a TV channel to your
preference and improve the reception
and the sound quality of the TV channel.
A Press SYSTEM-MENU.
 The system menu appears.
B Use  keys to highlight { System
Menu - Channel Setup } and press .
C Use  keys to highlight { Modify
Channel Information } and press OK.
 The channel menu appears.
Channel
Scan mode
Frequency
TV System
NICAM
Audio
OK
Frequency
PAL I
Name
On
OK
Dual A
Off
Skip
Fine tune
P001/Ch003
55.26MHz
Cancel
Decoder
No
D Use  keys to select one of the
options and press OK.
{ Name }
You can use the numeric keypad 0-9
to select the channel preset number
which you wish to change.
– Use  keys to change alphabet/
number and use   keys to select
different entry fields, then press
OK to
confirm.
{ Scan Mode }
Select TV channel search mode based on
channel allocation or frequency.
– Use  keys to select { Channel },
{ S-Channel } (Special Channel) or
{ Frequency }, then press OK to confirm.
{ Frequency }
Shows the frequency of the current TV
channel.
– If required, use   keys to start the
automatic frequency search and press
OK to confirm.
{ TV System }
Set the TV system that produces the
least distortion of picture and sound.
– Use  keys to select a suitable sound
mode, then press OK to confirm.
(See chapter “TV System Guide” at the
back of this manual for more information).
{ NICAM }
Turn on or off the digital sound
transmission system which improves the
sound quality of the TV channel.
– Use
 keys to select { On } or
{ Off }, then press OK to confirm.
{ Audio }
For bilingual TV programmes, you can
switch between stereo (original) and
additional audio language.
– Use  keys to select { Dual A } or
{ Dual B }, then press OK to confirm.
{ Decoder }
If you have connected the DVD recorder
to an external decoder, select { On } and
press OK to confirm.
{ Skip }
Select this to set the channel to be
skipped.
The skipped channels can only be
accessed by pressing the corresponding
number button on the remote control.
– Use  keys to choose { Yes } if you
wish to skip this channel, then press OK
to confirm.
{ Fine Tune }
Select this to fine-tune the TV channel
manually if the reception is poor.
– Use
  keys to adjust the frequency.
E Once complete, select
OK
in the
menu and press OK to confirm and exit
to the previous menu page.
 If you do not wish to save any
changes, select
CANCEL
and press OK.
TIPS: Press  to go back to previous menu item.
Press SYSTEM-MENU to exit the menu.
Sorting the TV channels
You may not agree with the sequence in
which the individual TV channels have
been allocated to the programme
numbers. You can use this function to
rearrange all the stored TV channels.
A Press SYSTEM-MENU.
 The system menu appears.
B Use  keys to highlight
{ System Menu - Channel Setup }
and press .
C Use  keys to highlight
{ Sort Channels } and press OK.
 The list of TV channel programmes
appears.
Sort Channels
P001
P002
P003
P004
P005
P006
P007
P008
BC020
SW006
CH008
CH004
GG006
CH010
CH012
CH005
Skip
Unskip
Unskip
Unskip
Skip
Unskip
Unskip
Unskip
P003 CH008 Unskip
D Use  keys to highlight the channel
you want to change and press OK.
 The selected channel will move to the
right side of the screen.
E Use  keys to shift the TV channel to
the desired position and press OK again.
 The selected channel will be inserted
before the current position.
F Repeat steps D~E until you have sorted
all the TV channels you want.
G Press RETURN on the remote control
to go back to the previous menu.
16861_dvdr3305_05_eng5.indd 24 2005-06-29 4:09:37 PM