Manual

Special Effects Playback 33
oooo®®®®®e moeoQooeeoo®®o®oooo®®®®m moeoQQeeeo®®®ooooo®®®®®m moooQQeeo®oooooooo®®®®om moooQQeeeo®®®ooooo®o®®®m moo_
÷ Before you begin, pressVCR soVCR light appears on the front of the
DVDNCR.
Forward and Reverse Searching (SP/LP/SLP) /
Super High Speed Searching (LP/SLP)
During tape playback, press and release I_1_ or _1_1.
A fast forward or reverse picture search will begin.
Press I_1_ or _1_1, then press again. The search speed
will increase. Repeatedly pressing I_1_ or _ will switch
between regular and high speed searching.
To return to normal playback, press PLAY I_.
Viewing a Still Picture
During tape playback, press PAUSE I I. A still picture
will appear on the screen.
To advance the still picture one frame at a time,
press PAUSE I I repeatedly.
To release the still picture and return to playback,
press PLAY I_.
Viewing a Slow Motion Picture
During tape playback, press SLOW. The tape will play
in slow motion.
To return to normal playback, press PLAY I_.
Slow and Still modes will switch
to Stop mode after 5 minutes
to protect the DVD/VCR and
the tape from damage.
SP/LP/SLPmeans this feature will
work with tapes recorded in
StandardPlayback,Long Playbackor
SuperLong Playback.LP/SLPmeans
this feature will work with tapes
recorded in Long Playbackor Super
Long Playback.Tapespeed details
are on page60.
Automatic Operation Features
• IIIIIIIIII Itllooolllllllllllllllll Itllooolllllllllllllllll Itllooolllllllllllllllll Itllooolllllllllllllllll Itl,
The following tape features are available inVCR mode. PressVCRsoVCR light appearson the front of the DVD/VCR, if
necessary.
Automatic Playback
When you put a tape in the DVDIVCR, the power will come on. If the tape's record tab is missing,playback will begin.
If a timer recording is set and "I_" is flashing in the display panel, the power will not come on automatically when
you insert a tape with the record tab intact.
If a timer recording is set and "[3" is flashing in the display panel, the DVD/VCR will eject the tape if the record
tab is missing.
Automatic Rewind, Eject
When a tape is played,fast forwarded or recorded to its end, the tape will rewind to the beginning, stop and eject
itself.This feature does not operate if AUTO REPEAT is ON. Details are on page 31.
Tape Eject
A tape can be ejected with the DVD/VCR power on or off (but the DVD/VCR must be plugged in).
If a timer recording is set and "[]" appears on the display panel, pressing STOP/EJECT •_ (VCR) will turn on
the DVD/VCR and/or cancel the timer recording. Press STOP/EJECT •_ (VCR) again to remove the tape.
Remember to insert a tape and press TIMER SET to reset the timer recording.
Automatic Tracking Adjustment
TheVCR adjusts tracldng automatically to give you the best possible picture quality.With some recordings, however,
you may get a better picture using manual tracldng.
Manual Tracking
To manually adjust the tracking during normal playback and slow motion playback of a videotape, press
SKIP I_IICH • or SKIP I_IICH • on the remote.Tracking will return toAutomaticTracking when you press STOP
• or insert a tape.You can also press SKIP I_IICH • or SKIP I_IICH • to remove vertical jitter in a Still picture.