Manual

Hookups (cont'd) 11
oooo®®®®®m moooQQeeeooooooooo®®®®®e moooQoeeeooooo®ooo®®®®®m moooQQeeeoooo®®ooo®®®®®m moQoQQeeeooooooooo®®®®®m moo.
DVD/VCR to Cable Box or Satellite Receiver and TV
Using only basic RF coaxial cables
This connection will let you use the features of both theVCR and the DVD player.
DVD/VCR
Cable 2 Cable Box/Satellite Receiver
Signal
RF coaxial cable
Connections
RF coaxial cable
Connect a CableTV or Satellite signal to
the DVD/VCR's ANT-IN (Antenna In) jack.
Use an RF coaxial cable (as the one supplied) to connect
the ANT-OUT (Antenna Out) jack on the DVD/VCR to
the IN jack on the Cable Box/Satellite Receiver.
Use a second RF coaxial cable to connect the OUT jack on
the Cable Box/Satellite Receiver to the ANTENNA IN jack
on the TV.
Plug in the power cord of yourTV.Turn on theTV and set it
to channel 3 or 4.
Plug in the power cord of the DVD/VCR.You are ready toturn on the DVD/VCR. Go to page 16 before turning it on.
Remember.,,
There are two ways to connect your Cable Box/Satellite Receiver to the
DVD/VCR.With the connection on this page:
÷ You may watch one channel while recording another. Follow these steps:
1) Put the Cable Box/Satellite Receiver on the same channel as the
DVD/VCR's output channel (03 or 04).The DVD/VCR's output channel
is channel 3 when the DVD/VCR is new.To alternate it between 3 and
4, press and hold (VCR) PLAY I_ on the front of the DVD/VCR for 3-5
seconds during tape playback. For details, see step 4 on page 9. Set the TV
to the Cable Box/Satellite Receiver output channel (03 or 04).
2) Press VCR to put the DVD/VCR in VCR mode.VCR light will appear
on the front of the DVD/VCR.
3) PressVCR/TV on the remote to chooseVCR position.
4) Press SKIP I_I/CH • or SKIP I_I/CH • to select the channel you
want to record at the DVD/VCR. Press RECORD • to start the
recording.
5) PressVCR/TV on the remote once to put the DVD/VCR inTV
position.
6) Select the channel you want to watch at the Cable
Box/Satellite Receiver.
÷ When you play a rape or disc, make sure the Cable Box/Satellite
Receiver is set to the DVD/VCR's output channel (03 or 04).
Set the TV to the Cable Box/Satellite Receiver output channel (03 or
04).
TV's ANTENNA
IN Jack