Owner's Manual

English
30
Downmix
This option allows you to set the stereo
analog output of your DVD player.
A In ‘Audio Setup Page’, press S T to
select { Downmix }, then press X.
{ Stereo }
Select this option when output delivers
sound from only the two front speakers.
{ LT/RT }
Select this option if your DVD player is
connected to a Dolby Pro Logic decoder.
B Use S T to select a setting and press
OK to con rm.
Digital Audio
The options included in Digital Audio are:
{Digital Output} and {LPCM Output}.
A In ‘Audio Setup Page’, press S T to
select { Digital Audio }, then press X.
B Press S T to select an item, then press
X to access.
C Use S T to select a setting and press
OK to con rm.
Using the Audio setup menu
A Press SETUP on the remote control.
 The system setup menu appears.
General Audio Video Preference
Downmix
Digital Audio
- - Audio Setup Page - -
B Press W X to select { Audio Setup
Page }.
C Press S T to select an item, then press
X to access.
Example: { Downmix }
 The options for the selected item
appears.
 If the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at
the current state.
D Use S T to select a setting and press
OK to con rm.
Example: { Stereo }
 The setting is selected and setup is
complete.
E To exit, press SETUP.
DVD Menu Options (continued)
TIPS: The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
01-41_dvp1013_F7_eng.indd 3001-41_dvp1013_F7_eng.indd 30 12/16/2008 1:41:06 PM12/16/2008 1:41:06 PM