User manual
English
35
Editing/Finalising Recording (continued)
TIPS: No further recording and editing can be carried out on a finalised DVD+R.
Press to go back to previous menu item. Press DISC MENU to exit.
Rename disc
The original disc name is generated
automatically by the DVD recorder. You
can change the disc name by following
the steps below.
A Press TOP MENU, use keys to
select { Rename Disc } and press OK
.
The keyboard screen appears.
B Use keys to highlight a
character on the keyboard and press OK
to select.
The maximum input is up to 9
characters.
You can use the following keys on the
keyboard screen to edit your input:
BkSp
: to remove the character to
the left of the cursor.
DELETE
: to remove the character to
the right of the cursor.
SPACE
: to create a space between
characters.
CAPS
: to toggle between upper and
lowercase characters.
CLEAR
: to clear the entry field
completely.
C To confirm your entry, select
OK
on
the keyboard and press OK.
The info panel is now updated.
To cancel the changes, select
EXIT
on
the keyboard and press OK.
Erase disc (DVD+RW only)
This erases the content of the
DVD+RW including those that was not
recorded on this DVD recorder. Once
the existing content is erased, it can be
used for recording.
A Press TOP MENU, use keys to
select { Erase Disc } and press OK.
A warning message will appear.
B Select
YES
in the menu to proceed or
NO
to abort, then press OK to
confirm.
Record new title
This function allows you to start a new
recording at the remaining empty space
in the DVD+RW.
A Press TOP MENU, use keys to
select { Record New Title } and press
OK.
B Select the source you want to record
from and press REC
to start
recording.
Overwrite disc (DVD+RW only)
This function allows you to start a new
recording from the beginning of a
DVD+RW regardless of the contents of
the disc.
A Press TOP MENU, use keys to
select { Overwrite disc } and press OK
.
B Select the source you want to record
from and press REC
to start
recording.
16861_dvdr3305_05_eng5.indd 35 2005-06-29 4:10:13 PM