Software Upgrade

ManualsBrandsPhilips ManualsDVD RecorderDVDR3355/37

Philips AVS

DVDR3355 Firmware Upgrade

Firmware Upgrade

We have developed a firmware upgrade to improve your product.

This upgrade is applicable for the following models:

DVDR3355/37

This firmware version improves: Click here for more details

User interface improvement.

Logic Verifier fix.

Playability Improvement.

Note: Before you proceed to upgrade, please be reminded that you need to do configuration again

each time after firmware upgrade!

Upgrade Procedure

Ste

Check your current version

First check your current firmware version to see if you need to upgrade:

1. Keep no disc in DVD tray.

2. Press <0>, <0>, <0>, <9>, <OK> on the Remote Control.

3. The software version is "DVDR33XX_XX_BTX_X, 43.0X.XX" displayed on the TV screen.

4. Compare the version shown on screen with this firmware upgrade version, BT6_5, 43.02.19/43.03.11.

If the current software is lower than BT6_5, proceed to step 2.

If the loader version shown on the screen is 43.02.XX and XX is lower than 19, proceed to step 2.

If the loader version shown on the screen is 43.03.XX and XX is lower than 11, proceed to step 2.

Otherwise, no upgrade is necessary.

Ste

Download Firmware upgrade

Click the link to save the software on your computer.

Ste

Burning Upgrade on CD-R / CD-RW

1. Extract the files by unzipping the zipped file – DVDR33xx_xx_BTx_x.zip

Tip: For more

information on burning

software we refer to

two popular burning

software programs

www.nero.com

www.easycdcreator.com

(Do not rename the filenames)

2. Write the extracted files, “DVDR3355_37.CUB” – not the zip file – onto a blank

CD-R or CD-RW disc, using the following settings:

- File System: ISO 9660 + Joliet

- File name length : max11 chars = 8+3 (Level 1)

- Mode : 2/XA

- Character set : ISO 9660 (ISO norme CD-ROM)

- No multi session

- Write Speed : Low

3. Finalize the disc. (The application may do this automatically.)

4. If you need to upgrade the loader software, select the file PHILIPS_D43.bin if your drive version is

43.02.XX or the file PHILIPS_D43C.bin if your driver version is 43.03.XX

5. Write the selected file onto another blank CD-R or CD-RW disc, using the same settings as above.

6. Finalize the disc. (The application may do this automatically.)

Ste

Apply Upgrade to your Recorder

Summary of content (2 pages)

PAGE 1
Philips AVS DVDR3355 Firmware Upgrade Firmware Upgrade We have developed a firmware upgrade to improve your product. This upgrade is applicable for the following models: DVDR3355/37 This firmware version improves: Click here for more details User interface improvement. Logic Verifier fix. Playability Improvement.
PAGE 2
Philips AVS Power up the recorder and open the DVD tray. Insert the prepared upgrade CD-ROM. Close the tray and the recorder will auto read the disc. Upon recognize the disc, the local display of recorder will show "SW UPGD". The TV screen will show a dialog box titled “Disc Upgrade” 5. Note: The recorder will indicate “Unknown Disc” in the following 2 situations. When the software upgrade is not meant for your recorder (Check the applicable models above) Problem with writing of CD-ROM.